A fully coupled numerical simulation of a hybrid concentrated photovoltaic/thermal system that employs a therminol VP-1 based nanofluid as a spectral beam filter

The realistic numerical modelling of multiphysics applications is an efficient way to precisely predict the operation of concentrated solar systems. Although many multiphysics conjugating approaches have been proposed in the literature, it is difficult to adopt such methods into simulating complex concentrated solar technologies. Consequently, this study introduces a novel 2D:3D numerical optical, thermal and electric coupling approach for a hybrid compound parabolic concentrator photovoltaic/thermal (CPC-PV/T) collector using a nanofluid as a spectral beam filter. In this approach, the volumetric absorbed radiation in each component of the system obtained from the non-gray 2D model is patched into the 3D model as a volumetric heat source using sophisticated computational tools. The main features of the full coupling method (FCM) are extensively analyzed and compared with the other two coupling methods previously adopted. Further, the module performance has been investigated employing both the nanofluid and base-fluid spectrum filters (BF-filter) compared with a stand-alone concentrated PV cell. From findings, the FCM can be applied to reveal more realistic operation characteristics of the proposed system compared with the other approaches, since the FCM can take into account the non-uniformity of solar illumination and the direction of reflected solar beams upon the receiver, along with the variation in the optical characteristics of utilized materials over the solar irradiance. Additionally, suspending indium tin oxide (ITO) nanoparticles into the Therminol VP1 oil raises the absorption rate over the thermal-bands with 62.5% higher than the use of BF-filter, whilst the cell temperature and the transmitted irradiance within the PV-band are obviously declined.

[1]  G. Fang,et al.  Numerical study of a novel miniature compound parabolic concentrating photovoltaic/thermal collector with microencapsulated phase change slurry , 2017 .

[2]  Vahid Madadi Avargani,et al.  A novel optical-thermal modeling of a parabolic dish collector with a helically baffled cylindrical cavity receiver , 2019, Energy.

[3]  Eduardo F. Fernández,et al.  Conceptual design and performance evaluation of a hybrid concentrating photovoltaic system in preparation for energy , 2017 .

[4]  R. Saidur,et al.  A review on recent development for the design and packaging of hybrid photovoltaic/thermal (PV/T) solar systems , 2018, Renewable and Sustainable Energy Reviews.

[5]  Jun Li,et al.  Performance analysis of nanofluid-based spectral splitting PV/T system in combined heating and power application , 2018 .

[6]  A. Tripathy,et al.  Structural analysis of absorber tube used in parabolic trough solar collector and effect of materials on its bending: A computational study , 2018 .

[7]  Mostafa M. Abd El-Samie,et al.  Numerical study of a photovoltaic/thermal hybrid system with nanofluid based spectral beam filters , 2018, Energy Conversion and Management.

[8]  J. Meyer,et al.  Heat transfer and thermodynamic performance of a parabolic trough receiver with centrally placed perforated plate inserts , 2014 .

[9]  Todd Otanicar,et al.  Optical Properties of Colloidal Indium Tin Oxide Suspended in a Thermal Fluid , 2018 .

[10]  Josua P. Meyer,et al.  Finite-volume ray tracing using Computational Fluid Dynamics in linear focus CSP applications , 2016 .

[11]  I. Del Villar,et al.  Experimental demonstration of lossy mode and surface plasmon resonance generation with Kretschmann configuration. , 2015, Optics letters.

[12]  A. Ranjbar,et al.  Effect of using nanofluids on efficiency of parabolic trough collectors in solar thermal electric power plants , 2017 .

[13]  Martin A. Green,et al.  Self-consistent optical parameters of intrinsic silicon at 300 K including temperature coefficients , 2008 .

[14]  Robert A. Taylor,et al.  Nanofluid-based optical filter optimization for PV/T systems , 2012, Light: Science & Applications.

[15]  D. Jing,et al.  Investigation of the performance of photovoltaic/thermal system by a coupled TRNSYS and CFD simulation , 2017 .

