The self-formatting barrier characteristics of Cu-Mg/SiO2 and Cu-Ru/SiO2 films for Cu interconnects

Abstract To substitute or to supplement diffusion barrier as reducing lateral dimension of interconnects, the alloying Mg and Ru to Cu was investigated as a self-formatting barrier in terms of their resistivity, adhesion, and barrier characteristics After annealing at 400 °C for 30 min, the resistivities of the Cu–0.7 at%Mg alloy and Cu–2.2 at%Ru alloy were 2.0 μΩ cm and 2.5 μΩ cm, respectively, which are comparable to that of Cu films. The adhesion was investigated by means of a sandwiched structure using the four point bending test. The interfacial debonding energy, which represents the adhesion, of Cu–Mg/SiO2 was over 5.0 J/m2, while those of the Cu–Ru/SiO2 and Cu/SiO2 interfaces were 2.2 J/m2 and 2.4 J/m2, respectively. The barrier characteristics of the alloy films were also investigated by the time-dependent dielectric breakdown test, using a metal–oxide–semiconductor structure, under bias-temperature stress. It was shown that the alloying of Mg made the lifetime seven times longer, as opposed to the alloying of Ru which made it shorter.

[1]  Wei Wang,et al.  Alloying of copper for use in microelectronic metallization , 1995 .

[2]  M. Shatzkes,et al.  Electrical-Resistivity Model for Polycrystalline Films: the Case of Arbitrary Reflection at External Surfaces , 1970 .

[3]  Shyam P. Murarka,et al.  Multilevel interconnections for ULSI and GSI era , 1997 .

[4]  Tadahiro Ohmi,et al.  Excellent electro/stress-migration-resistance surface-silicide passivated giant-grain Cu-Mg alloy interconnect technology for giga scale integration (GSI) , 1995, Proceedings of International Electron Devices Meeting.

[5]  Junichi Koike,et al.  Self-forming diffusion barrier layer in Cu–Mn alloy metallization , 2005 .

[6]  D. Gaskell.  Introduction to the Thermodynamics of Materials , 2017 .

[7]  Shyam P. Murarka,et al.  Capacitance–voltage, current–voltage, and thermal stability of copper alloyed with aluminium or magnesium , 1998 .

[8]  Lawrence H. Bennett,et al.  Binary alloy phase diagrams , 1986 .

[9]  Young-Chang Joo,et al.  The electric field dependence of Cu migration induced dielectric failure in interlayer dielectric for integrated circuits , 2007 .

[10]  Jaehyeong Kim,et al.  Diffusion barrier and electrical characteristics of a self-aligned MgO layer obtained from a Cu(Mg) alloy film , 2000 .

[11]  Farhad Moghadam,et al.  Quantitative Measurement of Interface Fracture Energy in Multi-Layer Thin Film Structures , 1995 .

[12]  Young-Chang Joo,et al.  Effect of Cu Migration in a Field Induced Dielectric Failure , 2006 .

[13]  Young-Bae Park,et al.  Electrical reliability and interfacial adhesion of Cu(Mg) thin films for interconnect process adaptability , 2008 .

[14]  Wei Wang,et al.  Low-temperature passivation of copper by doping with Al or Mg , 1995 .

[15]  Michael Lane,et al.  Relationship between interfacial adhesion and electromigration in Cu metallization , 2003 .

[16]  Michael Lane,et al.  Adhesion and debonding of multi-layer thin film structures , 1998 .