Damage resistance and damage tolerance of dispersed CFRP laminates: Effect of the mismatch angle between plies

Abstract Damage resistance and damage tolerance to impact events is the most demanding criteria in sizing several aeronautical composites. Tailoring the laminate ply sequence represents an effort towards improving those properties. In this work, the effect of the mismatch angle between the adjacent plies on the damage resistance and damage tolerance of CFRP composites was investigated. Three configurations were considered: a standard configuration (mismatch angle of 45°), a dispersed laminate with small mismatch angles (between 10° and 30°) and another with larger mismatch angles (55–80°). Compared to the other studies in the literature, the main difference is to assess the damage resistance and the damage tolerance for specimens with the same bending stiffness characteristics and the same number of interfaces. It is worth remarking that without using the dispersed laminates, it is impossible to design laminates with the same bending stiffness. The results showed that the dispersed configuration with small mismatch angles had a superior response compared to the other configurations, with respect to the indentation, the dissipated energy and the residual compressive strength (up to 30% increment). These improvements can be justified by the possible effects of the mismatch angle on the damage initiation and/or the damage propagation.

[1]  Paul Straznicky,et al.  Effects of stacking sequence on the impact resistance in composite laminates. Part 2: prediction method , 1998 .

[2]  Ahmet S. Yigit,et al.  Limits of asymptotic solutions in low-velocity impact of composite plates , 2007 .

[3]  Constantinos Soutis,et al.  Prediction of the post-impact compressive strength of CFRP laminated composites , 1996 .

[4]  R. Kemp,et al.  The effect of stacking sequence on impact damage in a carbon fibre/epoxy composite , 1995 .

[5]  J. A. Bailie,et al.  A SUMMARY AND REVIEW OF COMPOSITE LAMINATE DESIGN GUIDELINES , 1997 .

[6]  Serge Abrate,et al.  Modeling of impacts on composite structures , 2001 .

[7]  M. Pavier,et al.  Compressive failure of composite laminates containing multiple delaminations , 2005 .

[8]  Valentina Lopresto,et al.  Influence of material thickness on the response of carbon-fabric/epoxy panels to low velocity impact , 1999 .

[9]  Brian Falzon,et al.  Delamination threshold load for dynamic impact on plates , 2006 .

[10]  Pedro P. Camanho,et al.  Simulation of drop-weight impact and compression after impact tests on composite laminates , 2012 .

[11]  Rahul,et al.  Optimization of FRP composites against impact induced failure using island model parallel genetic algorithm , 2005 .

[12]  Rahul,et al.  Multi-objective optimization of hybrid laminates subjected to transverse impact , 2006 .

[13]  Francesco Aymerich,et al.  Optimization of laminate stacking sequence for maximum buckling load using the ant colony optimization (ACO)metaheuristic , 2008 .

[14]  W. M. Banks,et al.  Energy absorption and bending stiffness in CFRP laminates : the effect of 45º plies , 2008 .

[15]  E. V. González,et al.  Damage resistance and damage tolerance of dispersed CFRP laminates: Design and optimization , 2013 .

[16]  Fu-Kuo Chang,et al.  The In Situ Ply Shear Strength Distributions in Graphite/Epoxy Laminated Composites , 1987 .

[17]  Paul Straznicky,et al.  Effects of stacking sequence on the impact resistance in composite laminates — Part 1: parametric study , 1998 .

[18]  C. Sun,et al.  Prediction of impact induced penetration and delamination in thick composite laminates , 1997 .

[19]  T. S. Ramamurthy,et al.  Estimation of impact-induced damage in CFRP laminates through ultrasonic imaging , 1998 .

[20]  Pedro P. Camanho,et al.  Effects of ply clustering in laminated composite plates under low-velocity impact loading , 2011 .

[21]  R. Olsson,et al.  Investigation of Impact Damage in Multi-Directional Tape Laminates and its Effect on Local Tensile Stiffness , 2008 .

[22]  Tien-Wei Shyr,et al.  Impact resistance and damage characteristics of composite laminates , 2003 .

[23]  G.A.O. Davies,et al.  Numerical modelling of impact damage , 1994 .

[24]  B. Necib,et al.  The effect of stacking sequence on the impact-induced damage in cross-ply E-glass/epoxy composite plates , 2009 .

[25]  John Morton,et al.  The impact resistance of composite materials — a review , 1991 .

[26]  Li Ma,et al.  Low-velocity impact and residual tensile strength analysis to carbon fiber composite laminates , 2010 .

[27]  T. A. Sebaey,et al.  Ant Colony Optimization for dispersed laminated composite panels under biaxial loading , 2011 .

[28]  Luis Reis,et al.  Damage growth analysis of low velocity impacted composite panels , 1997 .

[29]  Christophe Bouvet,et al.  Impact and compression after impact experimental study of a composite laminate with a cork thermal shield , 2007 .

[30]  Dirk Vandepitte,et al.  Failure analysis of low velocity impact on thin composite laminates : Experimental and numerical approaches , 2008 .

[31]  S. Hong,et al.  On the relationship between impact energy and delamination area , 1989 .

[32]  S. Turner,et al.  Flexed plate impact testing of carbon fibre-reinforced polymer composites , 1985 .

[33]  Haitao Cui,et al.  An integrated method for predicting damage and residual tensile strength of composite laminates under low velocity impact , 2009 .

[34]  Zafer Gürdal,et al.  Low-velocity impact damage on dispersed stacking sequence laminates. Part II: Numerical simulations , 2009 .

[35]  Ahmet S. Yigit,et al.  SCALING OF LOW-VELOCITY IMPACT RESPONSE IN COMPOSITE STRUCTURES , 2009 .

[36]  Mustafa Şahin,et al.  Buckling behavior and compressive failure of composite laminates containing multiple large delaminations , 2009 .

[37]  A. Mayer,et al.  Influence of fiber direction and mixed-mode ratio on delamination fracture toughness of carbon/epoxy laminates , 2003 .

[38]  Serge Abrate,et al.  Impact on Composite Structures , 1998 .

[39]  Valentina Lopresto,et al.  The significance of indentation in the inspection of carbon fibre-reinforced plastic panels damaged by low-velocity impact , 2000 .

[40]  G. Clark,et al.  Modelling of impact damage in composite laminates , 1989 .

[41]  Singiresu S. Rao.  Engineering Optimization : Theory and Practice , 2010 .

[42]  Zafer Gürdal,et al.  LOW-VELOCITY IMPACT DAMAGE ON DISPERSED STACKING SEQUENCE LAMINATES. PART I: EXPERIMENTS , 2009 .

[43]  Robin Olsson,et al.  Mass criterion for wave controlled impact response of composite plates , 2000 .

[44]  C. Ong,et al.  Low velocity impact behavior of prestressed composite laminates , 1997 .

[45]  Hiroshi Suemasu,et al.  Multiple Delaminations and their Severity in Circular Axisymmetric Plates Subjected to Transverse Loading , 1996 .

[46]  John Morton,et al.  Impact response of tough carbon fibre composites , 1989 .