Dry-dressing for ecological grinding

[1]  Dongzhou Jia,et al.  Experimental Evaluation of the Lubrication Performance of MoS2/CNT Nanofluid for Minimal Quantity Lubrication in Ni-based Alloy Grinding , 2015 .

[2]  Mohammadjafar Hadad,et al.  An experimental investigation of the effects of machining parameters on environmentally friendly grinding process , 2015 .

[3]  Dongzhou Jia,et al.  Experimental evaluation of MoS2 nanoparticles in jet MQL grinding with different types of vegetable oil as base oil , 2015 .

[4]  Dongzhou Jia,et al.  Experimental research on the energy ratio coefficient and specific grinding energy in nanoparticle jet MQL grinding , 2015 .

[5]  J. I. Marquínez,et al.  Reduction of oil and gas consumption in grinding technology using high pour-point lubricants , 2013 .

[6]  Zhixiong Zhou,et al.  Investigation of grinding characteristic using nanofluid minimum quantity lubrication , 2012 .

[7]  Zhang Xiaohong,et al.  An Expert System of Cubic Boron Nitride (CBN) Grinding Wheel Dressing in Cam Grinding , 2012 .

[8]  Taghi Tawakoli,et al.  Temperature and energy partition in minimum quantity lubrication-MQL grinding process , 2012 .

[9]  Taghi Tawakoli,et al.  Minimum quantity lubrication in grinding: effects of abrasive and coolant–lubricant types , 2011 .

[10]  Pil-Ho Lee,et al.  Experimental characterization of micro-grinding process using compressed chilly air , 2011 .

[11]  K. Wegener,et al.  Conditioning and monitoring of grinding wheels , 2011 .

[12]  T. Tawakoli,et al.  Dressing of Grinding Wheels , 2011 .

[13]  B. Izquierdo,et al.  Machining evaluation of a hybrid MQL-CO2 grinding technology , 2010 .

[14]  Taghi Tawakoli,et al.  Investigation on minimum quantity lubricant-MQL grinding of 100Cr6 hardened steel using different abrasive and coolant–lubricant types , 2010 .

[15]  Peter Krajnik,et al.  Transitioning to sustainable production – part II: evaluation of sustainable machining technologies , 2010 .

[16]  Fritz Klocke,et al.  Temperatures and wear mechanisms in dressing of vitrified bonded grinding wheels , 2010 .

[17]  Peter Krajnik,et al.  Transitioning to sustainable production – Part I: application on machining technologies , 2010 .

[18]  A. Kubo,et al.  Estimation of Grinding Wheel Performance by Dressing Force Measurement , 2009 .

[19]  Fukuo Hashimoto,et al.  Industrial challenges in grinding , 2009 .

[20]  Fritz Klocke,et al.  Mechanisms in the generation of grinding wheel topography by dressing , 2008, Prod. Eng..

[21]  Jan C. Aurich,et al.  High-performance dry grinding using a grinding wheel with a defined grain pattern , 2008 .

[22]  W. B. Rowe,et al.  Optimisation of fluid application in grinding , 2008 .

[23]  Barbara Linke,et al.  Dressing process model for vitrified bonded grinding wheels , 2008 .

[24]  B. Shen,et al.  PERFORMANCE OF NOVEL MoS2 NANOPARTICLES BASED GRINDING FLUIDS IN MINIMUM QUANTITY LUBRICATION GRINDING , 2008 .

[25]  S. Malkin,et al.  Thermal Analysis of Grinding , 2007 .

[26]  W. Rowe,et al.  Handbook of Machining with Grinding Wheels , 2006 .

[27]  N. Fredj,et al.  Ground surface improvement of the austenitic stainless steel AISI 304 using cryogenic cooling , 2006 .

[28]  Berend Denkena,et al.  Dressing Monitoring by Acoustic Emission , 2005 .

[29]  Wilma Polini,et al.  Test protocol for micro-geometric wear of sintered diamond tools , 2004 .

[30]  Anselmo Eduardo Diniz,et al.  Correlating surface roughness and vibration on plunge cylindrical grinding of steel , 2003 .

[31]  W. Rowe,et al.  Precision grinding using CBN wheels , 2002 .

[32]  Anselmo Eduardo Diniz,et al.  Experimental evaluation on grinding wheel wear through vibration and acoustic emission , 1998 .

[33]  Xun Chen,et al.  Analysis and simulation of the grinding process. Part I: Generation of the grinding wheel surface , 1996 .

[34]  E. Brinksmeier,et al.  Characterization of Dressing Processes by Determination of the Collision Number of the Abrasive Grits , 1995 .

[35]  Stephen Malkin,et al.  Grinding Technology: Theory and Applications of Machining with Abrasives , 1989 .

[36]  K. Okamura,et al.  Monitoring of Dressing and Grinding Processes with Acoustic Emission Signals , 1985 .