High Pressure and Split Injection Strategies for Fuel Efficiency and Emissions in DI Diesel Engine

[1]  Fan Zhang,et al.  Investigation of two-stage split-injection strategies for a Dieseline fuelled PPCI engine , 2013 .

[2]  Rizalman Mamat,et al.  Effect of Injection Pressure with Split Injection in a V6 Diesel Engine , 2009 .

[3]  John B. Heywood,et al.  Two-stage ignition in HCCI combustion and HCCI control by fuels and additives , 2003 .

[4]  R. A. White,et al.  Effects of injection angles on combustion processes using multiple injection strategies in an HSDI diesel engine , 2008 .

[5]  Masahiro Taki,et al.  Noise and Emissions Reduction by Second Injection in Diesel PCCI Combustion with Split Injection , 2014 .

[6]  D. Brueggemann,et al.  Effect of Split Injection on the Combustion and In-Cylinder Soot Formation Characteristics of Low Compression Ratio Neat Gas-To-Liquid-Fueled DI Diesel Engine , 2012 .

[7]  T. Ishiyama,et al.  Heat Release Rate and NOx Formation Process in Two-Stage Injection Diesel PCCI Combustion in a Constant-Volume Vessel , 2010 .

[8]  An experimental study on the effects of high-pressure and multiple injection strategies on DI diesel engine emissions , 2013 .

[9]  Benoist Thirouard,et al.  Using Multiple Injection Strategies in Diesel Combustion: Potential to Improve Emissions, Noise and Fuel Economy Trade-Off in Low CR Engines , 2008 .

[10]  Gregory M. Shaver,et al.  Piezoelectric fuel injection: Cycle-to-cycle control of tightly spaced injections , 2012 .

[11]  Choongsik Bae,et al.  Effect of air–fuel mixing quality on characteristics of conventional and low temperature diesel combustion , 2014 .

[12]  Russell P. Durrett,et al.  Multiple-Event Fuel Injection Investigations in a Highly-Dilute Diesel Low Temperature Combustion Regime , 2009 .

[13]  Rolf D. Reitz,et al.  Two-color combustion visualization of single and split injections in a single-cylinder, heavy-duty D.I. diesel engine using an endoscope-based imaging system , 1999 .

[14]  S. Park,et al.  Engine performance and exhaust emissions in stoichiometric combustion engines fuelled with dimethyl ether , 2012 .

[15]  Seokjoo Kwon,et al.  An experimental and modelling study of the combustion and emission characteristics for gasoline–diesel dual-fuel engines , 2011 .

[16]  W. Ojeda,et al.  Development of a Fuel Injection Strategy for Partially Premixed Compression Ignition Combustion , 2009 .

[17]  Carlo Alberto Rinaldini,et al.  Experimental and Numerical Investigation of Split Injections at Low Load in an HDDI Diesel Engine Equipped with a Piezo Injector, SAE 2006-01-3433 , 2006 .

[18]  Ezio Spessa,et al.  Ignition delay prediction of multiple injections in diesel engines , 2014 .

[19]  Xiaobei Cheng,et al.  Investigations of split injection strategies for the improvement of combustion and soot emissions characteristics based on the two-color method in a heavy-duty diesel engine , 2013 .

[20]  John B. Heywood,et al.  Internal combustion engine fundamentals , 1988 .

[21]  Hua Zhao,et al.  Experimental investigation into the effects of two-stage injection on fuel injection quantity, combustion and emissions in a high-speed optical common rail diesel engine , 2013 .

[22]  Ricardo Novella,et al.  An Investigation on Mixing and Auto-ignition using Diesel and Gasoline in a Direct-Injection Compression-Ignition Engine Operating in PCCI Combustion Conditions , 2011 .

[23]  P. Das,et al.  Study of Combustion Behavior and Combustion Stability of HCCI-DI Combustion for a Wide Operating Range using a Low Cost Novel Experimental Technique , 2014 .

[24]  C. Bae,et al.  Post injection in a compression ignition engine fueled with dimethyl-ether , 2013 .

[25]  J. Senda,et al.  Effects of Mixedness and Ignition Timings on PCCI Combustion with a Dual Fuel Operation , 2011 .

[26]  Sangyul Lee,et al.  The Effects of Injection Timing and Piston Bowl Shape on PHCCI Combustion with Split injections , 2010 .