Thin and dense Pd/CeO2/MPSS composite membrane for hydrogen separation and steam reforming of methane

Abstract A dense Pd/CeO2/MPSS composite membrane having a thin Pd layer of 13 μm deposited on a macro porous stainless steel (MPSS) tube was prepared using an improved electroless plating method with the commercial activating and plating solutions. The hydrogen permeation behavior of the as-prepared composite membrane under the H2/H2 gradient indicated that the hydrogen permeation process may be mainly controlled by the bulk diffusion through the Pd layer. The hydrogen permeability was almost equal to the theoretical value of the pure Pd membrane. In addition, the hydrogen permeation flux as high as 0.275 mol/(m2 s) was obtained at 823 K under the pressure difference of 200 kPa. However, the operating conditions such as hydrogen feed flux, sweep gas flux, hydrogen pressure, and temperature had a great effect on the permeation flux and resistance when it was operated under the H2/H2 + N2 (sweep gas) gradient. After permeation tests, the catalytic membrane reactor for steam reforming of methane was constructed, appearing a high methane conversion of 97% at 773 K. The membrane stability was proven by steady hydrogen permeation flux, complete hydrogen selectivity versus helium, and unchanged membrane surface morphology after long-term operation.

[1]  Y. Matsumura,et al.  Influence of palladium precursors on methanol synthesis from CO hydrogenation over Pd/CeO2 catalysts prepared by deposition–precipitation method , 2001 .

[2]  Shigeyuki Uemiya,et al.  Steam reforming of methane in a hydrogen-permeable membrane reactor , 1990 .

[3]  V. Violante,et al.  Experimental and simulation of both Pd and Pd/Ag for a water gas shift membrane reactor , 2001 .

[4]  Bernard P. A. Grandjean,et al.  Simultaneous deposition of Pd and Ag on porous stainless steel by electroless plating , 1993 .

[5]  K. Y. Foo,et al.  A New Preparation Technique for Pd/Alumina Membranes with Enhanced High-Temperature Stability , 1999 .

[6]  Bernard P. A. Grandjean,et al.  Methane steam reforming in asymmetric Pd- and Pd-Ag/porous SS membrane reactors , 1994 .

[7]  A. Varma,et al.  Pd-composite membranes prepared by electroless plating and osmosis: synthesis, characterization and properties , 2001 .

[8]  Yi Hua Ma,et al.  Defect‐free palladium membranes on porous stainless‐steel support , 1998 .

[9]  B. Steele,et al.  Materials for fuel-cell technologies , 2001, Nature.

[10]  R. Ramachandran,et al.  An overview of industrial uses of hydrogen , 1998 .

[11]  U. Balachandran,et al.  Characterization of ceramic hydrogen separation membranes with varying nickel concentrations , 2000 .

[12]  N. Itoh,et al.  Radial mixing diffusion of hydrogen in a packed-bed type of palladium membrane reactor , 1994 .

[13]  G. Lu,et al.  Preparation and characterization of Pd–Ag/ceramic composite membrane and application to enhancement of catalytic dehydrogenation of isobutane , 2003 .

[14]  Roland Dittmeyer,et al.  Membrane reactors for hydrogenation and dehydrogenation processes based on supported palladium , 2001 .

[15]  A. Züttel,et al.  Hydrogen-storage materials for mobile applications , 2001, Nature.

[16]  Weiqiang Liang,et al.  Repair of a Pd/α-Al2O3 composite membrane containing defects , 1999 .

[17]  Shigeyuki Uemiya,et al.  Separation of hydrogen through palladium thin film supported on a porous glass tube , 1991 .

[18]  Y. Matsumura,et al.  Methanol decomposition over palladium supported mesoporous CeO2–ZrO2 mixed oxides , 2001 .

[19]  A. Seidel-Morgenstern,et al.  Development of a H2-selective SiO2-membrane for the catalytic dehydrogenation of propane , 2001 .

[20]  R. Hughes,et al.  Characterisation and permeation of palladium/stainless steel composite membranes , 1998 .

[21]  V. Rouessac,et al.  Preparation of silica membranes inside macroporous alumina tubes by PECVD for hydrogen selectivity , 2003 .

[22]  Arvind Varma,et al.  Metal composite membranes: Synthesis, characterization and reaction studies , 1996 .

[23]  Timothy L. Ward,et al.  Model of hydrogen permeation behavior in palladium membranes , 1999 .

[24]  H. Brunner,et al.  Thin dense Pd membranes supported on α-Al2O3 hollow fibers , 2001 .

[25]  Thin Pd membrane prepared on macroporous stainless steel tube filter by an in-situ multi-dimensional plating mechanism. , 2004, Chemical communications.

[26]  Huey-Ing Chen,et al.  Preparation of hydrogen-permselective palladium-silver alloy composite membranes by electroless co-deposition , 2003 .

[27]  Y. Matsumura,et al.  Interaction between palladium and the support in Pd/CeO2 prepared by deposition–precipitation method and the catalytic activity for methanol decomposition , 2000 .

[28]  Naceur Jemaa,et al.  Thin Palladium Film Formation on Shot Peening Modified Porous Stainless Steel Substrates , 1996 .

[29]  Kaoru Onuki,et al.  Separation of hydrogen from a H2 H2 OHI gaseous mixture using a silica membrane , 2000 .

[30]  Fernando Roa,et al.  Influence of Alloy Composition and Membrane Fabrication on the Pressure Dependence of the Hydrogen Flux of Palladium−Copper Membranes , 2003 .

[31]  Y. S. Lin.  Microporous and dense inorganic membranes: Current status and prospective , 2000 .

[32]  S. Ihm,et al.  Study on the variation of morphology and separation behavior of the stainless steel supported membranes at high temperature , 2003 .

[33]  Huey-Ing Chen,et al.  Synthesis and characterization of palladium clusters dispersed alumina membranes , 2003 .

[34]  H. Brunner,et al.  Pd/ceramic hollow fibers for H2 separation , 2003 .

[35]  Fausto Gallucci,et al.  A simulation study of the steam reforming of methane in a dense tubular membrane reactor , 2004 .

[36]  Weiqiang Liang,et al.  The effect of carbon monoxide and steam on the hydrogen permeability of a Pd/stainless steel membrane , 2000 .

[37]  Robert E. Buxbaum,et al.  Hydrogen transport through tubular membranes of palladium-coated tantalum and niobium , 1996 .