Micro Additive manufacturing using ulra short laser pulses

[1]  Maria Goeppert-Mayer.  Über Elementarakte mit zwei Quantensprüngen , 1931 .

[2]  C. Garrett,et al.  Two-Photon Excitation in CaF 2 : Eu 2+ , 1961 .

[3]  L. Keldysh,et al.  IONIZATION IN THE FIELD OF A STRONG ELECTROMAGNETIC WAVE , 1964 .

[4]  F. J. Adrian,et al.  Metal deposition from a supported metal film using an excimer laser , 1986 .

[5]  R. K. Williams,et al.  Thermal conductivity of metals and alloys , 1986 .

[6]  A. N. Jette,et al.  Metal deposition at 532 nm using a laser transfer technique , 1988 .

[7]  Eric Fogarassy,et al.  Laser‐induced forward transfer of high‐Tc YBaCuO and BiSrCaCuO superconducting thin films , 1989 .

[8]  Zsolt Toth,et al.  Pulsed laser processing of Ge/Se thin film structures , 1991 .

[9]  V. Schultze,et al.  Laser-induced forward transfer of aluminium , 1991 .

[10]  Dana D. Dlott,et al.  High-speed color imaging by laser ablation transfer with a dynamic release layer: fundamental mechanisms , 1993 .

[11]  C. L. Tien,et al.  Heat transfer mechanisms during short-pulse laser heating of metals , 1993 .

[12]  Tamás Szörényi,et al.  Deposition of micrometer-sized tungsten patterns by laser transfer technique , 1994 .

[13]  Anthony J. Pedraza,et al.  New approach of a laser-induced forward transfer for deposition of patterned thin metal films , 1995 .

[14]  Droplet formation on metallic surfaces during low-fluence laser irradiation , 1996 .

[15]  A. Tünnermann,et al.  Femtosecond, picosecond and nanosecond laser ablation of solids , 1996 .

[16]  S. Kawata,et al.  Three-dimensional microfabrication with two-photon-absorbed photopolymerization. , 1997, Optics letters.

[17]  Costas Fotakis,et al.  Microdeposition of metals by femtosecond excimer laser , 1998 .

[18]  Nikolai I. Koroteev,et al.  Fabrication of three-dimensional periodic microstructures by means of two-photon polymerization , 1998 .

[19]  Satoshi Kawata,et al.  Two-photon-absorbed near-infrared photopolymerization for three-dimensional microfabrication , 1998 .

[20]  Computer simulations of laser-induced ejection of droplets , 1998 .

[21]  Yoshiki Nakata,et al.  Time-resolved microscopic imaging of the laser-induced forward transfer process , 1999 .

[22]  Michael O. Thompson,et al.  Laser-assisted transfer of silicon by explosive hydrogen release , 1999 .

[23]  R. A. McGill,et al.  A novel laser transfer process for direct writing of electronic and sensor materials , 1999 .

[24]  P. R. Bolton,et al.  Laser-induced back ablation of aluminum thin films using picosecond laser pulses , 1999 .

[25]  William D. Brown,et al.  Femtosecond laser-induced periodic structure writing on diamond crystals and microclusters , 1999 .

[26]  J. Güdde,et al.  Electron and lattice dynamics following optical excitation of metals , 2000 .

[27]  J. Ye,et al.  Real three-dimensional microstructures fabricated by photopolymerization of resins through two-photon absorption. , 2000, Optics letters.

[28]  Yong Liu,et al.  Multiphoton-absorbing organic materials for microfabrication, emerging optical applications and non-destructive three-dimensional imaging , 2000 .

[29]  Alberto Piqué,et al.  Time-resolved optical microscopy of a laser-based forward transfer process , 2001 .

[30]  Satoshi Kawata,et al.  Finer features for functional microdevices , 2001, Nature.

[31]  S Esener,et al.  Cationic two-photon induced polymerization with high dynamic range. , 2001, Optics express.

[32]  Guillaume Petite,et al.  Ablation threshold dependence on pulse duration for copper , 2002 .

[33]  Hirokazu Yamada,et al.  Experimental investigation of laser induced forward transfer process of metal thin films , 2002 .

[34]  Wolfgang Schulz,et al.  Laser machining by short and ultrashort pulses, state of the art , 2002 .

[35]  Alberto Piqué,et al.  Plume and jetting regimes in a laser based forward transfer process as observed by time-resolved optical microscopy , 2002 .

[36]  B. Luk’yanchuk,et al.  Selected problems of laser ablation theory , 2002 .

[37]  Costas Fotakis,et al.  Shadowgraphic imaging of the sub-ps laser-induced forward transfer process , 2002 .

