Actual energy savings from the use of thermostatic radiator valves in residential buildings – Long term field evaluation

Abstract The use of pre-set thermostatic radiator valves (TRVs) contributes to the reduction of energy consumption and the increase of the energy efficiency of the existing heating systems in buildings. However, there are limited long-term experimental studies that document the level of energy savings achieved by the use of TRVs, quantified for three different options of their utilisation. Long-term field data were collected over several heating seasons from nine existing multifamily residential buildings organized into three groups characterized by different modernization activities using TRVs. The first group includes the cases where the buildings are equipped with TRVs without hydraulic balance of the heating system with pre-set TRVs; the second group encompasses buildings that were already equipped with TRVs and then a hydraulic balancing of the heating system was performed by means of a pre-set; finally, the third group of buildings considers the simultaneous installation of TRVs and hydraulic balancing of the heating system using pre-set TRVs. The energy savings ranged between 7.1% and 23.3%, depending on the range of modernization activities using TRVs with or without hydraulic balance. The payback time was less than 2.5 heating seasons in all cases.

[1]  Shengwei Wang,et al.  Intelligent building research: a review , 2005 .

[2]  Kuan Chen,et al.  New developments in illumination, heating and cooling technologies for energy-efficient buildings , 2010 .

[3]  Frauke Oldewurtel,et al.  Experimental analysis of model predictive control for an energy efficient building heating system , 2011 .

[4]  Jakob Stoustrup,et al.  An analytical solution for stability-performance dilemma of hydronic radiators , 2013 .

[5]  Carmine Basilicata,et al.  Assessment of the Impact of a Centralized Heating System Equipped with Programmable Thermostatic Valves on Building Energy Demand , 2016 .

[6]  Nathan Mendes,et al.  Predictive controllers for thermal comfort optimization and energy savings , 2008 .

[7]  A.W.M. van Schijndel,et al.  Reducing peak requirements for cooling by using thermally activated building systems , 2010 .

[8]  A. Życzyńska,et al.  The heat consumption and heating costs after the insulation of building partitions of building complex supplied by the local oil boiler room , 2014 .

[9]  Davide Barbieri,et al.  Effect of Occupant Behavior and Control Systems on the Reduction of Energy Needs of Residential Buildings , 2015 .

[10]  Benjamin C. M. Fung,et al.  A systematic procedure to study the influence of occupant behavior on building energy consumption , 2011 .

[11]  Enrico Fabrizio,et al.  Impact of low investment strategies for space heating control: Application of thermostatic radiators valves to an old residential building , 2015 .

[12]  Lin Fu,et al.  Simulation and analysis on control effectiveness of TRVs in district heating systems , 2011 .

[13]  Ray Galvin,et al.  Targeting ‘behavers’ rather than behaviours: A ‘subject-oriented’ approach for reducing space heating rebound effects in low energy dwellings , 2013 .

[14]  Koen Steemers,et al.  Behavioural, physical and socio-economic factors in household cooling energy consumption , 2011 .

[15]  Domenico Laforgia,et al.  Multi-objective optimization analysis for high efficiency external walls of zero energy buildings (ZEB) in the Mediterranean climate , 2014 .

[16]  William D'haeseleer,et al.  Control of heating systems in residential buildings: Current practice , 2008 .

[17]  Joachim Seifert,et al.  “Review of thermostatic control valves in the European standardization system of the EN 15316-2/EN 215” , 2016 .

[18]  Lin Fu,et al.  Dynamic simulation of space heating systems with radiators controlled by TRVs in buildings , 2008 .

[19]  Lukas Ferkl,et al.  Model predictive control of a building heating system: The first experience , 2011 .