Pounding of adjacent superstructure segments in elevated bridges during severe earthquakes can result in significant structural damage. The aim of this paper is to analyse several methods of reduction of the negative effects of collisions induced by the seismic wave propagation effect. The analysis is conducted on a detailed three-dimensional structural component model of an isolated highway bridge. The results show that the influence of pounding on the structural response is significant in the longitudinal direction of the bridge and significantly depends on the gap size between superstructure segments. The smallest response can be obtained for very small gap sizes and for gap sizes large enough to prevent pounding. Further analysis indicates that the bridge behaviour can be effectively improved by placing hard rubber bumpers between segments and by stiff linking the segments one with another. The experimental results show that, for the practical application of such connectors, shock transmission units can be used. Copyright © 2000 John Wiley & Sons, Ltd.
[1]
Praveen K. Malhotra,et al.
Seismic interaction at separation joints of an instrumented concrete bridge
,
1995
.
[2]
Krzysztof Wilde,et al.
Pounding of superstructure segments in isolated elevated bridge during earthquakes
,
1998
.
[3]
B P Pritchard.
THE USE OF SHOCK TRANSMISSION UNITS IN BRIDGING.
,
1996
.
[4]
Mjn Priestley,et al.
Seismic Design and Retrofit of Bridges
,
1996
.
[5]
James M. Kelly,et al.
Earthquake-Resistant Design with Rubber
,
1993
.
[6]
Kazuhiko Kasai,et al.
SPECTRAL RELATIVE MOTION OF TWO STRUCTURES DUE TO SEISMIC TRAVEL WAVES
,
1996
.
[7]
Jeffrey L. Western,et al.
Guidelines for structural bolting in accordance with the AISC (American Institute of Steel Construction) ninth edition Manual of Steel Construction
,
1990
.