Core Loss Analysis and Calculation of Stator Permanent-Magnet Machine Considering DC-Biased Magnetic Induction

In this paper, core loss characteristics of stator permanent-magnet (PM) machines are analyzed and calculated, in which the unique dc-biased magnetic induction is taken into account. The flux density variation patterns in some key points in a doubly salient PM (DSPM) machine are analyzed by the two-dimensional time-stepping finite-element method. To calculate the core loss of stator and other minor hysteresis loops under dc magnetic bias, core loss characteristics of silicon steel sheet under dc-biased induction condition are first tested by a simple test system based on traditional Epstein frame and a functional relationship between the change of dc-biased induction and hysteresis loss is proposed. Two core loss calculation methods considering rotational magnetization based on flux density waveform are improved to take the influence of dc-biased magnetic induction into consideration. The calculation results are verified by experiments on a prototype DSPM machine. The conclusions are also applicable to other kinds of stator PM machines.

[1]  Jianguo Zhu,et al.  Core Loss Modeling for Permanent-Magnet Motor Based on Flux Variation Locus and Finite-Element Method , 2012, IEEE Transactions on Magnetics.

[2]  Yu Gong,et al.  Analysis of Doubly Salient Memory Motors Using Preisach Theory , 2009, IEEE Transactions on Magnetics.

[3]  Wei Hua,et al.  Static Characteristics of Doubly-salient Brushless Machines Having Magnets in the Stator Considering End-effect , 2008 .

[4]  N. Sadowski,et al.  Evaluation of Hysteresis Losses in Iron Sheets Under DC-biased Inductions , 2009, IEEE Transactions on Magnetics.

[5]  Hongyun Jia,et al.  Torque Ripple Suppression in Flux-Switching PM Motor by Harmonic Current Injection Based on Voltage Space-Vector Modulation , 2010, IEEE Transactions on Magnetics.

[6]  Zhiguang Cheng,et al.  Measurements and Calculation of Core-Based $B-H$ Curve and Magnetizing Current in DC-Biased Transformers , 2010, IEEE Transactions on Applied Superconductivity.

[7]  Ming Cheng,et al.  Remedial Injected-Harmonic-Current Operation of Redundant Flux-Switching Permanent-Magnet Motor Drives , 2013, IEEE Transactions on Industrial Electronics.

[8]  Hongyun Jia,et al.  Back-EMF Harmonic Analysis and Fault-Tolerant Control of Flux-Switching Permanent-Magnet Machine With Redundancy , 2011, IEEE Transactions on Industrial Electronics.

[9]  Wei Hua,et al.  Overview of Stator-Permanent Magnet Brushless Machines , 2011, IEEE Transactions on Industrial Electronics.

[10]  Masato Enokizono,et al.  Measurement system of alternating magnetic properties under DC-biased field , 2000 .

[11]  Qiang Sun,et al.  New self-tuning fuzzy PI control of a novel doubly salient permanent-magnet motor drive , 2006, IEEE Transactions on Industrial Electronics.

[12]  F. Henrotte,et al.  Impact of cut edges on magnetization curves and iron losses in e-machines for automotive traction , 2010 .

[13]  N. Sadowski,et al.  Simplified models for magnetic hysteresis losses evaluation in electromagnetic devices , 2009, 2009 IEEE International Electric Machines and Drives Conference.

[14]  Wei Hua,et al.  Investigation and General Design Principle of a New Series of Complementary and Modular Linear FSPM Motors , 2013, IEEE Transactions on Industrial Electronics.

[15]  K.T. Chau,et al.  Torque ripple minimization of doubly salient permanent-magnet motors , 2005, IEEE Transactions on Energy Conversion.

[16]  D. Howe,et al.  Analysis of electromagnetic performance of flux-switching permanent-magnet Machines by nonlinear adaptive lumped parameter magnetic circuit model , 2005, IEEE Transactions on Magnetics.

[17]  Sang-Yong Jung,et al.  A Research on Iron Loss of IPMSM With a Fractional Number of Slot Per Pole , 2009 .

[18]  K. Atallah,et al.  AN improved method for predicting iron losses in brushless permanent magnet DC drives , 1992, 1992. Digests of Intermag. International Magnetics Conference.

[19]  T.A. Lipo,et al.  A novel permanent magnet motor with doubly salient structure , 1992, Conference Record of the 1992 IEEE Industry Applications Society Annual Meeting.

[20]  Ming Cheng,et al.  Prediction of iron losses in doubly salient permanent magnet machine with rectangular current waveform , 2012 .

[21]  W. Fu,et al.  A dynamic core loss model for soft ferromagnetic and power ferrite materials in transient finite element analysis , 2004, IEEE Transactions on Magnetics.

[22]  Ming Cheng,et al.  Design and analysis of a new doubly salient permanent magnet motor , 2001 .

[23]  N. Takahashi,et al.  Development of Measuring Equipment of DC-Biased Magnetic Properties Using Open-Type Single-Sheet Tester , 2006, IEEE Transactions on Magnetics.

[24]  K. Yamazaki.  Torque and efficiency calculation of an interior permanent magnet motor considering harmonic iron losses of both the stator and rotor , 2003 .

[25]  W. Marsden.  I and J , 2012 .

[26]  Ming Cheng,et al.  Design and analysis of a novel stator-doubly-fed doubly salient motor for electric vehicles , 2005 .