A multi-regional structural path analysis of the energy supply chain in China's construction industry

The construction industry in China exerts significant environmental impacts and uses considerable resources because of rapid urbanization. This study conducted a structural path analysis (SPA) based on the multi-regional input–output table to quantify environmental impact transmission in the entire supply chain. Results indicated that the direct resource input (the first stage) along with on-site construction (the zeroth stage) consumed the highest amount of energy in the supply chain and accounted for approximately 50% of total energy consumption. Regional analysis showed that energy consumption in the construction industry at the provincial level was self-sufficient. Sectoral analysis demonstrated that the direct inputs from the sectors of “manufacture of non-metallic mineral products” and “smelting and pressing of metals” generated the most important energy flows, whereas the sectors of “production and distribution of electric power and heat power” and “extraction of petroleum and natural gas” significantly but indirectly influenced energy use. Sensitivity analysis exhibited that the system boundary of SPA could be narrowed down into the first two upstream stages that contained nearly 50% of energy flow information or expanded toward the first five upstream stages that represented 80% of total energy consumption.

[1]  Geoffrey Qiping Shen,et al.  Greenhouse gas emissions during the construction phase of a building: a case study in China , 2015 .

[2]  R. Ries,et al.  The quantification of the embodied impacts of construction projects on energy, environment, and society based on I-O LCA , 2011 .

[3]  Yue-Jun Zhang,et al.  The impact of economic growth, industrial structure and urbanization on carbon emission intensity in China , 2014, Natural Hazards.

[4]  Manfred Lenzen,et al.  Environmentally important paths, linkages and key sectors in the Australian economy , 2003 .

[5]  Hongmei Zheng,et al.  Multi-regional input–output model and ecological network analysis for regional embodied energy accounting in China , 2015 .

[6]  K. Turner,et al.  The CO2 'trade balance' between Scotland and the rest of the UK: Performing a multi-region environmental input-output analysis with limited data , 2008 .

[7]  Manfred Lenzen,et al.  A guide for compiling inventories in hybrid life-cycle assessments: some Australian results , 2002 .

[8]  N. Nakicenovic,et al.  Climate change 2007: Mitigation. Contribution of Working Group III to the Fourth Assessment Report of the Intergovernmental Panel on Climate Change. Summary for Policymakers. , 2007 .

[9]  Manfred Lenzen,et al.  CO2 Multipliers in Multi-region Input-Output Models , 2004 .

[10]  Manfred Lenzen,et al.  Structural path decomposition , 2009 .

[11]  Bo Zhang,et al.  The impact of domestic trade on China's regional energy uses: A multi-regional input–output modeling , 2013 .

[12]  Manfred Lenzen,et al.  Energy requirements of Sydney households , 2004 .

[13]  Robert Ries,et al.  Life-cycle energy of residential buildings in China , 2013 .

[14]  Guoqian Chen,et al.  An overview of energy consumption of the globalized world economy , 2011 .

[15]  B. W. Ang,et al.  Input–output analysis of CO2 emissions embodied in trade: Competitive versus non-competitive imports , 2013 .

[16]  Guangfei Yang,et al.  A comparative study on the influential factors of China's provincial energy intensity , 2016 .

[17]  C. Weber.  Measuring structural change and energy use: Decomposition of the US economy from 1997 to 2002 , 2009 .

[18]  G. Peters,et al.  GHG emissions in the global supply chain of food products , 2008 .

[19]  John Barrett,et al.  Identification of 'carbon hot-spots' and quantification of GHG intensities in the biodiesel supply chain using hybrid LCA and structural path analysis. , 2011, Environmental science & technology.

[20]  Jacques Defourny,et al.  STRUCTURAL PATH ANALYSIS AND MULTIPLIER DECOMPOSITION WITHIN A SOCIAL ACCOUNTING MATRIX FRAMEWORK , 1984 .

[21]  Sven Lundie,et al.  A hybrid life cycle assessment model for comparison with conventional methodologies in Australia , 2009 .

