Research on water discharge characteristics of PEM fuel cells by using neutron imaging technology at the NRF, HANARO.

An investigation into the water discharge characteristics of proton exchange membrane (PEM) fuel cells is carried out by using a feasibility test apparatus and the Neutron Radiography Facility (NRF) at HANARO. The feasibility test apparatus was composed of a distilled water supply line, a compressed air supply line, heating systems, and single PEM fuel cells, which were a 1-parallel serpentine type with a 100 cm(2) active area. Three kinds of methods were used: compressed air supply-only; heating-only; and a combination of the methods of a compressed air supply and heating, respectively. The resultant water discharge characteristics are different according to the applied methods. The compressed air supply only is suitable for removing the water at a flow field and a heating only is suitable for water at the MEA. Therefore, in order to remove all the water at PEM fuel cells, the combination method is needed at the moment.

[1]  Ralph E. White,et al.  A water and heat management model for proton-exchange-membrane fuel cells , 1993 .

[2]  Daniel S. Hussey,et al.  PEM fuel cell membrane hydration measurement by neutron imaging , 2006 .

[3]  James F. McElroy,et al.  Hydrogen-oxygen proton-exchange membrane fuel cells and electrolyzers , 1990 .

[4]  Mahlon Wilson,et al.  A printed circuit board approach to measuring current distribution in a fuel cell , 1998 .

[5]  Alan K. Thompson,et al.  Neutron Imaging Technique for In Situ Measurement of Water Transport Gradients within Nafion in Polymer Electrolyte Fuel Cells , 1999 .

[6]  G. Lindbergh,et al.  In Situ Micro-Raman on the Membrane in a Working PEM Cell , 2006 .

[7]  D. Wilkinson,et al.  In-situ methods for the determination of current distributions in PEM fuel cells , 1998 .

[8]  P. Millet Water electrolysis using EME technology: temperature profile inside a nafion membrane during electrolysis , 1991 .

[9]  David L. Jacobson,et al.  In situ neutron imaging technique for evaluation of water management systems in operating PEM fuel cells , 2004 .

[10]  P. Lund,et al.  Measurement of current distribution in a free-breathing PEMFC , 2002 .

[11]  M. Heitor,et al.  Design of dedicated instrumentation for temperature distribution measurements in solid oxide fuel cells , 1997 .

[12]  Norman Munroe,et al.  Review and comparison of approaches to proton exchange membrane fuel cell modeling , 2005 .

[13]  Won-Yong Lee,et al.  Current distribution in a single cell of PEMFC , 2003 .

[14]  Kirk W Feindel,et al.  In situ observations of water production and distribution in an operating H2/O2 PEM fuel cell assembly using 1H NMR microscopy. , 2004, Journal of the American Chemical Society.

[15]  Christopher Hebling,et al.  Characterising PEM Fuel Cell Performance Using a Current Distribution Measurement in Comparison with a CFD Model , 2004 .

[16]  Christopher Hebling,et al.  A PEM fuel cell for combined measurement of current and temperature distribution, and flow field flooding , 2004 .

[17]  Chao-Yang Wang,et al.  In situ water distribution measurements in a polymer electrolyte fuel cell , 2003 .

[18]  James Larminie,et al.  Fuel Cell Systems Explained , 2000 .

[19]  T. Zawodzinski,et al.  Further refinements in the segmented cell approach to diagnosing performance in polymer electrolyte fuel cells , 2003 .

[20]  Alexander Wokaun,et al.  An on-line study of fuel cell behavior by thermal neutrons , 2005 .

[21]  M. Mench,et al.  Real-time water distribution in a polymer electrolyte fuel cell , 2005 .

[22]  M. Verbrugge,et al.  Mathematical model of a gas diffusion electrode bonded to a polymer electrolyte , 1991 .

[23]  Natarajan Rajalakshmi,et al.  Evaluation of current distribution in a proton exchange membrane fuel cell by segmented cell approach , 2002 .

[24]  D. Stolten,et al.  Magnetotomography—a new method for analysing fuel cell performance and quality , 2005 .

[25]  Tyler W. Davis,et al.  IN SITU TEMPERATURE DISTRIBUTION MEASUREMENT IN AN OPERATING POLYMER ELECTROLYTE FUEL CELL , 2003 .

[26]  Jack S. Brenizer,et al.  Study of water distribution and transport in a polymer electrolyte fuel cell using neutron imaging , 2005 .

[27]  Chao-Yang Wang,et al.  In Situ Current Distribution Measurements in Polymer Electrolyte Fuel Cells , 2003 .

[28]  C. Wieser,et al.  A new technique for two-dimensional current distribution measurements in electrochemical cells , 2000 .

[29]  Daniel S. Hussey,et al.  New neutron imaging facility at the NIST , 2005 .

[30]  G. Eisman,et al.  The application of Dow Chemical's perfluorinated membranes in proton-exchange membrane fuel cells , 1990 .

[31]  Matti Noponen,et al.  Current distribution measurements in a PEFC with net flow geometry , 2004 .