Photoacoustic detection of ozone using a quantum cascade laser

A9 .5-µm pulsed quantum cascade laser (QCL) and a differential photo- acoustic (PA) detector were used to measure trace concentrations of ∼ 100 ppbv ozone at ambient pressure with high selectivity. The QCL was tuned by temperature variation between −41 ◦ C and 30.6 ◦ C and the corresponding wavelengths were determined by the PA spectrum of CO2. Good agreement was found between the measured PA spectrum and the simulated HITRAN spectrum of ozone. The PA signal showed a lin- ear dependence on the ozone concentration in the investigated 4300-100 ppbv range. In comparison with recently published results, in which a similar QCL in combina- tion with an optical absorption analysis technique was applied, an improvement in the ozone-detection sensitivity by a factor of about 200 was achieved.