Simulation of two-dimensional photoresist etching process in integrated circuit fabrication using cellular automata

A new algorithm for the simulation if photoresist etching, based on cellular automata, is presented in this paper. The algorithm is fast and robust and has been successfully tested using all known etch-rate distribution test functions. The algorithm performs very well, even in areas where the fluctuation in etch rates is wide and sharp.

[1]  Andrew R. Neureuther,et al.  Algorithms for simulation of three-dimensional etching , 1994, IEEE Trans. Comput. Aided Des. Integr. Circuits Syst..

[2]  A. Neureuther,et al.  Modeling projection printing of positive photoresists , 1975, IEEE Transactions on Electron Devices.

[3]  E. W. Scheckler,et al.  An efficient volume-removal algorithm for practical three-dimensional lithography simulation with experimental verification , 1993, IEEE Trans. Comput. Aided Des. Integr. Circuits Syst..

[4]  Stephen Wolfram,et al.  Cellular Automata And Complexity , 1994 .

[5]  J. H. Carter,et al.  Effects Of Defocus On Photolithographic Images Obtained With Projection-Printing Systems , 1978, Other Conferences.

[6]  Andrew R. Neureuther,et al.  Models and algorithms for three-dimensional topography simulation with SAMPLE-3D , 1994, IEEE Trans. Comput. Aided Des. Integr. Circuits Syst..

[7]  Yiannis Karafyllidis,et al.  Simulation of multiple etch fronts , 1991 .

[8]  J. Tyson,et al.  A cellular automaton model of excitable media. II: curvature, dispersion, rotating waves and meandering waves , 1990 .

[9]  S Subramanian.  Rapid calculation of defocused partially coherent images. , 1981, Applied optics.

[10]  Andrew W. Neureuther.  Understanding Lithography Technology Issues through Simulation , 1993 .

[11]  Bastien Chopard,et al.  Cellular automata model for the diffusion equation , 1991 .

[12]  P. Jain,et al.  Influence of axial chromatic aberration in projection printing , 1981, IEEE Transactions on Electron Devices.

[13]  M. Gerhardt,et al.  A cellular automaton describing the formation of spatially ordered structures in chemical systems , 1989 .

[14]  Andrew R. Neureuther,et al.  Line‐Profile resist development simulation techniques , 1977 .