The role of cross-slip in brittle fracture and fatigue

The relationship between slip character and resistance to cracking under unidirectional and cyclic loading conditions is discussed for single phase solids free of interstitial effects. Under unidirectional loading, increased difficulty of cross-slip intensifies strain within glide bands, induces planar glide, increases the dependence of the yield stress on grain size, and increases the probability of crack formation. In contrast, under cyclic loading, increased difficulty of cross-slip inhibits the slip processes required for crack initiation and growth at a given stress level. A semi-empirical means for predicting the rate of fatigue crack growth is presented.RésuméLes relations existant entre les propriétés de déformation par glissement et la réstance aux criques dans des conditions de contrainte unidirectionnelle ou cyclique sont étudiées dans le cas de solides monophasés exempts d' atomes strangers en insertion. Sous charges unidirectionnelles, la difficulte accrue de formation de cross-slips augmente la tension à l' intérieur des bandes de glissement, provoque un glissement plan, accentue la dépendance de la limite élastique sur la grosseur de grain et accroît la probabilité de formation de criques. Par contre, sous charges cycliques, cette même difficulté accrue de formation de crossslips empêche, à un niveau de contraintes donnees, le processus de glissement indispensable à la naissance et au développement de criques. 11 est proposé un moyen semi-empirique de prévoir le taux de croissance des criues de fatigue.ZusammenfassungFür einphasige Festkdrper, die frei von Zwischengittereffekten sind, wind die Beziehung zwischen Gleitcharakter and Widerstand gegenüber Ribbildung unter den Bedingungen von Belastung in einer Richtung and zyklischer Belastung diskutiert. Bei Belastung in einer Richtung verstrakt die stark erschwerte Quergleitung die Spannung innerhalb der Gleitbänder, verursacht Ebenen-Gleitung, erhöht die Abhängigkeit der Fliesspannung von der Korngrösse and die Wahrscheinlichkeit der Rissbildung. Bei zyklischer Belastung dagegen verzögert die strak erschwerte Quergleitung solche Gleitprozesse, die zu Bildung and Wachsturn von Rissen notwendig sind. Eine halbempirische Regel für die Vorhersage der Wachstumsgeschwindigkeit von Ermüdungrissen wird angegeben.

[1]  G. Smith,et al.  Crack propagation in high stress fatigue , 1962 .

[2]  R. G. Davies,et al.  Strain hardening of ordered F.C.C. alloys , 1964 .

[3]  T. L. Johnston,et al.  Crack propagation in a liquid metal environment , 1963 .

[4]  T. L. Johnston,et al.  Effect of Temperature on the Deformation of KCl‐KBr Alloys , 1963 .

[5]  A. Kelly,et al.  Independent slip systems in crystals , 1963 .

[6]  G. Smith,et al.  Initial stages of damage in high stress fatigue in some pure metals , 1963 .

[7]  T. L. Johnston,et al.  Slip character and the ductile to brittle transition of single-phase solids , 1965 .

[8]  P. C. Paris,et al.  A Critical Analysis of Crack Propagation Laws , 1963 .

[9]  N. Petch,et al.  The ductile-brittle transition in the fracture of α-iron: II , 1958 .

[10]  N. Brown,et al.  Temperature dependence of the yield points in iron , 1962 .

[11]  A. Cottrell,et al.  Dislocations and plastic flow in crystals , 1953 .

[12]  A. Mcevily,et al.  On fatigue crack propagation in F.C.C. metals , 1963 .

[13]  R. Armstrong,et al.  The plastic deformation of polycrystalline aggregates , 1962 .

[14]  S. Manson Fatigue: A complex subject—Some simple approximations , 1965 .

[15]  A. Mcevily,et al.  Fatigue slip band formation in silicon-iron , 1965 .

[16]  C. J. McMahon,et al.  Initiation of cleavage in polycrystalline iron , 1965 .

[17]  A. Lawley,et al.  Deformation structures in zone-melted molybdenum , 1964 .

[18]  J. Field Fracture of Solids , 1964 .

[19]  J. Morrow,et al.  Low Cycle Fatigue Evaluation of Inconel 713C and Waspaloy , 1965 .

[20]  A. Ferro,et al.  On the effect of the crystalline structure on the form of fatigue curves: The case of iron–nickel alloys , 1964 .

[21]  R. G. Davies,et al.  The plastic deformation of ordered FeCo and Fe3 Al alloys , 1964 .