Low-temperature synthesis of K0.5Na0.5NbO3 ceramics in a wide temperature window via cold-sintering assisted sintering method and enhanced electrical properties

[1]  X. Chen,et al.  Dense LiF microwave dielectric ceramics with near-zero linear shrinkage during sintering , 2022, Ceramics International.

[2]  B. Sahoo,et al.  High d33 Lead-Free Piezoceramics: A Review , 2022, Journal of Electronic Materials.

[3]  S. Trolier-McKinstry,et al.  Cold Sintering of PZT 2-2 Composites for High Frequency Ultrasound Transducer Arrays , 2021, Actuators.

[4]  S. Trolier-McKinstry,et al.  Comparison of different sintering aids in cold sinter‐assisted densification of lead zirconate titanate , 2021 .

[5]  Xiao-ming Chen,et al.  Improved ferroelectric and piezoelectric properties of (Na0.5K0.5)NbO3 ceramics via sintering in low oxygen partial pressure atmosphere and adding LiF , 2021 .

[6]  C. Randall,et al.  Cold sintering ZnO based varistor ceramics with controlled grain growth to realize superior breakdown electric field , 2021 .

[7]  F. Liu,et al.  Effects of the post-annealing reductive-atmosphere-sintered (K0.48Na0.52)NbO3 lead-free piezoceramics , 2020 .

[8]  S. Trolier-McKinstry,et al.  Model for the cold sintering of lead zirconate titanate ceramic composites , 2020, Journal of the American Ceramic Society.

[9]  Y. Xing,et al.  Effect of dwell time on cold sintering assisted sintering based highly transparent 0.9K0.5Na0.5NbO3-0.1LiBiO3 ceramics , 2020 .

[10]  C. Randall,et al.  Single‐step densification of nanocrystalline CeO 2 by the cold sintering process , 2020 .

[11]  C. Randall,et al.  Thermosetting polymers in cold sintering: The fabrication of ZnO‐polydimethylsiloxane composites , 2020 .

[12]  J. Maria,et al.  Single step densification of high permittivity BaTiO3 ceramics at 300 ºC , 2020 .

[13]  N. Zhang,et al.  Lead-Free (K,Na)NbO3-Based Materials: Preparation Techniques and Piezoelectricity , 2020, ACS omega.

[14]  Tingting Li,et al.  Effect of NaCl on the microstructure and electrical properties of K0.5Na0.5NbO3 ceramics prepared by cold sintering process , 2019, Journal of Materials Science: Materials in Electronics.

[15]  Hanying Li,et al.  Composition, microstructure and electrical properties of K0.5Na0.5NbO3 ceramics fabricated by cold sintering assisted sintering , 2019, Journal of the European Ceramic Society.

[16]  C. Randall,et al.  Applying cold sintering process to a proton electrolyte material: CsH2PO4 , 2019, Journal of the European Ceramic Society.

[17]  X. Chen,et al.  Plastic deformation and effects of water in room‐temperature cold sintering of NaCl microwave dielectric ceramics , 2018 .

[18]  E. Suvacı,et al.  Chemical stability of KNbO3, NaNbO3, and K0.5Na0.5NbO3 in aqueous medium , 2018 .

[19]  S. Trolier-McKinstry,et al.  Cold sintering and electrical characterization of lead zirconate titanate piezoelectric ceramics , 2018 .

[20]  Bo Wu,et al.  Enhanced electrical properties, phase structure, and temperature-stable dielectric of (K0.48Na0.52)NbO3-Bi0.5Li0.5ZrO3 ceramics , 2018 .

[21]  M. Lanagan,et al.  Contrasting energy efficiency in various ceramic sintering processes , 2017 .

[22]  A. Studart,et al.  Geologically-inspired strong bulk ceramics made with water at room temperature , 2017, Nature Communications.

[23]  Jing Guo,et al.  Cold Sintering Process: A Novel Technique for Low‐Temperature Ceramic Processing of Ferroelectrics , 2016 .

[24]  Jing Guo,et al.  Cold Sintering: A Paradigm Shift for Processing and Integration of Ceramics. , 2016, Angewandte Chemie.

[25]  L. Fang,et al.  (K0.5Na0.5)NbO3–Bi(Zn0.5Zr0.5)O3 perovskite ceramics: High relative permittivity, low dielectric loss and good thermal stability , 2015 .

[26]  Jari Juuti,et al.  Dielectric Properties of Lithium Molybdate Ceramic Fabricated at Room Temperature , 2014 .

[27]  Ke Wang,et al.  (K, Na)NbO3‐Based Lead‐Free Piezoceramics: Fundamental Aspects, Processing Technologies, and Remaining Challenges , 2013 .

[28]  Y. Mai,et al.  Antiferroelectric-like properties and enhanced polarization of Cu-doped K0.5Na0.5NbO3 piezoelectric ceramics , 2012 .

[29]  S. Nahm,et al.  Low‐Temperature Sintering and Piezoelectric Properties of (Na0.5K0.5)NbO3 Lead‐Free Piezoelectric Ceramics , 2010 .

[30]  S. Priya,et al.  Low Temperature Sintering and Piezoelectric Properties of CuO-Doped (K0.5Na0.5)NbO3 Ceramics , 2008 .

[31]  Jingfeng Li,et al.  Effect of Sintering Temperature on Electrical Properties of Na0.5K0.5NbO3 Lead-Free Piezoelectric Ceramics Prepared by Normal Sintering , 2007 .

[32]  G. Shirane,et al.  Stability of the monoclinic phase in the ferroelectric perovskite PbZr1-xTixO3 , 2000, cond-mat/0006152.

[33]  A. Stacy,et al.  Low-temperature synthesis of superconducting La2-xMxCuO4: direct precipitation from NaOH/KOH melts , 1988 .

[34]  L. Egerton,et al.  Piezoelectric and Dielectric Properties of Ceramics in the System Potassium—Sodium Niobate , 1959 .