Design specifications of direct borohydride–hydrogen peroxide fuel cell system for space missions

Abstract The design specifications of a direct borohydride–hydrogen peroxide fuel cell (DBPFC) system for space missions were determined based on the energy density. A unit cell test of the DBPFC with electrocatalysts supported on multiwalled carbon nanotubes was conducted to evaluate the DBPFC performance. A relationship between the current density and voltage was obtained from the test results to estimate the total mass and energy density of the DBPFC system. The effects of changing the voltage efficiency and fuel concentrations on the total mass of the DBPFC system were investigated to determine the appropriate design specifications for space missions. When the voltage efficiency was 35%, the system mass was the lowest, regardless of the fuel concentrations. Finally, the energy density of the DBPFC system operating at the optimum voltage efficiency was calculated at various fuel concentrations. When the NaBH4 and H2O2 concentrations are higher than 20 and 65 wt%, respectively, the energy density (>400 Wh/kg) of the DBPFC system is higher than those of other power sources and the DBPFC system can be widely used for space missions.

[1]  Sejin Kwon,et al.  Fuel cell system with sodium borohydride as hydrogen source for unmanned aerial vehicles , 2011 .

[2]  Frank Holcomb,et al.  Hydrogen-Peroxide-Based Fuel Cells for Space Power Systems , 2008 .

[3]  Xianyou Wang,et al.  Enhanced activity of Au–Fe/C anodic electrocatalyst for direct borohydride-hydrogen peroxide fuel cell , 2015 .

[4]  James Larminie,et al.  Fuel Cell Systems Explained , 2000 .

[5]  Grant M. Kopec,et al.  Water Management Issues for Direct Borohydride/Peroxide Fuel Cells , 2010 .

[6]  A. K. Shukla,et al.  A High Output Voltage Direct Borohydride Fuel Cell , 2004 .

[7]  Sungyong An,et al.  Chugging Instability of H2O2 Monopropellant Thrusters with Catalyst Reactivity and Support Sizes , 2011 .

[8]  Sejin Kwon,et al.  Sodium borohydride hydrogen generator using Co–P/Ni foam catalysts for 200 W proton exchange membrane fuel cell system , 2015 .

[10]  Sejin Kwon,et al.  Performance evaluation of direct borohydride–hydrogen peroxide fuel cells with electrocatalysts supported on multiwalled carbon nanotubes , 2014 .

[11]  C. Sequeira,et al.  Electrocatalytic performance of Pt–Dy alloys for direct borohydride fuel cells , 2014 .

[12]  Hong Wang,et al.  Performance of supported Au-Co alloy as the anode catalyst of direct borohydride-hydrogen peroxide fuel cell , 2010 .

[13]  Rodney L. Burton,et al.  NaBH4/H2O2 fuel cells for air independent power systems , 2008 .

[14]  Sejin Kwon,et al.  Effect of heat treatment of electrodes on direct borohydride-hydrogen peroxide fuel cell performance , 2014 .

[15]  Benan Hu,et al.  Studies of electrochemical performance of carbon supported Pt–Cu nanoparticles as anode catalysts for direct borohydride–hydrogen peroxide fuel cell , 2011 .

[16]  R. Buchheit,et al.  Performance Study of Direct Borohydride Fuel Cells Employing Polyvinyl Alcohol Hydrogel Membrane and Nickel‐Based Anode , 2011 .

[17]  Suk Woo Nam,et al.  Development of a continuous hydrogen generator fueled by ammonia borane for portable fuel cell applications , 2013 .

[18]  Sejin Kwon,et al.  Lightweight Magnesium Bipolar Plates of Direct NaBH4/H2O2 Fuel Cell for AIP Application , 2015 .

[19]  Wenhua Zuo,et al.  Fabrication and Shell Optimization of Synergistic TiO2‐MoO3 Core–Shell Nanowire Array Anode for High Energy and Power Density Lithium‐Ion Batteries , 2015 .

[20]  Jongkwang Lee,et al.  Micro space power system using MEMS fuel cell for nano-satellites , 2014 .

[21]  D. Duan,et al.  Anodic behavior of carbon supported Cu@Ag core–shell nanocatalysts in direct borohydride fuel cells , 2015 .

