Effect of stacking pressure on the properties of Si3N4 ceramics fabricated by aqueous tape casting

[1]  Shichao Liu,et al.  Fabrication and properties of cordierite based glass/AlN composites by sol–gel and pressureless sintering , 2016 .

[2]  Lai-fei Cheng,et al.  Laminated HfC–SiC ceramics produced by aqueous tape casting and hot pressing , 2015 .

[3]  M. Andrzejczuk,et al.  Tribological behaviour of Si3N4-based nanocomposites , 2015 .

[4]  Shichao Liu,et al.  A new way of fabricating Si3N4 ceramics by aqueous tape casting and gas pressure sintering , 2015 .

[5]  Guo‐Jun Zhang,et al.  Chemical reactivity of hot-pressed Si3N4–ZrB2 ceramics at 1500–1700 °C , 2015 .

[6]  Shichao Liu,et al.  A route to increase fracture toughness of layered Si3N4/SiC composite using interlocked interfaces , 2015 .

[7]  Shichao Liu,et al.  High-k and ultra-low-loss BADCy/Ni0.5Ti0.5NbO4 composites for PCB application fabricated by cold isostatic pressing and vacuum assisted infiltration processes , 2015, Journal of Materials Science: Materials in Electronics.

[8]  Paolo Colombo,et al.  Additive Manufacturing of Ceramics: Issues, Potentialities, and Opportunities , 2015 .

[9]  Shichao Liu,et al.  Preparation of Aluminum Nitride Ceramics by Aqueous Tape Casting , 2015 .

[10]  Wenbin Liu,et al.  Comparison of aqueous- and non-aqueous-based tape casting for preparing YAG transparent ceramics , 2013 .

[11]  Jingxian Zhang,et al.  Aqueous tape casting of boron carbide ceramic , 2013 .

[12]  J. Günster,et al.  Porous Si3N4 ceramics prepared via partial nitridation and SHS , 2013 .

[13]  Yongge Cao,et al.  Multilayer YAG/Re:YAG/YAG laser ceramic prepared by tape casting and vacuum sintering method , 2012 .

[14]  Litong Zhang,et al.  Effect of chemical vapor infiltration of Si3N4 on the mechanical and dielectric properties of porous Si3N4 ceramic fabricated by a technique combining 3-D printing and pressureless sintering , 2012 .

[15]  Feng Yongbao,et al.  Process dependant setting behavior of aqueous gelcast AlN slurries , 2012 .

[16]  S. Atre,et al.  Review of Net Shape Fabrication of Thermally Conducting Ceramics , 2011 .

[17]  F. Ye,et al.  Effect of solid content on pore structure and mechanical properties of porous silicon nitride ceramics produced by freeze casting , 2011 .

[18]  Haijiao Zhang,et al.  Pore structure and mechanical properties in freeze cast porous Si3N4 composites using polyacrylamide as an addition agent , 2010 .

[19]  D. Jaramillo-Vigueras,et al.  Spark plasma sintering of α-Si3N4 ceramics with Al2O3 and Y2O3 as additives and its morphology transformation , 2010 .

[20]  Tao Zhang,et al.  Aqueous tape casting process for SiC , 2009 .

[21]  Bo Wang,et al.  Microstructure and boundary phases of Lu–Al-doped silicon nitride by pressureless sintering , 2009 .

[22]  S. Ghosh,et al.  Tape Cast Multilayer Composite of Nano Zirconia with High Toughness , 2006 .

[23]  Bao-lin Zhang,et al.  Comparison of Aqueous and Non‐Aqueous Tape Casting of Aluminum Nitride Substrates , 2005 .

[24]  Jingxian Zhang,et al.  Preparation of TiC ceramics through aqueous tape casting , 2005 .

[25]  J. Heinrich,et al.  Aqueous tape casting of silicon nitride , 2002 .

[26]  Volker Piotter,et al.  Injection molding of components for microsystems , 2001 .

[27]  G. Fantozzi,et al.  Processing, microstructure, mechanical properties of Si3N4 obtained by slip casting and pressureless sintering , 2001 .