Automatic extraction of rock mass discontinuity based on 3D laser scanning

Discontinuity information is important in evaluating the security of a rock mass for the distribution of discontinuity spacings, which affects the mechanical properties and stability of the rock mass. Numerous studies have been conducted on the semi-automatic or automatic extraction of discontinuities from point cloud data. We developed a random sample consensus discontinuity detection (RANSAC) method to automatically extract discontinuities in a rock mass. The proposed method is entirely based on a raw point instead of a triangular mesh, which can retain the integrity of the data. A modified RANSAC algorithm is used to increase the degree of automation. The proposed approach consists of four steps: (1) calculation of the normal vector of the point cloud; (2) plane extraction using the modified RANSAC algorithm; (3) delineation of the boundary of the discontinuity using the modified Graham scan algorithm; and (4) calculation of the orientation and area on the basis of the normal vector and the boundary of the discontinuity. The results and the raw data source are freely provided for reproducible research and to develop the method further.

[1]  Roberto Tomás,et al.  Characterization of rock slopes through slope mass rating using 3D point clouds , 2016 .

[2]  O. Stephansson,et al.  Measuring fracture orientation at exposed rock faces by using a non-reflector total station , 2001 .

[3]  Ahmet Hamdi Deliormanli,et al.  Using terrestrial 3D laser scanning and optical methods to determine orientations of discontinuities at a granite quarry , 2014 .

[4]  John F. Ferguson,et al.  Outcrop fracture characterization using terrestrial laser scanners: Deep-water Jackfork sandstone at big rock quarry, Arkansas , 2008 .

[5]  R. Hack,et al.  Method for Automated Discontinuity Analysis of Rock Slopes with Three-Dimensional Laser Scanning , 2005 .

[6]  S. Slob.  Automated rock mass characterisation using 3-D terrestrial laser scanning , 2010 .

[7]  Adrián J. Riquelme,et al.  A new approach for semi-automatic rock mass joints recognition from 3D point clouds , 2014, Comput. Geosci..

[8]  S. Mohanty,et al.  Geological and geotechnical studies around Kaswati dam, Kachchh, India: implications on tectonic stability, rock mass property and water retention capacity , 2018, Quarterly Journal of Engineering Geology and Hydrogeology.

[9]  I. Yilmaz,et al.  Rock mass parameters based doline susceptibility mapping in gypsum terrain , 2015 .

[10]  Yinan Yu,et al.  Towards semi-automatic rock mass discontinuity orientation and set analysis from 3D point clouds , 2017, Comput. Geosci..

[11]  Xiaojun Li,et al.  Automatic extraction of discontinuity orientation from rock mass surface 3D point cloud , 2016, Comput. Geosci..

[12]  A. Abellán,et al.  Discontinuity spacing analysis in rock masses using 3D point clouds , 2015 .

[13]  Faquan Wu,et al.  Automatic identification and characterization of discontinuities in rock masses from 3D point clouds , 2020 .

[14]  Matthew J. Lato,et al.  Rock bench: Establishing a common repository and standards for assessing rockmass characteristics using LiDAR and photogrammetry , 2013, Comput. Geosci..

[15]  R. J. Pine,et al.  Rock mass properties for engineering design , 2003, Quarterly Journal of Engineering Geology and Hydrogeology.

[16]  Mark S. Diederichs,et al.  Optimization of LiDAR scanning and processing for automated structural evaluation of discontinuities in rockmasses , 2009 .

[17]  M. R. Zareifard.  A new semi-numerical method for elastoplastic analysis of a circular tunnel excavated in a Hoek–Brown strain-softening rock mass considering the blast-induced damaged zone , 2020 .

[18]  Stephen D. McKinnon,et al.  3D laser imaging for joint orientation analysis , 2011 .

[19]  D. Deb,et al.  Automatic detection and analysis of discontinuity geometry of rock mass from digital images , 2008, Comput. Geosci..

[20]  H. Akgün,et al.  Stochastic geometry model of rock mass fracture network in tunnels , 2018, Quarterly Journal of Engineering Geology and Hydrogeology.

[21]  Slawomir J. Nasuto,et al.  NAPSAC: High Noise, High Dimensional Robust Estimation - it's in the Bag , 2002, BMVC.

[22]  Peihua Li,et al.  Robust and accurate iris segmentation in very noisy iris images , 2010, Image Vis. Comput..

[23]  Yunfeng Ge,et al.  Automated measurements of discontinuity geometric properties from a 3D-point cloud based on a modified region growing algorithm , 2018, Engineering Geology.

[24]  Lixin Wu,et al.  Towards automatic discontinuity trace extraction from rock mass point cloud without triangulation , 2018, International Journal of Rock Mechanics and Mining Sciences.

[25]  Hehua Zhu,et al.  Semi-automatic extraction of rock discontinuities from point clouds using the ISODATA clustering algorithm and deviation from mean elevation , 2018, International Journal of Rock Mechanics and Mining Sciences.

[26]  Dwayne D. Tannant,et al.  Automated method for extracting and analysing the rock discontinuities from point clouds based on digital surface model of rock mass , 2018 .

[27]  Jon Louis Bentley,et al.  An Algorithm for Finding Best Matches in Logarithmic Expected Time , 1977, TOMS.

[28]  Nicola Casagli,et al.  Semi-automatic extraction of rock mass structural data from high resolution LIDAR point clouds , 2011 .

[29]  Christian Cachard,et al.  Automatic Needle Detection and Tracking in 3D Ultrasound Using an ROI-Based RANSAC and Kalman Method , 2013, Ultrasonic imaging.