[16]  Mostafa M. Abd El-Samie,et al.  Numerical study of a solar thermoelectric generator with nanofluids based microcooling system , 2018, Numerical Heat Transfer, Part A: Applications.

[17]  V. Everett,et al.  Spectral characterisation and long-term performance analysis of various commercial Heat Transfer Fluids (HTF) as Direct-Absorption Filters for CPV-T beam-splitting applications , 2014 .

[18]  S. Patankar,et al.  Finite volume method for radiation heat transfer , 1994 .

[19]  M. Green,et al.  Optical properties of intrinsic silicon at 300 K , 1995 .

[20]  E. Fernández,et al.  Fluid-based spectrally selective filters for direct immersed PVT solar systems in building applications , 2018, Renewable Energy.

[21]  J. Anderson,et al.  Governing Equations of Fluid Dynamics , 2009 .

[22]  G. V. Satyanarayana,et al.  Numerical Study of Porous Finned Receiver for Solar Parabolic Trough Concentrator , 2008 .

[23]  Ya-Ling He,et al.  Pore-scale numerical simulation of fully coupled heat transfer process in porous volumetric solar receiver , 2017 .

[24]  Ya-Ling He,et al.  A MCRT and FVM coupled simulation method for energy conversion process in parabolic trough solar collector , 2011 .

[25]  Vladimir V Tsukruk,et al.  Electrically tunable plasmonic behavior of nanocube-polymer nanomaterials induced by a redox-active electrochromic polymer. , 2014, ACS nano.

[26]  Ali Hakkaki-Fard,et al.  A numerical study of dust deposition effects on photovoltaic modules and photovoltaic-thermal systems , 2019, Renewable Energy.

[27]  Xing Ju,et al.  A novel rotational symmetry (RS) connection approach for dense-array concentrator photovoltaic (DA-CPV) modules , 2019, Energy Conversion and Management.

[28]  Ali K. Abdel Rahman,et al.  Performance investigation of low – Concentration photovoltaic systems under hot and arid conditions: Experimental and numerical results , 2016 .

[29]  R. T. Raj,et al.  Experimental and numerical analysis using CFD technique of the performance of the absorber tube of a solar parabolic trough collector with and without insertion , 2013, 2013 International Conference on Energy Efficient Technologies for Sustainability.

[30]  Mohamed I. Hassan,et al.  A Realistic Numerical Model of Lengthy Solar Thermal Receivers Used in Parabolic Trough CSP Plants , 2015 .

[31]  Saad Mekhilef,et al.  A cascade nanofluid-based PV/T system with optimized optical and thermal properties , 2016 .

[32]  Xiao Wei Zhu,et al.  Wavy-tape insert designed for managing highly concentrated solar energy on absorber tube of parabolic trough receiver , 2017 .

[33]  N. Sidik,et al.  Numerical Investigation of Direct Absorption Solar Collector using Nanofluids: A Review , 2019, IOP Conference Series: Materials Science and Engineering.

[34]  D. Del Col,et al.  Modelling of a direct absorption solar receiver using carbon based nanofluids under concentrated solar radiation , 2017, Renewable Energy.

[35]  Eduardo F. Fernández,et al.  Coupled Simulation of Performance of a Crossed Compound Parabolic Concentrator with Solar Cell , 2015 .

[36]  Xing Ju,et al.  A review of the concentrated photovoltaic/thermal (CPVT) hybrid solar systems based on the spectral beam splitting technology , 2017 .

[37]  Dai Liu,et al.  A numerical study on optical and thermodynamic characteristics of a spherical cavity receiver , 2019, Applied Thermal Engineering.

[38]  Yong Shuai,et al.  Thermal performance analysis of porous media receiver with concentrated solar irradiation , 2013 .

[39]  Drew DeJarnette,et al.  Experimental evaluation of a prototype hybrid CPV/T system utilizing a nanoparticle fluid absorber at elevated temperatures , 2018, Applied Energy.

[40]  T. Ma,et al.  Numerical investigation and parametric analysis of a photovoltaic thermal system integrated with phase change material , 2019, Applied Energy.