[38]  T. Chong,et al.  Models for laser ablation of polymers. , 2003, Chemical reviews.

[39]  Satoshi Kawata,et al.  Two-photon photopolymerization as a tool for making micro-devices , 2003 .

[40]  Yaroslava G Yingling,et al.  Computer simulations of laser ablation of molecular substrates. , 2003, Chemical reviews.

[41]  C. Bowman,et al.  Modeling thermal and optical effects on photopolymerization systems , 2003 .

[42]  B N Chichkov,et al.  Femtosecond laser-induced two-photon polymerization of inorganic-organic hybrid materials for applications in photonics. , 2003, Optics letters.

[43]  Satoshi Kawata,et al.  Scaling laws of voxels in two-photon photopolymerization nanofabrication , 2003 .

[44]  Aleksandr Ovsianikov,et al.  Fabrication of woodpile structures by two-photon polymerization and investigation of their optical properties. , 2004, Optics express.

[45]  Min Gu,et al.  Complex-shaped three-dimensional microstructures and photonic crystals generated in a polysiloxane polymer by two-photon microstereolithography , 2004 .

[46]  Douglas B. Chrisey,et al.  Absorbing film assisted laser induced forward transfer of fungi (Trichoderma conidia) , 2004 .

[47]  Martin Richardson,et al.  Direct femtosecond laser writing of waveguides in As2S3 thin films. , 2004, Optics letters.

[48]  Jörg Krüger,et al.  Ultrashort pulse laser interaction with dielectrics and polymers , 2004 .

[49]  David J. Hagan,et al.  Two-photon absorption cross-sections of common photoinitiators , 2004 .

[50]  B R Ringeisen,et al.  Printing of protein microarrays via a capillary‐free fluid jetting mechanism , 2005, Proteomics.

[51]  Vicentiu Grosu,et al.  Microdroplet deposition by laser-induced forward transfer , 2005 .

[52]  Dong-Yol Yang,et al.  Contour offset algorithm for precise patterning in two-photon polymerization , 2005 .

[53]  Zsolt Bor,et al.  Survival and proliferative ability of various living cell types after laser-induced forward transfer. , 2005, Tissue engineering.

[54]  Douglas B. Chrisey,et al.  Time-resolved study of absorbing film assisted laser induced forward transfer of Trichoderma longibrachiatum conidia , 2005 .

[55]  Costas Fotakis,et al.  Time resolved schlieren study of sub-pecosecond and nanosecond laser transfer of biomaterials , 2005 .

[56]  Nikita M. Bityurin,et al.  8 Studies on laser ablation of polymers , 2005 .

[57]  M. Colina,et al.  DNA deposition through laser induced forward transfer. , 2005, Biosensors & bioelectronics.

[58]  Akihiko Shimizu,et al.  Heat transport analysis for femtosecond laser ablation with molecular dynamics-two temperature model method , 2006 .

[59]  S. Kawata,et al.  Two-photon-induced reduction of metal ions for fabricating three-dimensional electrically conductive metallic microstructure , 2006 .

[60]  M. Gu,et al.  Two-photon polymerisation for three-dimensional micro-fabrication , 2006 .

[61]  Boris N. Chichkov,et al.  Two-Photon Polymerization: A New Approach to Micromachining Femtosecond lasers enable microfabrication with resolution beyond the diffraction limit. , 2006 .

[62]  L. Chai,et al.  Microdroplet deposition of copper film by femtosecond laser-induced forward transfer , 2006 .

[63]  Ioanna Zergioti,et al.  Nanodroplets deposited in microarrays by femtosecond Ti:sapphire laser-induced forward transfer , 2006 .

[64]  Josep Samitier,et al.  Laser-induced forward Transfer: a Direct-writing Technique for Biosensors Preparation , 2006 .

[65]  Satoshi Kawata,et al.  Three-dimensional fabrication of metallic nanostructures over large areas by two-photon polymerization. , 2006, Optics express.

[66]  Costas Fotakis,et al.  Laser patterning of Zn for ZnO nanostructure growth: Comparison between laser induced forward transfer in air and in vacuum , 2007 .

[67]  Satoshi Kawata,et al.  Improving spatial resolution of two-photon microfabrication by using photoinitiator with high initiating efficiency , 2007 .

[68]  P. Balling,et al.  Short-pulse ablation rates and the two-temperature model , 2007 .

[69]  Nikita M. Bityurin,et al.  Spatial resolution in polymerization of sample features at nanoscale , 2007 .

[70]  B. Chichkov,et al.  Two-Photon Polymerization – High Resolution 3D Laser Technology and Its Applications , 2008 .

