Sensing and Data Acquisition

[1]  Gaëtan Kerschen,et al.  Sensor validation using principal component analysis , 2005 .

[2]  Paul D. Wilcox,et al.  Strategies for guided-wave structural health monitoring , 2007, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[3]  Charles R. Farrar,et al.  Dynamic characterization and damage detection in the I-40 bridge over the Rio Grande , 1994 .

[4]  James L. Blackshire,et al.  Characterization of Bonded Piezoelectric Sensor Performance and Durability in Simulated Aircraft Environments , 2006 .

[5]  Thomas Bewley,et al.  Excitation design for damage detection using iterative adjoint-based optimization—Part 1: Method development , 2009 .

[6]  Charles R. Farrar,et al.  Piezoelectric Active Sensor Self-Diagnostics Using Electrical Admittance Measurements , 2006 .

[7]  Charles R. Farrar,et al.  Sensor Self-diagnosis Using a Modified Impedance Model for Active Sensing-based Structural Health Monitoring , 2009 .

[8]  Ignacio M. Perez,et al.  Optical-fiber-based chemical sensors for detection of corrosion precursors and by-products , 1999, Other Conferences.

[9]  Jan Ming Ko,et al.  Simulation studies of damage location in Tsing Ma Bridge deck , 2000, Smart Structures.

[10]  Gyuhae Park,et al.  Hardware design of hierarchal active-sensing networks for structural health monitoring , 2006 .

[11]  Billie F. Spencer,et al.  Smart sensing technology: opportunities and challenges , 2004 .

[12]  Victor Giurgiutiu,et al.  Piezoelectric Wafer Embedded Active Sensors for Aging Aircraft Structural Health Monitoring , 2002 .

[13]  T. Bewley,et al.  Excitation design for damage detection using iterative adjoint-based optimization—Part 2: Experimental demonstration , 2009 .

[14]  Jerome Peter Lynch,et al.  An overview of wireless structural health monitoring for civil structures , 2007, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[15]  Michael D. Todd,et al.  A novel Bragg grating sensor interrogation system utilizing a scanning filter, a Mach-Zehnder interferometer and a 3×3 coupler , 2001 .

[16]  Chee Kiong Soh,et al.  Electromechanical Impedance Modeling for Adhesively Bonded Piezo-Transducers , 2004 .

[17]  Xinlin Qing,et al.  SMART Layer and SMART Suitcase for structural health monitoring applications , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[18]  Jerome P. Lynch,et al.  Design of Piezoresistive MEMS-Based Accelerometer for Integration with Wireless Sensing Unit for Structural Monitoring , 2003 .

[19]  J. C. Baboux,et al.  The influence of bonding defects on the electric impedance of a piezoelectric embedded element , 1996 .

[20]  Charles R. Farrar,et al.  Energy Harvesting for Structural Health Monitoring Sensor Networks , 2008 .

[21]  B. Culshaw,et al.  Acousto-ultrasonic sensing using fiber Bragg gratings , 2003 .

[22]  Jerome P. Lynch,et al.  Automated Modal Parameter Estimation by Parallel Processing within Wireless Monitoring Systems , 2008 .

[23]  Carlos E. S. Cesnik,et al.  Review of guided-wave structural health monitoring , 2007 .

[24]  Keith Worden,et al.  Optimal sensor placement for fault detection , 2001 .

[25]  Christian Klein,et al.  Pressure sensitive paint systems for pressure distribution measurements in wind tunnels and turbomachines , 2000 .

[26]  Keith Worden,et al.  Fail-safe sensor distributions for impact detection in composite materials , 2000 .

[27]  Daniel J. Inman,et al.  Sensor Validation for Smart Structures , 1999 .

[28]  Jerome P. Lynch,et al.  Validation of a wireless modular monitoring system for structures , 2002, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[29]  Hoon Sohn,et al.  Overview of Piezoelectric Impedance-Based Health Monitoring and Path Forward , 2003 .

[30]  Hoon Sohn,et al.  Structural Health Monitoring Using Modular Wireless Sensors , 2003 .

[31]  Charles R. Farrar,et al.  Performance assessment and validation of piezoelectric active-sensors in structural health monitoring , 2006 .

[32]  Charles R. Farrar,et al.  Coupling sensing hardware with data interrogation software for structural health monitoring , 2006 .

[33]  Gyuhae Park,et al.  Piezoelectric Active-Sensor Diagnostics and Validation Using Instantaneous Baseline Data , 2009, IEEE Sensors Journal.

[34]  Michael D. Todd,et al.  An experimental demonstration of tailored excitations for improved damage detection in the presence of operational variability , 2009 .

[35]  J. Sirohi,et al.  Fundamental Understanding of Piezoelectric Strain Sensors , 1999, Smart Structures.

[36]  Charles R. Farrar,et al.  Improving Excitations for Active Sensing in Structural Health Monitoring via Evolutionary Algorithms , 2007 .

[37]  Michael I. Friswell,et al.  Sensor validation for structural systems with multiplicative sensor faults , 2007 .

[38]  Charles R. Farrar,et al.  Wireless impedance device for electromechanical impedance sensing and low-frequency vibration data acquisition , 2009, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[39]  David W Allen,et al.  Software for Manipulating and Embedding Data Interrogation Algorithms Into Integrated Systems , 2004 .

[40]  Liyong Tong,et al.  Closed-loop based detection of debonding of piezoelectric actuator patches in controlled beams , 2003 .