[22]  George H. Miley,et al.  Cathode electrocatalyst selection and deposition for a direct borohydride/hydrogen peroxide fuel cell , 2007 .

[23]  Guiling Wang,et al.  A direct NaBH4-H2O2 fuel cell using Ni foam supported Au nanoparticles as electrodes , 2010 .

[24]  Sridhar Parthasarathi,et al.  A Self-Supported Direct Borohydride-Hydrogen Peroxide Fuel Cell System , 2009 .

[25]  Xingyan Wang,et al.  Carbon-supported Pt–Co nanoparticles as anode catalyst for direct borohydride-hydrogen peroxide fuel cell: Electrocatalysis and fuel cell performance , 2012 .

[26]  Sejin Kwon,et al.  Estimating the energy density of direct borohydride–hydrogen peroxide fuel cell systems for air-independent propulsion applications , 2015 .

[27]  Sejin Kwon,et al.  Simple catalyst bed sizing of a NaBH4 hydrogen generator with fast startup for small unmanned aerial vehicles , 2016 .

[28]  F. Walsh,et al.  A direct borohydride–peroxide fuel cell using a Pd/Ir alloy coated microfibrous carbon cathode , 2008 .

[29]  Jianguo Liu,et al.  Direct NaBH4–H2O2 fuel cell based on nanoporous gold leaves , 2013 .

[30]  Chul B. Park,et al.  Design specifications of H2O2/kerosene bipropellant rocket system for space missions , 2014 .

[31]  Yunfeng Song,et al.  Carbon supported palladium hollow nanospheres as anode catalysts for direct borohydride-hydrogen peroxide fuel cells , 2012 .

[32]  George Tsatsaronis,et al.  Exergoeconomic analysis of vehicular PEM (proton exchange membrane) fuel cell systems with and without expander , 2014 .

[33]  A. Shukla,et al.  A Direct Borohydride/Hydrogen Peroxide Fuel Cell with Reduced Alkali Crossover , 2007 .

[34]  Suk Woo Nam,et al.  Development of a 600 W Proton Exchange Membrane Fuel Cell Power System for the Hazardous Mission Robot , 2010 .

[35]  Frank Holcomb,et al.  Engineering of the bipolar stack of a direct NaBH4 fuel cell , 2008 .

[36]  Sejin Kwon,et al.  Autoignitable and Restartable Hybrid Rockets Using Catalytic Decomposition of an Oxidizer , 2014 .

[37]  Ying Wang,et al.  Carbon-Supported Au Hollow Nanospheres as Anode Catalysts for Direct Borohydride−Hydrogen Peroxide Fuel Cells , 2009 .

[38]  Guiling Wang,et al.  An alkaline direct NaBH4–H2O2 fuel cell with high power density , 2009 .

[39]  A. Shukla,et al.  Electro-reduction of hydrogen peroxide on iron tetramethoxy phenyl porphyrin and lead sulfate electrodes with application in direct borohydride fuel cells , 2005 .

[40]  Frano Barbir,et al.  PEM Fuel Cells: Theory and Practice , 2012 .

[41]  Sejin Kwon,et al.  Design and Validation of a Liquid Film-Cooled Hydrogen Peroxide/Kerosene Bipropellant Thruster , 2015 .

[42]  Karen E. Swider-Lyons,et al.  A calibrated hydrogen-peroxide direct-borohydride fuel cell model , 2014 .

[43]  Qinglan Zhao,et al.  Investigation of nanoporous carbon supported palladium–zinc nanocomposites as anode catalysts for direct borohydride–hydrogen peroxide fuel cell , 2015 .

[44]  L. Zhixiang,et al.  Influence of operation conditions on direct NaBH4/H2O2 fuel cell performance , 2010 .

[45]  Sungyong An,et al.  Chugging Instability of H2O2 Monopropellant Thrusters with Reactor Aspect Ratio and Pressures , 2011 .

[46]  S. Pitchumani,et al.  A direct borohydride fuel cell employing Prussian Blue as mediated electron-transfer hydrogen peroxide reduction catalyst , 2008 .

