论文信息 - WORKSPACE MEASURING AND POSITIONING SYSTEM BASED ON ROTATING LASER PLANES

WORKSPACE MEASURING AND POSITIONING SYSTEM BASED ON ROTATING LASER PLANES

This paper introduces a novle type of large-scale coordinate measurement system by the name of wMPS (workspace Measurement and Positioning System), which is based on scanning planar laser beams and multiderection positioning. wMPS provides a novel technical solution for large-scale coordinate precision measurement. System configuration of wMPS was represented and multiplane constraint mathematical model was established in global coordinate system to achieve positioning. Adjustment calibration method as the basis for measuring was described, as well as the setup process. At last, an actual measuring network using three transmitters was built up. The experiment results show that the overall accuracy of the system can be achieved within 0.1 mm at the range of 10 m and has a satisfactory stability. DOI: http://dx.doi.org/10.5755/j01.mech.18.1.1289

[1] Paul G. Maropoulos,et al. Recent developments in large-scale dimensional metrology , 2009 .

[2] Luca Mastrogiacomo,et al. Sources of variability in the set-up of an indoor GPS , 2010, Int. J. Comput. Integr. Manuf..

[3] P. Maropoulos,et al. Study of the uncertainty of angle measurement for a rotary-laser automatic theodolite (R-LAT) , 2009 .

[4] Fiorenzo Franceschini,et al. Indoor GPS: system functionality and initial performance evaluation , 2008, Int. J. Manuf. Res..

[5] Andrew W. Fitzgibbon,et al. Bundle Adjustment - A Modern Synthesis , 1999, Workshop on Vision Algorithms.

[6] Manolis I. A. Lourakis,et al. SBA: A software package for generic sparse bundle adjustment , 2009, TOMS.

[7] C.Read Predmore,et al. Bundle adjustment of multi-position measurements using the Mahalanobis distance , 2010 .

[8] Yang,et al. Novel Method for Spatial Angle Measurement Based on Rotating Planar Laser Beams , 2010 .