Improving Transient Performance in Tracking General References Using Composite Nonlinear Feedback Control and Its Application to High-Speed $XY$-Table Positioning Mechanism

We adopt in this paper the newly developed composite nonlinear feedback (CNF) control method to track general target references for systems with input saturation. The original formulation of the CNF control technique is only applicable to set-point tracking, in which the target reference is set to be a constant. In this paper, a reference generator, which is able to produce more general reference signals such as sinusoidal and other waves, will be proposed to supplement the CNF control technique to yield a good performance. The resulting control law comprises the reference generator and a modified CNF control law, which is proven to be capable of tracking a target reference with fast settling time and minimal overshoot. Simulation and experimental results on an XY-table show that the proposed technique gives a very satisfactory performance

[1]  Tong Heng Lee,et al.  Discrete-time composite nonlinear feedback control with an application in design of a hard disk drive servo system , 2003, IEEE Trans. Control. Syst. Technol..

[2]  Matthew C. Turner,et al.  Non-linear tracking control for multivariable constrained input linear systems , 2000 .

[3]  Fang Lin Luo,et al.  Robust and precision motion control system of linear-motor direct drive for high-speed X-Y table positioning mechanism , 2005, IEEE Transactions on Industrial Electronics.

[4]  Tong Heng Lee,et al.  Hard Disk Drive Servo Systems , 2002 .

[5]  Tong Heng Lee,et al.  COMPOSITE NONLINEAR FEEDBACK CONTROL: THEORY AND AN APPLICATION , 2002 .

[6]  Meir Pachter,et al.  Toward improvement of tracking performance nonlinear feedback for linear systems , 1998 .

[7]  L. Cai,et al.  A smooth robust nonlinear controller for robot manipulators with joint stick-slip friction , 1993, [1993] Proceedings IEEE International Conference on Robotics and Automation.

[8]  Muhammad H. Rashid,et al.  Robust high speed and high precision linear motor direct-drive XY-table motion system , 2004 .

[9]  Tong Heng Lee,et al.  Modeling and compensation of nonlinearities and friction in a micro hard disk drive servo system with nonlinear feedback control , 2005, IEEE Transactions on Control Systems Technology.

[10]  Hyuk Lim,et al.  Position control of X-Y table at velocity reversal using presliding friction characteristics , 2003, IEEE Trans. Control. Syst. Technol..

[11]  Kok Kiong Tan,et al.  Geometrical error compensation of precision motion systems using radial basis function , 2000, IEEE Trans. Instrum. Meas..

[12]  Hyuk Lim,et al.  Position control of XY table in CNC machining center with non-rigid ballscrew , 2000, Proceedings of the 2000 American Control Conference. ACC (IEEE Cat. No.00CH36334).

[13]  Kemao Peng,et al.  On the improvement of transient performance in tracking control for discrete-time systems with input saturation and disturbances , 2005, 2005 International Conference on Control and Automation.

[14]  Alfred Gray,et al.  Modern differential geometry of curves and surfaces with Mathematica (2. ed.) , 1998 .

[15]  Clark J. Radcliffe,et al.  Robust nonlinear stick-slip friction compensation , 1991 .

[16]  N. Fujii,et al.  X-Y linear synchronous motors without force ripple and core loss for precision two-dimensional drives , 2002 .

[17]  Tong Heng Lee,et al.  Composite nonlinear feedback control for linear systems with input saturation: theory and an application , 2003, IEEE Trans. Autom. Control..

[18]  Masayoshi Tomizuka,et al.  A sensitivity optimization approach to design of a disturbance observer in digital motion control systems , 2000 .

[19]  Jun Oh Jang,et al.  Deadzone compensation of an XY-positioning table using fuzzy logic , 2005, IEEE Trans. Ind. Electron..