The influences of recycle on performance of baffled double-pass flat-plate solar air heaters with internal fins attached

A new device for inserting an absorber plate to divide a flat-plate channel into two parts with fins attached by baffles and external recycling at the ends is presented. The proposed device substantially improves the heat-transfer efficiency. Experimental and theoretical investigations into the device efficiency are presented. The theoretical prediction agreement with the measured values from the experimental results is good. The experimental and theoretical results are represented graphically and compared with data from the downward-type single-pass solar air heaters of the same size without recycling. Considerable heat-transfer improvement is obtained by employing baffled double-pass operations with external recycling and fin attached over and under the absorber plate. The recycle ratio and absorber plate location influences on the heat-transfer efficiency and on the power consumption increment are also discussed.

[1]  W. Charters,et al.  An experimental investigation of forced-convective heat transfer for fully-developed turbulent flow in a rectangular duct with asymmetric heating , 1970 .

[2]  N. E. Wijeysundera,et al.  Thermal performance study of two-pass solar air heaters , 1982 .

[3]  Chii-Dong Ho,et al.  Heat-transfer enhancement in double-pass flat-plate solar air heaters with recycle , 2005 .

[4]  James O. Wilkes,et al.  Fluid Mechanics for Chemical Engineers , 1998 .

[5]  Suppramaniam Satcunanathan,et al.  A two-pass solar air heater , 1973 .

[6]  H. P. Garg,et al.  Theory of multiple-pass solar air heaters , 1985 .

[7]  Chii-Dong Ho,et al.  An analytical study of heat-transfer efficiency in laminar counterflow concentric circular tubes with external refluxes , 2003 .

[8]  Yiannis Tripanagnostopoulos,et al.  Improved PV/T solar collectors with heat extraction by forced or natural air circulation , 2007 .

[9]  B. N. Prasad,et al.  Investigation for the optimal thermohydraulic performance of artificially roughened solar air heaters , 2000 .

[10]  C. Bennett,et al.  Momentum, Heat, and Mass Transfer , 1962 .

[11]  Ho-Ming Yeh,et al.  Energy balances for upward-type baffled solar air heaters , 1994 .

[12]  A. Mohamad.  High efficiency solar air heater , 1997 .

[13]  W. Beckman,et al.  Solar Engineering of Thermal Processes , 1985 .

[14]  Chii-Dong Ho,et al.  Improvement in device performance of multi-pass flat-plate solar air heaters with external recycle , 2005 .

[15]  Tao Liu,et al.  Analytical and experimental studies on the thermal performance of cross-corrugated and flat-plate solar air heaters , 2007 .

[16]  Austin Whillier,et al.  Plastic covers for solar collectors , 1963 .

[17]  C. Ho,et al.  Mass-Transfer Enhancement in Double-Pass Mass Exchangers with External Refluxes , 2001 .

[18]  M. K. Selcuk.  Solar air heaters and their applications , 1977 .

[19]  D. Yogi Goswami,et al.  Principles of Solar Engineering , 1978 .

[20]  S. Klein,et al.  Calculation of the monthly-average transmittance-absorptance product , 1979 .

[21]  E. Sparrow,et al.  Convective-radiative interaction in a parallel plate channel - Application to air-operated solar collectors , 1980 .

[22]  D. J. Close,et al.  The behaviour of adsorbent energy storage beds , 1976 .

[23]  W. Kays,et al.  HEAT TRANSFER IN ANNULAR PASSAGES. SIMULTANEOUS DEVELOPMENT OF VELOCITY AND TEMPERATURE FIELDS IN LAMINAR FLOW , 1964 .

[24]  J. Whitelaw,et al.  Convective heat and mass transfer , 1966 .

[25]  Ho-Ming Yeh,et al.  Effects of free convection on collector efficiencies of solar air heaters , 1986 .

[26]  Yeh Ho-Ming.  Theory of baffled solar air heaters , 1992 .