In Situ Measurement of Fluid Film Thickness in Machining
暂无分享,去创建一个
John P. Sullivan | Srinivasan Chandrasekar | Seongeyl Lee | S. Chandrasekar | J. Sullivan | Chihyung Huang | Seongeyl Lee | Chih-Ping Huang
[1] Jihong Hwang,et al. Large strain deformation field in machining , 2006 .
[2] Jean M. Dasch,et al. A comparison of five categories of carbon-based tool coatings for dry drilling of aluminum , 2006 .
[3] Tianshu Liu,et al. Pressure and Temperature Sensitive Paints , 2004, Experimental Fluid Mechanics.
[4] Srinivasan Chandrasekar,et al. A Model for the Contact Conditions at the Chip-Tool Interface in Machining , 2003 .
[5] Viswanathan Madhavan,et al. Direct Observations of the Chip-Tool Interface in the Low Speed Cutting of Pure Metals , 2002 .
[6] J. Sullivan. Molecular Sensors for MEMS , 2002 .
[7] Bryan Campbell,et al. Temperature- and Pressure-Sensitive Luminescent Paints in Aerodynamics , 1997 .
[8] I. Hutchings,et al. The Kinetics of Gas-Phase Lubrication in the Orthogonal Machining of an Aluminium Alloy , 1995 .
[9] M. C. Shaw,et al. Mechanics of Machining: An Analytical Approach to Assessing Machinability , 1989 .
[10] Ming-Shong Lan,et al. Theoretical analysis of cutting fluid interaction in machining , 1988 .
[11] D. Tabor,et al. Frictional interactions between chip and rake face in continuous chip formation , 1979, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.
[12] David Tabor,et al. The role of lubricants in machining , 1977 .
[13] G. Boothroyd,et al. Lubricating Action of Cutting Fluids , 1965 .
[14] P. W. Wallace,et al. Tool Forces and Tool-Chip Friction in Orthogonal Machining: , 1964 .
[15] K. Nakayama. Studies on the Mechanism of Metal Cutting , 1959 .
[16] W. D. Compton,et al. Effect of Low-Frequency Modulation on Lubrication of Chip-Tool Interface in Machining , 2004 .
[17] S. Fonov,et al. Luminescent pressure sensors in aerodynamic experiments , 1998 .
[18] L. De Chiffre,et al. Mechanics of metal cutting and cutting fluid action , 1977 .