B-Dot and D-Dot Sensors for (Sub)Nanosecond High-Voltage and High-Current Pulse Measurements

In this paper, we present a large-bandwidth, high-current, and high-voltage measuring system for pulse measurements in pulsed power systems. The developed sensors can be easily calibrated, require no extensive (3-D) modeling, are very compact, are inexpensive, and have a bandwidth of up to several gigahertz. Moreover, they can be used in any pulsed power system, where a pulse source is connected to its load by a coaxial cable (without disturbing the coaxial geometry). We developed this sensor system for the use with our nanosecond pulse source system. The type of sensors we used is D-dot and B-dot sensors, which are compactly mounted on the coaxial cable that connects our nanosecond pulse source to its load. This enables us to measure the characteristics of each sensor very precisely with a vector network analyzer. With these characteristics-combined with the characteristics of the measuring cable assembly-we can numerically reconstruct the voltage and current waveforms that passed the sensor positions. Our calibration approach, the mounting on the coaxial cable and the postprocessing of the results makes these sensors very flexible. While we use the sensors for energy measurements, camera triggering, and the general measurement of the pulses, other researchers can use these types of sensors as well in any system, where a (coaxial) cable connects a pulse source to its load.

[1]  H. Bluhm.  Pulsed Power Systems: Principles and Applications , 2006 .

[2]  P. Ripka.  Electric current sensors: a review , 2010 .

[3]  W. Stygar,et al.  High Frequency Rogowski Coil Response Characteristics , 1982, IEEE Transactions on Plasma Science.

[4]  Bucur M. Novac,et al.  An ultra-fast electro-optic probe for 500 kV pulsed voltage measurements , 2002 .

[5]  A P J van Deursen,et al.  Inductive Sensor for Lightning Current Measurement, Fitted in Aircraft Windows—Part II: Measurements on an A320 Aircraft , 2011, IEEE Sensors Journal.

[6]  Manfred Kettlitz,et al.  Visualization of a Spark Discharge Driven by a High-Voltage Pulse With Sub-ns Rise-Time at Atmospheric Pressure , 2014, IEEE Transactions on Plasma Science.

[7]  Julien Bergoz,et al.  Current monitors for particle beams , 1991 .

[8]  T. Huiskamp.  Nanosecond pulsed power technology for transient plasma generation , 2015 .

[9]  J. M. Anderson.  Wide Frequency Range Current Transformers , 1971 .

[10]  Eric C. Benck,et al.  Plasma Diagnostic Techniques , 2006 .

[11]  T. Huiskamp,et al.  Design of a Subnanosecond Rise Time, Variable Pulse Duration, Variable Amplitude, Repetitive, High-Voltage Pulse Source , 2014, IEEE Transactions on Plasma Science.

[12]  W. Rogowski,et al.  Die Messung der magnetischen Spannung , 1912 .

[13]  A.P.J. van Deursen,et al.  Passive integrator for ILDAS project , 2011, 10th International Symposium on Electromagnetic Compatibility.

[14]  E. J. M. van Heesch,et al.  First Implementation of a Subnanosecond Rise Time, Variable Pulse Duration, Variable Amplitude, Repetitive, High-Voltage Pulse Source , 2014, IEEE Transactions on Plasma Science.

[15]  Paul W. Smith,et al.  Transient Electronics: Pulsed Circuit Technology , 2002 .

[16]  R. E. Pechacek,et al.  Fast passive integrator , 1984 .

[17]  Marinus Albertus Vanhouten.  Electromagnetic compatibility in high-voltage engineering , 1990 .

[18]  A P J van Deursen,et al.  Inductive Sensor for Lightning Current Measurement, Fitted in Aircraft Windows—Part I: Analysis for a Circular Window , 2011, IEEE Sensors Journal.

[19]  Chenguo Yao,et al.  Contactless measurement of lightning current using self-integrating B-dot probe , 2011, IEEE Transactions on Dielectrics and Electrical Insulation.

[20]  T. Huiskamp,et al.  Final Implementation of a Subnanosecond Rise Time, Variable Pulse Duration, Variable Amplitude, Repetitive, High-Voltage Pulse Source , 2014, IEEE Transactions on Plasma Science.

[21]  M. Kettlitz,et al.  Visualization of a Coaxial Dielectric Barrier Discharge Driven by a Sub-ns Rising High-Voltage Pulse and Its Reflections , 2014, IEEE Transactions on Plasma Science.

[22]  L. P. Mix,et al.  Differential-outputB-dot andD-dot monitors for current and voltage measurements on a 20-MA, 3-MV pulsed-power accelerator , 2008 .

[23]  S. V. Paasen,et al.  Pulsed power corona discharges for air pollution control , 1998 .

[24]  V. Nassisi,et al.  Fast capacitive probe for electromagnetic pulse diagnostic. , 2008, The Review of scientific instruments.

[25]  Sj Stefan Voeten.  Matching high voltage pulsed power technologies , 2013 .

[26]  Bucur M. Novac,et al.  A fast electro-optic high-voltage sensor , 1995 .

[27]  D. Pellinen,et al.  A Nanosecond Risetime Megampere Current Monitor , 1971 .