A numerical investigation of injection pressure effects on wall-impinging ignition at low-temperatures for heavy-duty diesel engine

[1]  Hao Chen,et al.  Effects of injection timing and rail pressure on combustion characteristics and cyclic variations of a common rail DI engine fuelled with F-T diesel synthesized from coal , 2020 .

[2]  C. Lee,et al.  Effect of injection pressure on the impinging spray and ignition characteristics of the heavy-duty diesel engine under low-temperature conditions , 2020 .

[3]  Fushui Liu,et al.  Numerical study on critical ambient temperature for auto-ignition of the diesel spray under cold-start conditions , 2019 .

[4]  C. Lee,et al.  The experimental investigation on the impact of toluene addition on low-temperature ignition characteristics of diesel spray , 2019, Fuel.

[5]  Fushui Liu,et al.  Experimental study on the combustion characteristics of impinging diesel spray at low temperature environment , 2019, Applied Thermal Engineering.

[6]  P. Glarborg,et al.  Effects of ambient pressure on ignition and flame characteristics in diesel spray combustion , 2019 .

[7]  C. Lee,et al.  EFFECT OF NOZZLE DIAMETER ON MACROSCOPIC SPRAY BEHAVIOR OF HEAVY-DUTY DIESEL ENGINE UNDER COLD-START CONDITIONS , 2019, Atomization and sprays.

[8]  Haifeng Liu,et al.  Spray and flame characteristics of wall-impinging diesel fuel spray at different wall temperatures and ambient pressures in a constant volume combustion vessel , 2019, Fuel.

[9]  Zhengwu Zhang,et al.  Effects of injection pressure on ignition and combustion characteristics of impinging diesel spray , 2018, Applied Energy.

[10]  Jacqueline H. Chen,et al.  Direct numerical simulation of a temporally evolving air/n-dodecane jet at low-temperature diesel-relevant conditions , 2018, Combustion and Flame.

[11]  Wei Du,et al.  Effects of injection pressure on spray structure after wall impingement , 2018 .

[12]  Tianfeng Lu,et al.  A compact skeletal mechanism for n-dodecane with optimized semi-global low-temperature chemistry for diesel engine simulations , 2017 .

[13]  Gequn Shu,et al.  Experimental investigation on wall film ratio of diesel, butanol/diesel, DME/diesel and gasoline/diesel blended fuels during the spray wall impingement process , 2017 .

[14]  F. Battin‐Leclerc,et al.  An updated experimental and kinetic modeling study of n-heptane oxidation , 2016 .

[15]  K. Nishida,et al.  Effect of flat-wall impingement on diesel spray combustion , 2015 .

[16]  Tianfeng Lu,et al.  A Multicomponent Blend as a Diesel Fuel Surrogate for Compression Ignition Engine Applications , 2014 .

[17]  R. Brooks,et al.  Internal combustion engine cold-start efficiency: A review of the problem, causes and potential solutions , 2014 .

[18]  Tianfeng Lu,et al.  Development and validation of an n-dodecane skeletal mechanism for spray combustion applications , 2014 .

[19]  M. Arai,et al.  CHARACTERISTICS OF ADHESION DIESEL FUEL ON AN IMPINGEMENT DISK WALL PART 2: DROPLET WEBER NUMBER AND ADHERED FUEL MASS , 2014 .

[20]  T. Ishima,et al.  Measurement of Fuel Liquid Film under the Different Injection Pressure , 2013 .

[21]  M. Arai,et al.  EXPERIMENTAL INVESTIGATIONS ON ADHERED FUEL AND IMPINGING DIESEL SPRAY NORMAL TO A WALL , 2013 .

[22]  S. M. Sarathy,et al.  Comprehensive chemical kinetic modeling of the oxidation of 2-methylalkanes from C7 to C20 , 2011 .

[23]  Olawole Abiola Kuti,et al.  Effects of ultra-high injection pressure and micro-hole nozzle on flame structure and soot formation of impinging diesel spray , 2011 .

[24]  C. Westbrook,et al.  Kinetic modeling of gasoline surrogate components and mixtures under engine conditions , 2011 .

[25]  Michael Boot,et al.  Spray Impingement in the Early Direct Injection Premixed Charge Compression Ignition Regime , 2010 .

[26]  K. Nishida,et al.  An experimental study on flat-wall-impinging spray of microhole nozzles under ultra-high injection pressures , 2008 .

[27]  Tianfeng Lu,et al.  Strategies for mechanism reduction for large hydrocarbons: n-heptane , 2008 .

[28]  L. Allocca,et al.  Experimental and numerical analysis of high pressure diesel spray–wall interaction , 2007 .

[29]  Sung Wook Park,et al.  Macroscopic and microscopic characteristics of a fuel spray impinged on the wall , 2004 .

[30]  Heinz Pitsch,et al.  Effects of strain rate on high-pressure nonpremixed n-heptane autoignition in counterflow , 2004 .

[31]  P. Senecal,et al.  Multi-Dimensional Modeling of Direct-Injection Diesel Spray Liquid Length and Flame Lift-off Length using CFD and Parallel Detailed Chemistry , 2003 .

[32]  Bogdan Nitu,et al.  Diesel Engine Cold Start Combustion Instability and Control Strategy , 2001 .

[33]  K. Kihm,et al.  Spray-tip droplet SMDs of intermittent high-pressure sprays of diesel fuel compared with coal-water slurry sprays , 1995 .

[34]  Naeim A. Henein,et al.  Diesel engine cold starting: Combustion instability , 1992 .