[41]  Guo Xinxin,et al.  Design and performance study of a low concentration photovoltaic‐thermal module , 2018 .

[42]  Matthias Winter,et al.  Numerical Modeling of c-Si PV Modules by Coupling the Semiconductor with the Thermal Conduction, Convection and Radiation Equations , 2015 .

[43]  Drew DeJarnette,et al.  Detailed performance model of a hybrid photovoltaic/thermal system utilizing selective spectral nanofluid absorption , 2018, Renewable Energy.

[44]  Elizabeth Thomsen,et al.  Spectral beam splitting for efficient conversion of solar energy - A review , 2013 .

[45]  Josua P. Meyer,et al.  A novel computational approach to combine the optical and thermal modelling of Linear Fresnel Collectors using the finite volume method , 2015 .

[46]  Robert A. Taylor,et al.  Nanofluid optical property characterization: towards efficient direct absorption solar collectors , 2011, Nanoscale research letters.

[47]  K. A. Antonopoulos,et al.  Optical and thermal investigation of a linear Fresnel collector with trapezoidal cavity receiver , 2018 .

[48]  Yuehong Su,et al.  Effect of non-uniform illumination and temperature distribution on concentrating solar cell - A review , 2018 .

[49]  Yao Zheng,et al.  Thermal performance analysis of a novel linear cavity receiver for parabolic trough solar collectors , 2019, Applied Energy.

[50]  Yun Cui,et al.  Study of Photovoltaic/Thermal Systems with MgO-Water Nanofluids Flowing over Silicon Solar Cells , 2012, 2012 Asia-Pacific Power and Energy Engineering Conference.

[51]  Ya-Ling He,et al.  Multi-physics analysis: The coupling effects of nanostructures on the low concentrated black silicon photovoltaic system performances , 2018 .

[52]  Xing Ju,et al.  Thermal and electrical performance of the dense-array concentrating photovoltaic (DA-CPV) system under non-uniform illumination , 2019, Applied Energy.

[53]  Tapas K. Mallick,et al.  Enhancing performance of a linear dielectric based concentrating photovoltaic system using a reflective film along the edge , 2014 .

[54]  David Jafrancesco,et al.  Optical simulation of a central receiver system: Comparison of different software tools , 2018, Renewable and Sustainable Energy Reviews.

[55]  Kun Wang,et al.  A detailed parameter study on the comprehensive characteristics and performance of a parabolic trough solar collector system , 2014 .

[56]  M. Rezapour,et al.  The Modeling of Constant/Variable Solar Heat Flux Into a Porous Coil With Concentrator , 2020, Journal of Solar Energy Engineering.

[57]  Wang Fuqiang,et al.  Heat transfer performance enhancement and thermal strain restrain of tube receiver for parabolic trough solar collector by using asymmetric outward convex corrugated tube , 2016 .

[58]  Xueye Chen,et al.  A review on modelling, simulation and experiment of thermal conductivity of nanofluids , 2019, International Journal of Environmental Analytical Chemistry.

[59]  T. Yagi,et al.  Thermal transport properties of polycrystalline tin-doped indium oxide films , 2009 .

[60]  Miqdam T. Chaichan,et al.  Photovoltaic/Thermal (PV/T) systems: Status and future prospects , 2017 .

[61]  M. Pinar Mengüç,et al.  Thermal Radiation Heat Transfer , 2020 .

[62]  Juan Xiao,et al.  Three-dimensional numerical study of heat transfer characteristics in the receiver tube of parabolic trough solar collector , 2010 .

[63]  Ali Akbar Ranjbar,et al.  Numerical thermal study on effect of porous rings on performance of solar parabolic trough collector , 2017 .

[64]  Guo Xinxin,et al.  Numerical simulation and experimental analysis of an LCPV/T system under real operating conditions , 2019, Journal of Cleaner Production.

[65]  Yong Shuai,et al.  Ray-Thermal-Structural Coupled Analysis of Parabolic Trough Solar Collector System , 2010 .

[66]  Liejin Guo,et al.  Preparation of highly dispersed nanofluid and CFD study of its utilization in a concentrating PV/T system , 2015 .

