Insight into the microstructural and durability characteristics of 3D printed concrete: Cast versus printed specimens

[1]  E. Ekiert,et al.  The effect of using recycled PET aggregates on mechanical and durability properties of 3D printed mortar , 2022, Construction and Building Materials.

[2]  T. Han,et al.  Pore and Solid Characterizations of Interfacial Transition Zone of Mortar Using Microcomputed Tomography Images , 2021, Journal of Materials in Civil Engineering.

[3]  J. Sanjayan,et al.  Microstructural characterization of 3D printed concrete , 2021 .

[4]  V. Mechtcherine,et al.  Mix design concepts for 3D printable concrete: A review , 2021 .

[5]  T. Ding,et al.  Large-scale 3D printing concrete technology: Current status and future opportunities , 2021 .

[6]  Eujin Pei,et al.  Processes and materials used for direct writing technologies: A review , 2021 .

[7]  Lihai Zhang,et al.  Mechanical and microstructural evolution of 3D printed concrete with polyethylene fiber and recycled sand at elevated temperatures , 2021, Construction and Building Materials.

[8]  G. Aouad,et al.  Durability assessment and microstructural analysis of 3D printed concrete exposed to sulfuric acid environments , 2021, Construction and Building Materials.

[9]  J. Sanjayan,et al.  Fiber orientation effects on ultra-high performance concrete formed by 3D printing , 2021 .

[10]  D. Stephan,et al.  The effects of nanosilica on the fresh and hardened properties of 3D printable mortars , 2021 .

[11]  J. Sanjayan,et al.  3D printing eco-friendly concrete containing under-utilised and waste solids as aggregates , 2021, Cement and Concrete Composites.

[12]  V. Mechtcherine,et al.  The effects of nano- and micro-sized additives on 3D printable cementitious and alkali-activated composites: a review , 2021, Applied Nanoscience.

[13]  D. Stephan,et al.  Investigation of additive incorporation on rheological, microstructural and mechanical properties of 3D printable alkali-activated materials , 2021, Materials & Design.

[14]  Yu Chen,et al.  Characterization of air-void systems in 3D printed cementitious materials using optical image scanning and X-ray computed tomography , 2021 .

[15]  D. Stephan,et al.  3D printable lightweight cementitious composites with incorporated waste glass aggregates and expanded microspheres – Rheological, thermal and mechanical properties , 2021 .

[16]  A. du Plessis,et al.  An investigation into the porosity of extrusion-based 3D printed concrete , 2021 .

[17]  D. Stephan,et al.  Evaluating the effects of nanosilica on the material properties of lightweight and ultra-lightweight concrete using image-based approaches , 2020, Construction and Building Materials.

[18]  M. Kaszyńska,et al.  3D Concrete Printing for Sustainable Construction , 2020, Energies.

[19]  Jihun Park,et al.  Buildability and Mechanical Properties of 3D Printed Concrete , 2020, Materials.

[20]  Weiwei Li,et al.  3D Printing Cementitious Materials Containing Nano-CaCO3: Workability, Strength, and Microstructure , 2020, Frontiers in Materials.

[21]  Penghuan Liu,et al.  Effect of nanomaterials on the mechanical properties and microstructure of cement mortar under low air pressure curing , 2020 .

[22]  D. Stephan,et al.  The Effect of Lightweight Concrete Cores on the Thermal Performance of Vacuum Insulation Panels , 2020, Materials.

[23]  A. Zieliński,et al.  Effect of Curing Methods on Shrinkage Development in 3D-Printed Concrete , 2020, Materials.

[24]  Erik Schlangen,et al.  Improving printability of limestone-calcined clay-based cementitious materials by using viscosity-modifying admixture , 2020, Cement and Concrete Research.

[25]  J. Assaad,et al.  Qualitative assessment of interfacial bonding in 3D printing concrete exposed to frost attack , 2020 .

[26]  J. Kruger,et al.  An experimental study of the behavior of 3D printed concrete at elevated temperatures , 2020 .

[27]  Mirosław Pajor,et al.  Automation in the Construction of a 3D-Printed Concrete Wall with the Use of a Lintel Gripper , 2020, Materials.

[28]  S. El-Sayegh,et al.  A critical review of 3D printing in construction: benefits, challenges, and risks , 2020, Archives of Civil and Mechanical Engineering.

[29]  T. Han,et al.  Overview of the use of micro-computed tomography (micro-CT) to investigate the relation between the material characteristics and properties of cement-based materials , 2019 .

[30]  Hojae Lee,et al.  Evaluation of the Mechanical Properties of a 3D-Printed Mortar , 2019, Materials.

[31]  Ming Jen Tan,et al.  Printability region for 3D concrete printing using slump and slump flow test , 2019, Composites Part B: Engineering.

[32]  V. Cnudde,et al.  Microstructural Characterization of 3D Printed Cementitious Materials , 2019, Materials.

[33]  Xiaodong Hou,et al.  Microstructure characteristics and fractal analysis of 3D-printed sandstone using micro-CT and SEM-EDS , 2019, Journal of Petroleum Science and Engineering.

[34]  R. Felicetti,et al.  Fire spalling sensitivity of high-performance concrete in heated slabs under biaxial compressive loading , 2019, Materials and Structures.

[35]  Viktor Mechtcherine,et al.  Effects of layer-interface properties on mechanical performance of concrete elements produced by extrusion-based 3D-printing , 2018, Construction and Building Materials.

[36]  Yunsheng Zhang,et al.  Nondestructive monitoring the deterioration process of cement paste exposed to sodium sulfate solution by X-ray computed tomography , 2018, Construction and Building Materials.

[37]  Jan Olek,et al.  Additive Manufacturing and Performance of Architectured Cement‐Based Materials , 2018, Advanced materials.

[38]  Ming Jen Tan,et al.  Time gap effect on bond strength of 3D-printed concrete , 2018, Virtual and Physical Prototyping.

[39]  Dietmar Stephan,et al.  The Influence of Nanomaterials on the Thermal Resistance of Cement-Based Composites—A Review , 2018, Nanomaterials.

[40]  D. Stephan,et al.  The Effects of Anisotropic Insulations with Different Spatial Distributions on Material Properties of Mortar Specimens , 2017, International Journal of Concrete Structures and Materials.

[41]  D. Stephan,et al.  Investigation of characteristics and responses of insulating cement paste specimens with Aer solids using X-ray micro-computed tomography , 2016 .

[42]  T. Han,et al.  Effects of anisotropic voids on thermal properties of insulating media investigated using 3D printed samples , 2016 .

[43]  Jérôme Rose,et al.  Micro- and nano-X-ray computed-tomography: A step forward in the characterization of the pore network of a leached cement paste , 2015 .

[44]  J. Bullard,et al.  Defining shape measures for 3D star-shaped particles: Sphericity, roundness, and dimensions , 2013 .

[45]  M. Stampanoni,et al.  3D experimental investigation of the microstructure of cement pastes using synchrotron X-ray microtomography (μCT) , 2007 .

[46]  S. Torquato,et al.  Lineal-path function for random heterogeneous materials. , 1992, Physical review. A, Atomic, molecular, and optical physics.