Diffraction Contrast Tomography in the Laboratory – Applications and Future Directions

LabDCT derives 3D crystallographic information via diffraction contrast tomography (DCT) within a commercial laboratory X-ray microscope (ZEISS Xradia 520 Versa) that uses a synchrotron-style detection system for tomography. The establishment of DCT into a laboratory setting opens the way for routine, non-destructive, time-evolution studies of grain structure over meaningful sample volumes. The combination of grain information with microstructural features such as cracks, porosity, and inclusions, all derived non-destructively in 3D, enables materials characterization of damage, deformation, and growth mechanisms. Here, we introduce LabDCT and demonstrate its capabilities through a selection of materials science

[1]  A. Cocks,et al.  Constitutive modelling of powder compaction and sintering , 2001 .

[2]  E. Lauridsen,et al.  Direct observation of 3-D grain growth in Al-0.1% Mn , 2008 .

[3]  P. Withers,et al.  Non-destructive mapping of grain orientations in 3D by laboratory X-ray microscopy , 2015, Scientific Reports.

[4]  Jeff Gelb,et al.  The Ascent of 3D X-ray Microscopy in the Laboratory , 2013, Microscopy Today.

[5]  Henning Friis Poulsen,et al.  On the Use of Laguerre Tessellations for Representations of 3D Grain Structures , 2011 .

[6]  C. Hombourger,et al.  Quantitative Analysis and High-Resolution X-ray Mapping with a Field Emission Electron Microprobe , 2013, Microscopy Today.

[7]  Dejan Stojakovic,et al.  Electron backscatter diffraction in materials characterization , 2012 .

[8]  Henning Friis Poulsen,et al.  Tracking: a method for structural characterization of grains in powders or polycrystals , 2001 .

[9]  G. Spanos,et al.  Three-dimensional analysis of grain topology and interface curvature in a β-titanium alloy , 2010 .

[10]  W. J. Palenstijn,et al.  Advances in X-ray diffraction contrast tomography: Flexibility in the setup geometry and application to multiphase materials , 2013 .

[11]  D. Field,et al.  Electron backscatter diffraction and orientation imaging microscopy , 1997 .

[12]  J. Buffière,et al.  Characterization of polycrystalline materials using synchrotron X-ray imaging and diffraction techniques , 2010 .

[13]  W. Ludwig,et al.  Observations of Intergranular Stress Corrosion Cracking in a Grain-Mapped Polycrystal , 2008, Science.

[14]  Henning Friis Poulsen,et al.  Three-Dimensional X-Ray Diffraction Microscopy , 2004 .

[15]  H. Exner,et al.  Particle Rearrangement and Pore Space Coarsening During Solid‐State Sintering , 2009 .

[16]  B. Ralph.  Three-dimensional X-ray diffraction microscopy (mapping polycrystals and their dynamics) , 2005 .

[17]  Michael Herbig,et al.  3-D growth of a short fatigue crack within a polycrystalline microstructure studied using combined diffraction and phase-contrast X-ray tomography , 2011 .

[18]  W. Ludwig,et al.  Three-dimensional in situ observations of short fatigue crack growth in magnesium , 2011 .

[19]  J. Banhart,et al.  Cooperative material transport during the early stage of sintering. , 2011, Nature communications.

[20]  C. J. Harland,et al.  Electron back-scattering patterns—A new technique for obtaining crystallographic information in the scanning electron microscope , 1973 .