An analysis of strain localization and formation of face wrinkles in edge-wise loaded corrugated sandwich panels using a continuum damage model

This paper examines the compressive failure mechanism in edge-to-edge loaded corrugated sandwich panels. The formation of face wrinkles is specifically considered. A detailed finite element model o ...

[1]  Z. Bažant,et al.  Nonlocal damage theory , 1987 .

[2]  Leif A. Carlsson,et al.  Measuring thickness changes of edgewise compression loaded corrugated board panels using digital image correlation , 2012 .

[3]  C. Bert,et al.  The behavior of structures composed of composite materials , 1986 .

[4]  E. Kröner,et al.  Elasticity theory of materials with long range cohesive forces , 1967 .

[5]  Qingxi Xia.  Mechanics of inelastic deformation and delamination in paperboard , 2002 .

[6]  Pierre J. J. Dumont,et al.  Analytical post-buckling model of corrugated board panels using digital image correlation measurements , 2013 .

[7]  Marco Evangelos Biancolini,et al.  Numerical and experimental investigation of the strength of corrugated board packages , 2003 .

[8]  Mgd Marc Geers,et al.  Experimental analysis and computational modelling of damage and fracture , 1997 .

[9]  R. Hägglund,et al.  Structural effects on deformation and fracture of random fiber networks and consequences on continuum models , 2009 .

[10]  George Z. Voyiadjis,et al.  On the coupling of anisotropic damage and plasticity models for ductile materials , 2003 .

[11]  Leif A. Carlsson,et al.  Modeling of global and local buckling of corrugated board panels loaded in edge-to-edge compression , 2014 .

[12]  Hans Muhlhaus,et al.  A variational principle for gradient plasticity , 1991 .

[13]  Poorvi Patel,et al.  Local buckling and collapse of corrugated board under biaxial stress , 1997 .

[14]  R. de Borst,et al.  A new framework in nonlocal mechanics , 2000 .

[15]  E. Aifantis.  On the gradient approach - Relation to Eringen's nonlocal theory , 2011 .

[16]  Claudia Comi,et al.  A non-local model with tension and compression damage mechanisms , 2001 .

[17]  Three-dimensional flaw identification using inverse analysis , 1996 .

[18]  A. Eringen,et al.  Nonlocal Continuum Field Theories , 2002 .

[19]  Gary A. Baum,et al.  Elastic properties, paper quality, and process control , 1986 .

[20]  A. Needleman.  Material rate dependence and mesh sensitivity in localization problems , 1988 .

[21]  W. Peters,et al.  Digital Imaging Techniques In Experimental Stress Analysis , 1982 .

[22]  Tomas Nordstrand.  Analysis and testing of corrugated board panels into the post-buckling regime , 2004 .

[23]  T. Belytschko,et al.  Localization limiters in transient problems , 1988 .

[24]  Hui Huang,et al.  A simplified material model for finite element analysis of paperboard creasing , 2010 .

[25]  A. Eringen,et al.  On nonlocal elasticity , 1972 .

[26]  Mgd Marc Geers,et al.  Gradient‐enhanced damage modelling of high‐cycle fatigue , 2000 .

[27]  E. Aifantis,et al.  On Some Aspects in the Special Theory of Gradient Elasticity , 1997 .

[28]  K. Bathe.  Finite Element Procedures , 1995 .

[29]  Per Isaksson,et al.  A mechanical model of damage and delamination in corrugated board during folding , 2005 .

[30]  Rhj Ron Peerlings,et al.  Gradient enhanced damage for quasi-brittle materials , 1996 .