[71]  E. Mazur,et al.  Femtosecond laser micromachining in transparent materials , 2008 .

[72]  J. M. Fernández-Pradas,et al.  Jet formation in the laser forward transfer of liquids , 2008 .

[73]  M. Grujicic,et al.  Study of Impact-Induced Mechanical Effects in Cell Direct Writing Using Smooth Particle Hydrodynamic Method , 2008 .

[74]  C. Fotakis,et al.  Laser induced forward transfer of metals by temporally shaped femtosecond laser pulses. , 2008, Optics express.

[75]  Dong-Yol Yang,et al.  Advances in 3D nano/microfabrication using two-photon initiated polymerization , 2008 .

[76]  Femtosecond laser induced forward transfer techniques for the deposition of nanoscale, intact, and solid-phase material , 2008 .

[77]  B. Garrison,et al.  Elucidating the thermal, chemical, and mechanical mechanisms of ultraviolet ablation in poly(methyl methacrylate) via molecular dynamics simulations. , 2008, Accounts of chemical research.

[78]  Shoji Maruo,et al.  Femtosecond laser direct writing of metallic microstructures by photoreduction of silver nitrate in a polymer matrix. , 2008, Optics express.

[79]  P. Prasad,et al.  Multiphoton absorbing materials: molecular designs, characterizations, and applications. , 2008, Chemical Reviews.

[80]  Panos S. Shiakolas,et al.  Modeling of temperature-dependent diffusion and polymerization kinetics and their effects on two-photon polymerization dynamics , 2008 .

[81]  G. M. Petrov,et al.  Interaction of intense ultra-short laser pulses with dielectrics , 2008 .

[82]  R. Eason,et al.  Shadowgraphic studies of triazene assisted laser-induced forward transfer of ceramic thin films , 2009 .

[83]  J. M. Fernández-Pradas,et al.  Time-resolved imaging of the laser forward transfer of liquids , 2009 .

[84]  Interplay between Chemical, Thermal, and Mechanical Processes Occurring upon Laser Excitation of Poly(methyl methacrylate) and Its Role in Ablation† , 2009 .

[85]  Hong Xia,et al.  Remote manipulation of micronanomachines containing magnetic nanoparticles. , 2009, Optics letters.

[86]  M. Göppert-Mayer,et al.  Elementary processes with two quantum transitions , 2009 .

[87]  Hong Xia,et al.  Three-dimensional micronanofabrication via two-photon-excited photoisomerization , 2009 .

[88]  Yong Huang,et al.  Droplet formation in matrix-assisted pulsed-laser evaporation direct writing of glycerol-water solution , 2009 .

[89]  J. Hebling,et al.  A general Z-scan theory , 2009, CLEO/Europe - EQEC 2009 - European Conference on Lasers and Electro-Optics and the European Quantum Electronics Conference.

[90]  David P Banks,et al.  Influence of optical standing waves on the femtosecond laser-induced forward transfer of transparent thin films. , 2009, Applied optics.

[91]  Scott A. Mathews,et al.  Laser decal transfer of freestanding microcantilevers and microbridges , 2009 .

[92]  A. I. Kuznetsov,et al.  Laser-induced backward transfer of gold nanodroplets. , 2009, Optics express.

[93]  Michael R. Stoneman,et al.  Real-time monitoring of two-photon photopolymerization for use in fabrication of microfluidic devices. , 2009, Lab on a chip.

[94]  F. Guillemot,et al.  High-throughput laser printing of cells and biomaterials for tissue engineering. , 2010, Acta biomaterialia.

[95]  M. Duocastella,et al.  Sessile droplet formation in the laser-induced forward transfer of liquids: A time-resolved imaging study , 2010 .

[96]  Fabien Guillemot,et al.  Laser-assisted cell printing: principle, physical parameters versus cell fate and perspectives in tissue engineering. , 2010, Nanomedicine.

[97]  L. Koch,et al.  Laser printing of cells into 3D scaffolds , 2010, Biofabrication.

[98]  Frank Nüesch,et al.  Laser-Induced Forward Transfer of Organic LED Building Blocks Studied by Time-Resolved Shadowgraphy† , 2010 .

[99]  Tommaso Baldacchini,et al.  In situ and real time monitoring of two-photon polymerization using broadband coherent anti-Stokes Raman scattering microscopy. , 2010, Optics express.

[100]  N. Bulgakova,et al.  Thermodynamic and stress analysis of laser-induced forward transfer of metals , 2010 .

[101]  Boris N. Chichkov,et al.  Medical prototyping using two photon polymerization , 2010 .

