On-Line Monitoring of Blind Fastener Installation Process

Blind fasteners are of special interest for aircraft construction since they allow working on joints where only one side is accessible, as is the case in many common aerospace box-type structures, such as stabilizers and flaps. This paper aims to deliver an online monitoring method for the detection of incorrect installed blind fasteners. In this type of fastener, the back side of the assembly is not accessible, so monitoring the process installation is suitable as a system to assess the formed head at the back side with no access. The solution proposed consists of an on-line monitoring system that is based on sensor signals acquired during the installation. The signals are conveniently analyzed in order to provide an evaluation outcome on how the fastener was installed. This new method will help production to decrease/eliminate time and cost-intensive inspections and fasteners over installation in structures. The decrease of the number of installed fasteners will also contribute to weight savings and will reduce the use of resources.

[1]  Basilio Sierra,et al.  Kernel Density-Based Pattern Classification in Blind Fasteners Installation , 2017, HAIS.

[2]  K. Tserpes,et al.  The effects of manufacturing-induced and in-service related bonding quality reduction on the mode-I fracture toughness of composite bonded joints for aeronautical use , 2013 .

[3]  Srinivasa D. Thoppul,et al.  Mechanics of mechanically fastened joints in polymer–matrix composite structures – A review , 2009 .

[4]  Anil K. Jain.  Data clustering: 50 years beyond K-means , 2008, Pattern Recognit. Lett..

[5]  Asuncion Rivero,et al.  A non-destructive quality assessment for blind-fastener installations based on the combination of ultrasound techniques and real-time monitoring of the fastening process , 2015 .

[6]  Alberto Lavatelli,et al.  Model Based Bolt Preload Monitoring Using Digital Image Correlation , 2018 .

[7]  Paola Fantini,et al.  A new approach for machine's management: from machine's signal acquisition to energy indexes , 2016 .

[8]  Blair E. Carlson,et al.  Joining of dissimilar materials , 2015 .

[9]  Jaroslav Mackerle,et al.  Finite element analysis of fastening and joining: A bibliography (1990–2002) , 2003 .

[10]  Javier Del Ser,et al.  Data fusion and machine learning for industrial prognosis: Trends and perspectives towards Industry 4.0 , 2019, Inf. Fusion.

[11]  Minhhuy Le,et al.  B-scan ultrasonic testing of rivets in multilayer structures based on short-time Fourier transform analysis , 2018, Measurement.

[12]  Zhongqing Su,et al.  Continuous Monitoring of Residual Torque of Loose Bolt in a Bolted Joint , 2017 .

[13]  Sarangapani Jagannathan,et al.  Real-time detection of grip length during fastening of bolted joints: a Mahalanobis-Taguchi system (MTS) based approach , 2010, J. Intell. Manuf..

[14]  Jeong-Tae Kim,et al.  Preload Monitoring in Bolted Connection Using Piezoelectric-Based Smart Interface , 2018, Sensors.

[15]  F. C. Campbell.  Chapter 11 – Structural Assembly , 2006 .

[16]  F. C. Campbell.  Manufacturing technology for aerospace structural materials , 2006 .