Broadband Sequential Power Amplifier With Doherty-Type Active Load Modulation

This paper presents the concept and the detailed analysis of a sequential power amplifier with Doherty-type active load modulation (SPA-D). By introducing a Doherty-type output combiner into the conventional sequential power amplifier (PA), highly efficient amplification over broadband and wide dynamic range for the reconfigurable output power back-off can be achieved. The proposed amplifier mimics both the sequential and the Doherty PAs by exploiting the active load modulation region that has not been considered in the design of Doherty amplifiers. A broadband SPA-D prototype having 8-dB output back-off power (OBO) is designed and implemented. The experimental results exhibit drain efficiencies of 50%-75% at 7-10-dB OBO and 57%-70% at peak power with Doherty-like behavior over 700-MHz bandwidth centered at 2.35 GHz. The ability to easily reconfigure the breakpoint is experimentally verified, providing a convenient means for optimizing the amplifier efficiency according to various wireless standards. In addition, by using a memoryless digital predistortion, the spectrum emission mask required for long-term evolution down link can be fulfilled, making it well suited for applications in modern wireless transmitters.

[1]  Youngcheol Park,et al.  Analysis and optimization of asymmetric sequential power amplifier , 2010, 2010 Asia-Pacific Microwave Conference.

[2]  P. Colantonio,et al.  Design of a Concurrent Dual-Band 1.8–2.4-GHz GaN-HEMT Doherty Power Amplifier , 2012, IEEE Transactions on Microwave Theory and Techniques.

[3]  Slim Boumaiza,et al.  A Mixed-Technology Asymmetrically Biased Extended and Reconfigurable Doherty Amplifier With Improved Power Utilization Factor , 2013, IEEE Transactions on Microwave Theory and Techniques.

[4]  W.H. Doherty,et al.  A New High Efficiency Power Amplifier for Modulated Waves , 1936, Proceedings of the Institute of Radio Engineers.

[5]  Rolf H. Jansen,et al.  Broadband Doherty Power Amplifier via Real Frequency Technique , 2012, IEEE Transactions on Microwave Theory and Techniques.

[6]  Fadhel M. Ghannouchi,et al.  Design Methodology for Dual-Band Doherty Power Amplifier With Performance Enhancement Using Dual-Band Offset Lines , 2012, IEEE Transactions on Industrial Electronics.

[7]  F. Giannini,et al.  A Doherty Architecture With High Feasibility and Defined Bandwidth Behavior , 2013, IEEE Transactions on Microwave Theory and Techniques.

[8]  Bumman Kim,et al.  A highly efficient asymmetric Doherty Power Amplifier with a new output combining circuit , 2011, 2011 IEEE International Conference on Microwaves, Communications, Antennas and Electronic Systems (COMCAS 2011).

[9]  Slim Boumaiza,et al.  An Extended-Bandwidth Three-Way Doherty Power Amplifier , 2013, IEEE Transactions on Microwave Theory and Techniques.

[10]  Andrei Grebennikov,et al.  A high-efficiency 100-W four-stage Doherty GaN HEMT power amplifier module for WCDMA systems , 2011, 2011 IEEE MTT-S International Microwave Symposium.

[11]  J. Laskar,et al.  Analysis and design of a high-efficiency multistage Doherty power amplifier for wireless communications , 2005, IEEE Transactions on Microwave Theory and Techniques.

[12]  Franco Giannini,et al.  High Efficiency RF and Microwave Solid State Power Amplifiers , 2009 .

[13]  T. Brazil,et al.  A wideband Sequential Power Amplifier , 2014, 2014 IEEE MTT-S International Microwave Symposium (IMS2014).

[14]  G. Ghione,et al.  3–3.6-GHz Wideband GaN Doherty Power Amplifier Exploiting Output Compensation Stages , 2012, IEEE Transactions on Microwave Theory and Techniques.

[15]  Renato Negra,et al.  A highly efficient wideband asymmetric Doherty power amplifier with 10 dB output power back-off , 2013, 2013 European Microwave Conference.

[16]  S. C. Cripps,et al.  RF Power Amplifiers for Wireless Communications , 1999 .

[17]  L. C. N. de Vreede,et al.  On the bandwidth performance of Doherty amplifiers , 2013, 2013 IEEE International Wireless Symposium (IWS).

[18]  Thomas Lehmann,et al.  Design and performance of sequential power amplifiers , 2008, 2008 IEEE MTT-S International Microwave Symposium Digest.

[19]  Franco Giannini,et al.  A Wideband Doherty Architecture With 36% of Fractional Bandwidth , 2013, IEEE Microwave and Wireless Components Letters.

[20]  S. Boumaiza,et al.  A Modified Doherty Configuration for Broadband Amplification Using Symmetrical Devices , 2012, IEEE Transactions on Microwave Theory and Techniques.

[21]  Binboga Siddik Yarman,et al.  Design of Ultra Wideband Antenna Matching Networks: Via Simplified Real Frequency Technique , 2008 .

[22]  Renato Negra,et al.  Design of Concurrent Multiband Doherty Power Amplifiers for Wireless Applications , 2013, IEEE Transactions on Microwave Theory and Techniques.

[23]  G. Matthaei.  Tables of Chebyshev impedance–transforming networks of low-pass filter form , 1964 .

[24]  F. Raab,et al.  Power amplifiers and transmitters for RF and microwave , 2002 .

[25]  L.C.N. de Vreede,et al.  A High-Efficiency 100-W GaN Three-Way Doherty Amplifier for Base-Station Applications , 2008, IEEE Transactions on Microwave Theory and Techniques.

[26]  Georg Boeck,et al.  Wideband harmonically-tuned GaN Doherty power amplifier , 2012, 2012 IEEE/MTT-S International Microwave Symposium Digest.

[27]  D. Peroulis,et al.  Design of Adaptive Highly Efficient GaN Power Amplifier for Octave-Bandwidth Application and Dynamic Load Modulation , 2012, IEEE Transactions on Microwave Theory and Techniques.

[28]  C. Fager,et al.  A Modified Doherty Power Amplifier With Extended Bandwidth and Reconfigurable Efficiency , 2013, IEEE Transactions on Microwave Theory and Techniques.

[29]  C. Weitzel,et al.  RF power amplifiers for wireless communications , 2002, 24th Annual Technical Digest Gallium Arsenide Integrated Circuit (GaAs IC) Symposiu.

[30]  Renato Negra,et al.  Novel design of a 10 dB back-off broadband sequential Doherty power amplifier for wireless applications , 2014, 2014 IEEE Topical Conference on Power Amplifiers for Wireless and Radio Applications (PAWR).

[31]  Renato Negra,et al.  Design of a broadband three-way sequential Doherty power amplifier for modern wireless communications , 2014, 2014 IEEE MTT-S International Microwave Symposium (IMS2014).