Experimental and numerical study of annular PCM storage in the presence of natural convection

Latent thermal energy storage (TES) systems have shown growing potential in matching the production to the demand in Concentrated Solar Power (CSP) systems. Indeed, the improved storage density and the constant temperature release of energy allow for more compact heat exchanger design and simplify system management. The shell and tubes heat exchanger is the most promising technology, owing to its low cost. However, phase change phenomena occurring during PCM melting (charge) and PCM solidification (discharge) need to be carefully controlled. To better understand the heat exchange involved in this exchanger type, an annular latent storage unit filled with paraffin RT35 is experimentally and numerically studied. A testing loop with visualisation is built to analyse the influence of the heat transfer fluid (HTF) injection side on the system. The experimental test section is modelled with CFD simulations to explain the charge and discharge results. The combined study proves that an injection side coupled with free convection heat transfer mechanism influences the evolution of the PCM melting front. To conclude, a top injection for charge and a bottom one for discharge are recommended.

[1]  Bernard Franković,et al.  Analysis of the influence of operating conditions and geometric parameters on heat transfer in water-paraffin shell-and-tube latent thermal energy storage unit , 2006 .

[2]  L. Cabeza,et al.  Heat and cold storage with PCM: An up to date introduction into basics and applications , 2008 .

[3]  Francis Agyenim,et al.  Heat transfer enhancement in medium temperature thermal energy storage system using a multitube heat transfer array , 2010 .

[4]  M. Cross,et al.  An enthalpy method for convection/diffusion phase change , 1987 .

[5]  Viktoria Martin,et al.  Submerged finned heat exchanger latent heat storage design and its experimental verification , 2012 .

[6]  T. Bauer,et al.  Thermal energy storage for direct steam generation , 2011 .

[7]  A. Oliva,et al.  Numerical simulation of a latent heat thermal energy storage system with enhanced heat conduction , 1998 .

[8]  Francis Agyenim,et al.  A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS) , 2010 .

[9]  Mehmet Esen,et al.  Development of a model compatible with solar assisted cylindrical energy storage tank and variation of stored energy with time for different phase change materials , 1996 .

[10]  M. Kenisarin.  High-temperature phase change materials for thermal energy storage , 2010 .

[11]  Luisa F. Cabeza,et al.  State of the art on high temperature thermal energy storage for power generation. Part 1—Concepts, materials and modellization , 2010 .

[12]  I. Alatiqi,et al.  Heat transfer enhancement by metal screens and metal spheres in phase change energy storage systems , 2004 .

[13]  L. Cabeza,et al.  Experimental evaluation of commercial heat exchangers for use as PCM thermal storage systems , 2009 .

[14]  Martin Belusko,et al.  An effectiveness-NTU technique for characterising tube-in-tank phase change thermal energy storage systems , 2012 .

[15]  Liwu Fan,et al.  Thermal conductivity enhancement of phase change materials for thermal energy storage: A review , 2011 .

[16]  L. S. Yao,et al.  Transient phase-change around a horizontal cylinder , 1981 .

[17]  Kamal Abdel Radi Ismail,et al.  Performance of a thermal storage system of the vertical tube type , 2000 .

[18]  V. Voller.  FAST IMPLICIT FINITE-DIFFERENCE METHOD FOR THE ANALYSIS OF PHASE CHANGE PROBLEMS , 1990 .

[19]  A. Elgafy,et al.  Numerical Study for Enhancing the Thermal Conductivity of Phase Change Material (PCM) Storage using High Thermal Conductivity Porous Matrix , 2005 .

[20]  Luisa F. Cabeza,et al.  Review on thermal energy storage with phase change: materials, heat transfer analysis and applications , 2003 .

[21]  Eduardo Zarza,et al.  Analysis of the experimental behaviour of a 100 kWth latent heat storage system for direct steam generation in solar thermal power plants , 2010 .