[102]  Nikita M. Bityurin,et al.  Spatial confinement of percolation: Monte Carlo modeling and nanoscale laser polymerization , 2010 .

[103]  Fabien Guillemot,et al.  In vivo bioprinting for computer- and robotic-assisted medical intervention: preliminary study in mice , 2010, Biofabrication.

[104]  Mangirdas Malinauskas,et al.  Femtosecond visible light induced two-photon photopolymerization for 3D micro/nanostructuring in photoresists and photopolymers , 2010 .

[105]  Saulius Juodkazis,et al.  Mechanisms of three-dimensional structuring of photo-polymers by tightly focussed femtosecond laser pulses. , 2010, Optics express.

[106]  Yong Huang,et al.  Laser-based direct-write techniques for cell printing , 2010, Biofabrication.

[107]  T. Lippert,et al.  Laser induced forward transfer of soft materials , 2010 .

[108]  M. Oujja,et al.  Femtosecond laser deposition of TiO2 by laser induced forward transfer , 2010 .

[109]  Peter Balling,et al.  Ultra-short pulse laser ablation of copper, silver and tungsten: experimental data and two-temperature model simulations , 2011 .

[110]  M. Hong,et al.  Laser nano-manufacturing - State of the art and challenges , 2011 .

[111]  A. Veld,et al.  2D and 3D Interconnect Fabrication by Picosecond Laser Induced Forward Transfer , 2011 .

[112]  Mathias Wilhelmi,et al.  Laser printing of three-dimensional multicellular arrays for studies of cell-cell and cell-environment interactions. , 2011, Tissue engineering. Part C, Methods.

[113]  F. Guillemot,et al.  Effect of laser energy, substrate film thickness and bioink viscosity on viability of endothelial cells printed by Laser-Assisted Bioprinting , 2011 .

[114]  Douglas B. Chrisey,et al.  Matrix-assisted pulsed laser methods for biofabrication , 2011 .

[115]  B. Chichkov,et al.  Fabrication of microscale medical devices by two-photon polymerization with multiple foci via a spatial light modulator , 2011, Biomedical optics express.

[116]  Simulation and Correction of Angular Defects in Two-Photon Lithography , 2011 .

[117]  David T Corr,et al.  The maintenance of pluripotency following laser direct-write of mouse embryonic stem cells. , 2011, Biomaterials.

[118]  Claudia Unger,et al.  Dispensing pico to nanolitre of a natural hydrogel by laser-assisted bioprinting , 2011, Biomedical engineering online.

[119]  David T Corr,et al.  Gelatin-based laser direct-write technique for the precise spatial patterning of cells. , 2011, Tissue engineering. Part C, Methods.

[120]  Juergen Koch,et al.  Time-resolved imaging of hydrogel printing via laser-induced forward transfer , 2011 .

[121]  F. Guillemot,et al.  Laser-assisted bioprinting for creating on-demand patterns of human osteoprogenitor cells and nano-hydroxyapatite , 2011, Biofabrication.

[122]  C. Arnold,et al.  Finite element analysis of blister formation in laser-induced forward transfer , 2011 .

[123]  A. Schambach,et al.  Skin tissue generation by laser cell printing , 2012, Biotechnology and bioengineering.

[124]  L. Overmeyer,et al.  Time-resolved studies of femtosecond-laser induced melt dynamics. , 2012, Optics express.

[125]  Jürgen Köhler,et al.  Physical model for the laser induced forward transfer process , 2012 .

[126]  A. Wokaun,et al.  A simple model for flyer velocity from laser-induced forward transfer with a dynamic release layer , 2012 .

[127]  C. Fotakis,et al.  Diffusion-assisted high-resolution direct femtosecond laser writing. , 2012, ACS nano.

[128]  C. Arnold,et al.  Impulsively actuated jets from thin liquid films for high-resolution printing applications , 2012, Journal of Fluid Mechanics.

[129]  A. Wokaun,et al.  Laser induced forward transfer aluminum layers: Process investigation by time resolved imaging , 2012 .

[130]  Anne-Patricia Alloncle,et al.  Time-resolved shadowgraph imaging of femtosecond laser-induced forward transfer of solid materials , 2012 .

[131]  Jenni E. Koskela,et al.  Two‐photon microfabrication of poly(ethylene glycol) diacrylate and a novel biodegradable photopolymer—comparison of processability for biomedical applications , 2012 .

[132]  B N Chichkov,et al.  Two-photon polymerization-generated and micromolding-replicated 3D scaffolds for peripheral neural tissue engineering applications , 2012, Biofabrication.

