Effect of fly ash on the kinetics of Portland cement hydration at different curing temperatures
暂无分享,去创建一个
[1] P. Brown,et al. The effect of inorganic salts on tricalcium silicate hydration , 1986 .
[2] J. G. Cabrera,et al. Mechanism and kinetics of hydration of C3A and C4AF. Extracted from cement , 1984 .
[3] Anton K. Schindler,et al. Effect of Temperature on Hydration of Cementitious Materials , 2004 .
[4] John Bensted,et al. Hydration of Portland Cement , 1983 .
[5] Takafumi Noguchi,et al. Modeling of hydration reactions using neural networks to predict the average properties of cement paste , 2005 .
[6] T. Nawa,et al. INFLUENCE OF RELATIVE HUMIDITY ON COMPRESSIVE STRENGTH OF FLY ASH CEMENT PASTE , 2008 .
[7] J. Bullard,et al. Mechanisms of cement hydration , 2011 .
[8] M. Ward,et al. Effect of silica fume and fly ash on heat of hydration of Portland cement , 2002 .
[9] K. Folliard,et al. Heat of Hydration Models for Cementitious Materials , 2005 .
[10] Jie Zhang,et al. Early hydration and setting of oil well cement , 2010 .
[11] T. Noguchi,et al. Numerical Modeling of Portland Cement Hydration Based on Particle Kinetic Model and Multi-component Concept , 2007 .
[12] Wei Sun,et al. Fly ash effects. II. The active effect of fly ash , 2004 .
[13] W. Nocuń-Wczelik,et al. Heat Evolution in Hydrated Cementitious Systems Admixtured with Fly Ash , 2001 .
[14] H. Uchikawa,et al. The mechanism of the hydration in the system C3S-pozzolana , 1980 .
[15] John H. Sharp,et al. Effect of temperature on the hydration of the main clinker phases in portland cements: part ii, blended cements , 1998 .
[16] Della M. Roy,et al. THE RETARDING EFFECTS OF FLY ASH UPON THE HYDRATION OF CEMENT PASTES: THE FIRST 24 HOURS , 1985 .
[17] K. Yamada,et al. Effect of Curing Temperature and Water to Cement Ratio on Hydration of Cement Compounds , 2007 .
[18] Han-seung Lee,et al. Simulation of a temperature rise in concrete incorporating fly ash or slag , 2010 .
[19] Hamlin M. Jennings,et al. Refinements to colloid model of C-S-H in cement: CM-II , 2008 .
[20] R. Talero,et al. Influence of two different fly ashes on the hydration of portland cements , 2004 .
[21] Toyoharu Nawa,et al. Effect of fly ash on autogenous shrinkage , 2005 .
[22] J. Sharp,et al. The microstructure and mechanical properties of blended cements hydrated at various temperatures , 2001 .
[23] Miguel Cervera,et al. THERMO-CHEMO-MECHANICAL MODEL FOR CONCRETE. I: HYDRATION AND AGING , 1999 .
[24] K. Scrivener,et al. Studying nucleation and growth kinetics of alite hydration using μic , 2009 .
[25] J. F. Young,et al. The hydration of tricalcium silicate in the presence of colloidal silica , 1984 .
[26] Francisca Puertas,et al. Polycarboxylate superplasticiser admixtures: effect on hydration, microstructure and rheological behaviour in cement pastes , 2005 .
[27] Robert Schennach,et al. A review of cement–superplasticizer interactions and their models , 2000 .
[28] I. Odler,et al. Combined hydration of tricalcium silicate and β-dicalcium silicate , 1982 .
[29] Hamlin M. Jennings,et al. Thermodynamics of Calcium Silicate Hydrates and Their Solutions , 1987 .
[30] C-S-Hの組成と物理的性質に関する基礎的研究 , 2010 .
[31] Han-Seung Lee,et al. A model for predicting the carbonation depth of concrete containing low-calcium fly ash , 2009 .
[32] In-Seok Yoon,et al. Prediction of Temperature Distribution in High-Strength Concrete Using Hydration Model , 2008 .
[33] Erick Ringot,et al. Mineral admixtures in mortars Effect of inert materials on short-term hydration , 2003 .
[34] O. Cabrera,et al. Calorimetry of portland cement with silica fume and gypsum additions , 2007 .
[35] K. Van Breugel,et al. Simulation of hydration and formation of structure in hardening cement-based materials , 1991 .
[36] Rachel J. Detwiler,et al. DEVELOPMENT OF MICROSTRUCTURES IN PLAIN CEMENT PASTES HYDRATED AT DIFFERENT TEMPERATURES , 1991 .
[37] T. Ishida,et al. HYDRATE COMPOSITION ANALYSIS AND MICRO STRUCTURE CHARACTERISTICS OF PORTLAND CEMENT-BLAST FURNACE SLAG SYSTEM , 2010 .
[38] H. Jennings,et al. A model for two types of calcium silicate hydrate in the microstructure of Portland cement pastes , 2000 .
[39] T. Nawa,et al. Effect of water curing conditions on the hydration degree and compressive strengths of fly ash–cement paste , 2006 .
[40] P. Brown,et al. Calorimetric Study of Cement Blends Containing Fly Ash, Silica Fume, and Slag at Elevated Temperatures , 1994 .
[41] J. Duchesne,et al. Effect of supplementary cementing materials on the composition of cement hydration products , 1995 .
[42] C. Poon,et al. Degree of hydration and gel/space ratio of high-volume fly ash/cement systems , 2000 .
[43] Miguel A. G. Aranda,et al. Accuracy in Rietveld quantitative phase analysis of Portland cements , 2003 .
[44] M. Daimon,et al. Hydration of fly ash cement , 2005 .
[45] John H. Sharp,et al. The chemical composition and microstructure of hydration products in blended cements , 2004 .
[46] J. Marchand,et al. INFLUENCE OF CURING TEMPERATURE ON CEMENT HYDRATION AND MECHANICAL STRENGTH DEVELOPMENT OF FLY ASH MORTARS , 1997 .
[47] Han-Seung Lee,et al. Modeling the hydration of concrete incorporating fly ash or slag , 2010 .
[48] Han-seung Lee,et al. Simulation of Low-Calcium Fly Ash Blended Cement Hydration , 2009 .
[49] K. Scrivener,et al. Microstructural development of early age hydration shells around cement grains , 2010 .
[50] K. Herwig,et al. Quasielastic Neutron Scattering Study of the Effect of Water-to-Cement Ratio on the Hydration Kinetics of Tricalcium Silicate , 1998 .
[51] Jeffrey W. Bullard,et al. New Insights Into the Effect of Calcium Hydroxide Precipitation on the Kinetics of Tricalcium Silicate Hydration , 2010 .
[52] R. Livingston. Fractal nucleation and growth model for the hydration of tricalcium silicate , 2000 .
[53] A. Nonat,et al. Hydrated Layer Formation on Tricalcium and Dicalcium Silicate Surfaces: Experimental Study and Numerical Simulations , 2001 .