Steam-air fluidized bed gasification of distillers grains: Effects of steam to biomass ratio, equivalence ratio and gasification temperature.

In this study, thermochemical biomass gasification was performed on a bench-scale fluidized-bed gasifier with steam and air as fluidizing and oxidizing agents. Distillers grains, a non-fermentable byproduct of ethanol production, were used as the biomass feedstock for the gasification. The goal was to investigate the effects of furnace temperature, steam to biomass ratio and equivalence ratio on gas composition, carbon conversion efficiency and energy conversion efficiency of the product gas. The experiments were conducted using a 3x3x3 full factorial design with temperatures of 650, 750 and 850 degrees C, steam to biomass ratios of 0, 7.30 and 14.29 and equivalence ratios of 0.07, 0.15 and 0.29. Gasification temperature was found to be the most influential factor. Increasing the temperature resulted in increases in hydrogen and methane contents, carbon conversion and energy efficiencies. Increasing equivalence ratio decreased the hydrogen content but increased carbon conversion and energy efficiencies. The steam to biomass ratio was optimal in the intermediate levels for maximal carbon conversion and energy efficiencies.

[1]  M. Hanna,et al.  Co-Production of Chemical and Energy Products from Distillers Grains using Supercritical Fluid Extraction and Thermochemical Conversion Technologies , 2007 .

[2]  A. Ghaly,et al.  Agglomeration of alumina sand in a fluidized bed straw gasifier at elevated temperatures , 1993 .

[3]  Zhenhong Yuan,et al.  Bio-syngas production from biomass catalytic gasification , 2007 .

[4]  J. F. González,et al.  Investigation on the reactions influencing biomass air and air/steam gasification for hydrogen production , 2008 .

[5]  S. Rapagnà.  Steam-gasification of biomass in a fluidised-bed of olivine particles. , 2000 .

[6]  James A. Duffield,et al.  THE ENERGY BALANCE OF CORN ETHANOL REVISITED , 2003 .

[7]  A. K. Gupta,et al.  Ultra-high temperature steam gasification of biomass and solid wastes. , 2007 .

[8]  Gasification of food waste with steam in fluidized bed , 2001, Korean Journal of Chemical Engineering.

[9]  Don W. Green,et al.  Perry's Chemical Engineers' Handbook , 2007 .

[10]  Peter McKendry,et al.  Energy production from biomass (Part 2): Conversion technologies. , 2002, Bioresource technology.

[11]  P. Lv,et al.  An experimental study on biomass air-steam gasification in a fluidized bed. , 2004, Bioresource technology.

[12]  L. T. Fan,et al.  Fluidized-bed steam gasification of rice hull , 1992 .

[13]  Gary J. Stiegel,et al.  Gasification technologies: the path to clean, affordable energy in the 21st century , 2001 .

[14]  Kunio Yoshikawa,et al.  Performance optimization of two-staged gasification system for woody biomass , 2007 .

[15]  D. E. Johnson,et al.  Analysis of Messy Data Volume I: Designed Experiments , 1985 .

[16]  Toshiaki Hanaoka,et al.  Effect of woody biomass components on air-steam gasification , 2005 .

[17]  S. Rapagnà,et al.  Steam gasification of almond shells in a fluidised bed reactor: the influence of temperature and particle size on product yield and distribution , 1997 .

[18]  C. M. Kinoshita,et al.  An experimental investigation of hydrogen production from biomass gasification , 1998 .

[19]  B. Kjellström,et al.  Evaluation of cyclone gasifier performance for gasification of sugar cane residue—Part 1: gasification of bagasse , 2001 .

[20]  Jie Chang,et al.  Biomass air-steam gasification in a fluidized bed to produce hydrogen-rich gas , 2003 .

[21]  Dallas E. Johnson,et al.  Analysis of messy data , 1992 .

[22]  A. Demirbas,et al.  Biomass resource facilities and biomass conversion processing for fuels and chemicals , 2001 .