An Adaptive Frequency Hopping TechniqueWith Application to Bluetooth-WLAN Coexistence

In this paper, a new adaptive frequency hopping (AFH) technique is proposed in an attempt to mitigate the interference between Bluetooth (IEEE 802.15) and wireless local area networks (WLANs) (IEEE 802.11b). The new AFH technique optimizes the carrier spacing according to the network load and noise level. For a given overall bandwidth and data rate, reducing the separation between adjacent channels has a positive effect of increasing the number of available hopping channels. This can definitely lead to decreasing the collision rate. On the other hand, decreasing the channel spacing increases the adjacent channel interference. Therefore, there exists an optimal channel spacing that maximizes the network throughput. Rayleigh fading was considered and results show that the new AFH technique outperforms existing AFH techniques for a wide range of network loads.

[1]  I. Howitt.  IEEE 802.11 and Bluetooth coexistence analysis methodology , 2001, IEEE VTS 53rd Vehicular Technology Conference, Spring 2001. Proceedings (Cat. No.01CH37202).

[2]  Mobilian,et al.  Wi-FiTM (802.11b) and BluetoothTM: An Examination of Coexistence Approaches , 2001 .

[3]  Ian D. Henning,et al.  On the channel spacing of multichannel ALOHA , 2003, IEEE Communications Letters.

[4]  Dharma P. Agrawal,et al.  A novel architecture and coexistence method to provide global access to/from Bluetooth WPANs by IEEE 802.11 WLANs , 2003, Conference Proceedings of the 2003 IEEE International Performance, Computing, and Communications Conference, 2003..

[5]  Ivan Howitt,et al.  Site specific WLAN and WPAN coexistence evaluation , 2003, 2003 IEEE Wireless Communications and Networking, 2003. WCNC 2003..

[6]  Marc Langheinrich,et al.  First Experiences with Bluetooth in the Smart-Its Distributed Sensor Network , 2001 .