[67]  Heng Zhang,et al.  Experimental and Simulation Studies on A Novel Compound Parabolic Concentrator , 2017 .

[68]  M. Imtiaz Hussain,et al.  Nanofluid-Powered Dual-Fluid Photovoltaic/Thermal (PV/T) System: Comparative Numerical Study , 2019, Energies.

[69]  Hameed B. Mahood,et al.  Modeling and experimental validation of a PVT system using nanofluid coolant and nano-PCM , 2019, Solar Energy.

[70]  Mostafa M. Abd El-Samie,et al.  Theoretical investigation of different CPVT configurations based on liquid absorption spectral beam filter , 2019 .

[71]  Shafiqur Rehman,et al.  Experimental and numerical study on non-concentrating and symmetric unglazed compound parabolic photovoltaic concentration systems , 2014 .

[72]  Mohammad Passandideh-Fard,et al.  Optimization and parametric analysis of a nanofluid based photovoltaic thermal system: 3D numerical model with experimental validation , 2018 .

[73]  Tie Li,et al.  Study on the radiation flux and temperature distributions of the concentrator–receiver system in a solar dish/Stirling power facility , 2011 .

[74]  R. Dizène,et al.  Optical, 2D thermal modeling and exergy analysis applied for performance prediction of a solar PTC , 2018, Solar Energy.

[75]  Xing Ju,et al.  Three-dimensional numerical investigation of a hybrid low concentrated photovoltaic/thermal system , 2020, Energy.

[76]  S. Mitchell,et al.  Modelling the efficiency of a nanofluid-based direct absorption parabolic trough solar collector , 2018 .

[77]  Shi-jun You,et al.  Heat transfer analysis of a new volumetric based receiver for parabolic trough solar collector , 2018 .

[78]  T. Kodama,et al.  Conjugate radiation-convection-conduction simulation of volumetric solar receivers with cut-back inlets , 2018 .

[79]  E. Papanicolaou,et al.  Numerical simulations of a parabolic trough solar collector with nanofluid using a two-phase model , 2016 .

[80]  J. I. Rosell,et al.  Optical performance of solar reflective concentrators: A simple method for optical assessment , 2013 .

[81]  Ali Akbar Ranjbar,et al.  Thermal performance analysis of solar parabolic trough collector using nanofluid as working fluid: A CFD modelling study , 2016 .

[82]  J. Meyer,et al.  Combining ray tracing and CFD in the thermal analysis of a parabolic dish tubular cavity receiver , 2016 .

[83]  Robert A. Taylor,et al.  A review of nanofluid-based direct absorption solar collectors: Design considerations and experiments with hybrid PV/Thermal and direct steam generation collectors , 2020 .

[84]  Rahman Saidur,et al.  A comprehensive review of state-of-the-art concentrating solar power (CSP) technologies: Current status and research trends , 2018, Renewable and Sustainable Energy Reviews.

[85]  Xungang Diao,et al.  A numerical study of parabolic trough receiver with nonuniform heat flux and helical screw-tape inserts , 2014 .

[86]  Taher S. Maatallah,et al.  Simulation and performance analysis of concentrating photovoltaic/thermal collector (CPV/T) with three-sided thermal insulation based on coupled optothermal model , 2019, Solar Energy.

[87]  Yongliang Li,et al.  Numerical study on energy and exergy performances of a microencapsulated phase change material slurry based photovoltaic/thermal module , 2019, Energy Conversion and Management.

[88]  Zhifeng Wang,et al.  Three-dimensional numerical study of heat transfer characteristics of parabolic trough receiver , 2014 .

[89]  Josua P. Meyer,et al.  Minimum entropy generation due to heat transfer and fluid friction in a parabolic trough receiver with non-uniform heat flux at different rim angles and concentration ratios , 2014 .

[90]  K. R. Kumar,et al.  Thermal analysis of solar parabolic trough with porous disc receiver , 2009 .

[91]  Liang Kai,et al.  Research on the Performance of Flat-box PV/T Collector with Cooling Channels , 2018 .