[22]  David Roland-Holst,et al.  Energy and exports in China , 2008 .

[23]  Klaus Hubacek,et al.  A "carbonizing dragon": China's fast growing CO2 emissions revisited. , 2011, Environmental science & technology.

[24]  Ilmo Mäenpää,et al.  Greenhouse gases embodied in the international trade and final consumption of Finland: An input–output analysis , 2007 .

[25]  Edgar G. Hertwich,et al.  Structural analysis of international trade: Environmental impacts of Norway , 2006 .

[26]  Manfred Lenzen,et al.  Examining the global environmental impact of regional consumption activities — Part 2: Review of input–output models for the assessment of environmental impacts embodied in trade , 2007 .

[27]  Edgar G. Hertwich,et al.  Pollution embodied in trade: The Norwegian case , 2006 .

[28]  Peter E.D. Love,et al.  Using national input/output data for embodied energy analysis of individual residential buildings , 2001 .

[29]  R. Crawford.  Validation of a hybrid life-cycle inventory analysis method. , 2008, Journal of environmental management.

[30]  D. Roberts.  The role of households in sustaining rural economies: A structural path analysis , 2005 .

[31]  Peter E.D. Love,et al.  Improving the reliability of embodied energy methods for project life‐cycle decision making , 2001 .

[32]  Tsuyoshi Fujita,et al.  Embodied energy use in China's industrial sectors , 2012 .

[33]  Wen Hong,et al.  Building Energy Efficiency: Why Green Buildings Are Key to Asia's Future , 2007 .

[34]  Yue-Jun Zhang,et al.  The decomposition of energy-related carbon emission and its decoupling with economic growth in China , 2015 .

[35]  Ge Chen,et al.  Greenhouse gas emissions and natural resources use by the world economy: Ecological input–output modeling , 2011 .

[36]  Manfred Lenzen,et al.  Structural path analysis of ecosystem networks , 2007 .

[37]  Frederick V. Waugh,et al.  Inversion of the Leontief Matrix by Power Series , 1950 .

[38]  Yong Geng,et al.  Uncovering China’s greenhouse gas emission from regional and sectoral perspectives , 2012 .

[39]  E. Hertwich,et al.  Pollution Embodied in Norwegian Consumption , 2004 .

[40]  Seung Heon Han,et al.  The implementation of clean development mechanism (CDM) in the construction and built environment industry , 2014 .

[41]  Mark Allen Weiss,et al.  Data structures and algorithm analysis in Ada , 1993 .

[42]  Zhan-Ming Chen,et al.  Demand-driven energy requirement of world economy 2007: A multi-region input-output network simulation , 2013, Commun. Nonlinear Sci. Numer. Simul..

[43]  Mark J. Johnson.  A Concise Introduction to Data Structures using Java , 2013 .

[44]  S. Joshi.  Product Environmental Life‐Cycle Assessment Using Input‐Output Techniques , 1999 .

[45]  Yue‐Jun Zhang,et al.  Direct energy rebound effect for road passenger transport in China: A dynamic panel quantile regression approach , 2015 .

[46]  G. Treloar.  Extracting Embodied Energy Paths from Input–Output Tables: Towards an Input–Output-based Hybrid Energy Analysis Method , 1997 .

[47]  T. Wiedmann.  A review of recent multi-region input–output models used for consumption-based emission and resource accounting , 2009 .

[48]  Bo Zhang,et al.  Greenhouse gas emissions in China 2007: Inventory and input-output analysis , 2010 .

[49]  Peter E.D. Love,et al.  Hybrid Life-Cycle Inventory for Road Construction and Use , 2004 .

[50]  Edgar G. Hertwich,et al.  The Importance of Imports for Household Environmental Impacts , 2006 .

[51]  Geoffrey Qiping Shen,et al.  Energy use embodied in China's construction industry: A multi-regional input-output analysis , 2016 .

[52]  Ju’e Guo,et al.  China’s provincial CO2 emissions embodied in international and interprovincial trade , 2012 .