[47]  G. Jackson,et al.  Modeling the performance of an ideal NaBH 4 –H 2 O 2 direct borohydride fuel cell , 2014 .

[48]  D. Duan,et al.  The effective carbon supported core–shell structure of Ni@Au catalysts for electro-oxidation of borohydride , 2015 .

[49]  Sejin Kwon,et al.  Electrocatalysts supported on multiwalled carbon nanotubes for direct borohydride–hydrogen peroxide fuel cell , 2014 .

[50]  Dimitri N. Mavris,et al.  Development and experimental characterization of a fuel cell powered aircraft , 2007 .

[51]  Hong Wang,et al.  Carbon supported Pt hollow nanospheres as anode catalysts for direct borohydride-hydrogen peroxide f , 2011 .

[52]  A. K. Shukla,et al.  An alkaline direct borohydride fuel cell with hydrogen peroxide as oxidant , 2005 .

[53]  D. Duan,et al.  Carbon supported Cu-Pd nanoparticles as anode catalyst for direct borohydride-hydrogen peroxide fuel cells , 2015 .

[54]  Sejin Kwon,et al.  Transient behavior of proton exchange membrane fuel cells over a cobalt–phosphorous/nickel foam catalyst with sodium borohydride , 2016 .

[55]  Xianyou Wang,et al.  Carbon supported Pt–Sn nanoparticles as anode catalyst for direct borohydride–hydrogen peroxide fuel cell: Electrocatalysis and fuel cell performance , 2013 .

[56]  Yoshitsugu Sone,et al.  A 100-W class regenerative fuel cell system for lunar and planetary missions , 2011 .

[57]  Yong Lei,et al.  Large-scale highly ordered Sb nanorod array anodes with high capacity and rate capability for sodium-ion batteries , 2015 .

[58]  David L. Carroll,et al.  Direct NaBH4/H2O2 fuel cells , 2007 .

[59]  Yunfeng Song,et al.  High activity of Au–Cu/C electrocatalyst as anodic catalyst for direct borohydride-hydrogen peroxide fuel cell , 2011 .

[60]  Kai Xi,et al.  Nitrogen, sulfur-codoped graphene sponge as electroactive carbon interlayer for high-energy and -power lithium–sulfur batteries , 2016 .

[61]  César A.C. Sequeira,et al.  Direct borohydride/peroxide fuel cells using Prussian Blue cathodes , 2012 .

[62]  C. Sequeira,et al.  Perovskite cathodes for NaBH4/H2O2 direct fuel cells , 2015 .

[63]  C. Ponce de León,et al.  A direct borohydride—Acid peroxide fuel cell , 2007 .

[64]  B. Liu,et al.  Solid sodium borohydride as a hydrogen source for fuel cells , 2009 .

[65]  Shinjae Kang,et al.  Lanthanum doping for longevity of alumina catalyst bed in hydrogen peroxide thruster , 2015 .

[66]  R. O’Hayre,et al.  Fuel Cell Fundamentals , 2005 .

[67]  Taegyu Kim,et al.  NaBH4 (sodium borohydride) hydrogen generator with a volume-exchange fuel tank for small unmanned aerial vehicles powered by a PEM (proton exchange membrane) fuel cell , 2014 .

[68]  Yan Zhang,et al.  Modeling and control of a portable proton exchange membrane fuel cell–battery power system , 2011 .

[69]  A. Shukla,et al.  A 28-W portable direct borohydride–hydrogen peroxide fuel-cell stack , 2006 .

[70]  Teresa J. Leo,et al.  Exergy analysis of PEM fuel cells for marine applications , 2010 .

[71]  Sejin Kwon,et al.  Demonstration of 500 N scale bipropellant thruster using non-toxic hypergolic fuel and hydrogen peroxide , 2016 .

[72]  R. Buchheit,et al.  Direct borohydride fuel cell using Ni-based composite anodes , 2010 .

[73]  Hong Wang,et al.  Investigation of carbon supported Au–Ni bimetallic nanoparticles as electrocatalyst for direct borohydride fuel cell , 2011 .

[74]  Sejin Kwon,et al.  Design and development of a fuel cell-powered small unmanned aircraft , 2012 .