[133]  Changxue Xu,et al.  Effects of fluid properties and laser fluence on jet formation during laser direct writing of glycerol solution , 2012 .

[134]  G. Settles,et al.  Schlieren and Shadowgraph Techniques : Visualizing Phenomena in Transparent Media , 2012 .

[135]  In-situ local temperature measurement during three-dimensional direct laser writing , 2013 .

[136]  Thomas Lippert,et al.  Shadowgraphic investigations into the laser-induced forward transfer of different SnO2 precursor films , 2013 .

[137]  Droplet ejection in laser-induced forward transfer: mechanism for droplet fragmentation , 2013 .

[138]  Michael Schmidt,et al.  Generation of transparent conductive electrodes by laser consolidation of LIFT printed ITO nanoparticle layers , 2013 .

[139]  P. Vogt,et al.  Tissue Engineered Skin Substitutes Created by Laser-Assisted Bioprinting Form Skin-Like Structures in the Dorsal Skin Fold Chamber in Mice , 2013, PloS one.

[140]  Aleksandr Ovsianikov,et al.  Hydrogels for Two‐Photon Polymerization: A Toolbox for Mimicking the Extracellular Matrix , 2013 .

[141]  J. Fischer,et al.  Three-dimensional multi-photon direct laser writing with variable repetition rate. , 2013, Optics express.

[142]  Alternative technology concepts for low-cost and high-speed 2D and 3D interconnect manufacturing , 2013 .

[143]  Martin Wegener,et al.  Dip-in depletion optical lithography of three-dimensional chiral polarizers. , 2013, Optics letters.

[144]  Imaging of copper ejection in pico- and nanosecond laser induced forward transfer , 2013 .

[145]  Alexander K. Nguyen,et al.  Two-photon polymerization of polyethylene glycol diacrylate scaffolds with riboflavin and triethanolamine used as a water-soluble photoinitiator. , 2013, Regenerative medicine.

[146]  Pedro L Granja,et al.  Advanced biofabrication strategies for skin regeneration and repair. , 2013, Nanomedicine.

[147]  P Balling,et al.  Femtosecond-laser ablation dynamics of dielectrics: basics and applications for thin films , 2013, Reports on progress in physics. Physical Society.

[148]  Boris N. Chichkov,et al.  High-aspect 3D two-photon polymerization structuring with widened objective working range (WOW-2PP) , 2013, Light: Science & Applications.

[149]  Aleksandr Ovsianikov,et al.  Laser photofabrication of cell-containing hydrogel constructs. , 2014, Langmuir : the ACS journal of surfaces and colloids.

[150]  Sabrina Schlie-Wolter,et al.  Hyaluronic acid based materials for scaffolding via two-photon polymerization. , 2014, Biomacromolecules.

[151]  Hao Zeng,et al.  High‐Resolution 3D Direct Laser Writing for Liquid‐Crystalline Elastomer Microstructures , 2014, Advanced materials.

[152]  S. Hengsbach,et al.  Direct laser writing of auxetic structures: present capabilities and challenges , 2014 .

[153]  Hybrid Micro-stereo-lithography by Means of Aerosol Jet Printing Technology , 2014 .

[154]  Claas Willem Visser.  Fundamentals and applications of fast micro-drop impact , 2014 .

[155]  Ioanna Zergioti,et al.  Laser-induced forward transfer of silver nanoparticle ink: time-resolved imaging of the jetting dynamics and correlation with the printing quality , 2013, Microfluidics and Nanofluidics.

[156]  Alexander K. Nguyen,et al.  Two-photon polymerization of 3-D zirconium oxide hybrid scaffolds for long-term stem cell growth. , 2014, Biointerphases.

[157]  Hans Joachim Eichler,et al.  Femtosecond-laser induced ablation of silicate glasses and the intrinsic dissociation energy , 2014 .

[158]  Martin Wegener,et al.  Polymerization Kinetics in Three‐Dimensional Direct Laser Writing , 2014, Advanced materials.

[159]  In-situ measurement of the intrinsic polymerization time during three-dimensional direct laser writing , 2014, 2014 Conference on Lasers and Electro-Optics (CLEO) - Laser Science to Photonic Applications.

[160]  T. Klar,et al.  Sub-Abbe resolution: from STED microscopy to STED lithography , 2014 .

[161]  R. Pohl,et al.  Solid-phase laser-induced forward transfer of variable shapes using a liquid-crystal spatial light modulator , 2015, Applied Physics A.

[162]  Early-time free-surface flow driven by a deforming boundary , 2013, Journal of Fluid Mechanics.

[163]  C. Arnold,et al.  Tilting of adjacent laser-induced liquid jets , 2015 .