论文信息 - The effect of a new method of fluid flow control on submicron particle classification in gas-cyclones

The effect of a new method of fluid flow control on submicron particle classification in gas-cyclones

Abstract The purpose of this paper is to study the effects of a secondary flow injection method on submicron particle separation in a cyclone. It is found that particle collection efficiency increased with an increased secondary flow rate in the upper cylindrical section of the cyclone.In order to achieve a high particle collection efficiency, the location of the secondary flow injection should be close to the upper plate and a high injection velocity should be used.The use of a newly developed cyclone (type A) resulted in a high particle collection efficiency. Nearly all particles are collected by the secondary injection fluid flow. Three-dimensional simulation results are qualitatively agreed with the experimental data.

[1] Keisuke Hashimoto,et al. Size Classification of Submicron Powder by Air Cyclone and Three-Dimensional Analysis , 1991 .

[2] Numerical Study of High Reynolds Number Flow around a Circular Cylinder , 1983 .

[3] A. Miyatake,et al. Methods of Numerically Analyzing and Visually Measuring Transport Phenomena in Chemical Equipment. Fine Control of Cut Size with Dry Cyclone. , 2001 .

[4] Effect of blow-down on fluid flow and particle movement in cyclone classifier , 1995 .

[5] Takahiro Nakamura,et al. Elaborate Classification of Flyash Particles by Bench Scale Air Cyclone. , 1997 .

[6] S. Patankar. Numerical Heat Transfer and Fluid Flow , 2018, Lecture Notes in Mechanical Engineering.

[7] Dry Submicron Classification by a Small Blow Down Cyclone [Translated]† , 1993 .

[8] 小川明. Separation of particles from air and gases , 1984 .

[9] Fine Particle Separation by Revised Type Air-Cyclone Classifier , 1993 .

[10] K. Kuwahara,et al. Computation of high Reynolds number flow around a circular cylinder with surface roughness , 1984 .