A New Flux-Concentrating Rotor of Double Stator and Single Rotor Axial Flux Permanent Magnet Motor for Electric Vehicle Traction Application

In this paper, a new flux-concentrating rotor with interior permanent magnet (IPM) of double stator and single rotor (DSSR) axial flux permanent magnet (AFPM) motor is proposed for electric vehicle traction application. Compared with the traditional surface-mounted PM rotor and spoke-type IPM rotor, the saliency effect of the proposed IPM rotor can be significantly increased to improve torque performance, as well as reduce rotor losses and increase efficiency. First, the topological structure flux-concentrating principle of the rotor with inserted PMs are introduced and analyzed. The direct-axis or quadrature-axis magnetic path are dissected in depth to explain the contribution rate of reluctance torque. Then, the design and optimization of AFPM motors with traditional surface-mounted rotor, spoke-type IPM rotor and the proposed rotor are carried out to pursue torque density. Finally, the electromagnetic performances of three AFPM motors are compared by finite element analysis (FEA). The results of comparative analysis show that the proposed rotor has some obvious advantages including motor overload capacity, power/torque density and maximum efficiency.

[1]  Qiang Li,et al.  Electromagnetic Analysis and Efficiency Improvement of Axial-Flux Permanent Magnet Motor With Yokeless Stator by Using Grain-Oriented Silicon Steel , 2022, IEEE Transactions on Magnetics.

[2]  Qiang Li,et al.  3-D Equivalent Magnetic Network Modeling and FEA Verification of a Novel Axial-Flux Hybrid-Excitation In-wheel Motor , 2021, IEEE Transactions on Magnetics.

[3]  Qiang Li,et al.  High Torque Density Fractional-Slot Concentrated-Winding Axial-Flux Permanent-Magnet Machine with Modular SMC Stator , 2019, 2019 IEEE Energy Conversion Congress and Exposition (ECCE).

[4]  Caiyong Ye,et al.  Research of an Axial Flux Stator Partition Hybrid Excitation Brushless Synchronous Generator , 2018, IEEE Transactions on Magnetics.

[5]  Jang-Young Choi,et al.  Comparison of Axial Flux Permanent Magnet Synchronous Machines With Electrical Steel Core and Soft Magnetic Composite Core , 2017, IEEE Transactions on Magnetics.

[6]  Qurban Ali Shah Syed,et al.  Analysis of flux focusing double stator and single rotor axial flux permanent magnet motor , 2016, 2016 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES).

[7]  Martin Doppelbauer,et al.  Development of a Yokeless and Segmented Armature Axial Flux Machine , 2016, IEEE Transactions on Industrial Electronics.

[8]  Bulent Sarlioglu,et al.  Closed-Form Solution for Axial Flux Permanent-Magnet Machines With a Traction Application Study , 2016, IEEE Transactions on Industry Applications.

[9]  T. Lipo,et al.  A Novel Dual-Stator Axial-Flux Spoke-Type Permanent Magnet Vernier Machine for Direct-Drive Applications , 2014, IEEE Transactions on Magnetics.

[10]  Metin Aydin,et al.  Comparing Various PM Synchronous Generators: A Feasible Solution for High-Power, Off-Highway, Series Hybrid, Electric Traction Applications , 2014, IEEE Vehicular Technology Magazine.

[11]  F. Caricchi,et al.  Recent Advances in Axial-Flux Permanent-Magnet Machine Technology , 2012, IEEE Transactions on Industry Applications.

[12]  F. Caricchi,et al.  Fractional-slot concentrated-winding axial-flux permanent-magnet machine with tooth-wound coils , 2012, 2012 XXth International Conference on Electrical Machines.

[13]  Satoshi Ogasawara,et al.  A ferrite permanent magnet axial gap motor with segmented rotor structure for the next generation hybrid vehicle , 2010, The XIX International Conference on Electrical Machines - ICEM 2010.

[14]  Seung-Ki Sul,et al.  Design and Control of an Axial-Flux Machine for a Wide Flux-Weakening Operation Region , 2007, IEEE Transactions on Industry Applications.

[15]  Ibrahim Dincer,et al.  Economic and environmental comparison of conventional, hybrid, electric and hydrogen fuel cell vehicles , 2006 .

[16]  Ezio Santini,et al.  Multi-stage axial-flux PM machine for wheel direct drive , 1995, IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting.

[17]  Yu Wang,et al.  Comparative Study of Yokeless Stator Axial-Flux PM Machines Having Fractional Slot Concentrated and Integral Slot Distributed Windings for Electric Vehicle Traction Applications , 2022, IEEE Transactions on Industrial Electronics.

[18]  Jian Li,et al.  Electromagnetic Force and Vibration Study on Axial Flux Permanent Magnet Synchronous Machines With Dual Three-Phase Windings , 2020, IEEE Transactions on Industrial Electronics.

[19]  S.Q.A. Shah,et al.  Comparative analysis of surface mounted and flux focusing type axial flux permanent magnet motor , 2016 .