Structural behaviour of concrete columns under natural fires

Purpose – The paper aims to give an insight into the behaviour of reinforced concrete columns during and after the cooling phase of a fire. The study is based on numerical simulations as these tools are frequently used in structural engineering. As the reliability of numerical analysis largely depends on the validity of the constitutive models, the development of a concrete model suitable for natural fire analysis is addressed in the study.Design/methodology/approach – The paper proposes theoretical considerations supported by numerical examples to discuss the capabilities and limitations of different classes of concrete models and eventually to develop a new concrete model that meets the requirements in case of natural fire analysis. Then, the study performs numerical simulations of concrete columns subjected to natural fire using the new concrete model. A parametric analysis allows for determining the main factors that affect the structural behaviour in cooling.Findings – Failure of concrete columns dur...

[1]  Gabriel A. Khoury,et al.  Transient thermal strain of concrete: literature review, conditions within specimen and behaviour of individual constituents , 1985 .

[2]  Jean-Marc Franssen,et al.  Consideration of Transient Creep in the Eurocode Constitutive Model for Concrete in the Fire situation , 2010 .

[3]  B. Schrefler,et al.  Thermo‐hydro‐mechanical modelling of high performance concrete at high temperatures , 2002 .

[4]  Jean-Marc Franssen,et al.  SAFIR. A thermal/structural program modelling structures under fire , 2003 .

[5]  Jui-Hsiang Hsu,et al.  Effect of Fire on the Residual Mechanical Properties and Structural Performance of Reinforced Concrete Beams , 2008 .

[6]  John Purkiss,et al.  Fire Safety Engineering Design of Structures , 1996 .

[7]  Jean-Marc Franssen,et al.  A Comparison Between Explicit and Implicit Modelling of Transient Creep Strain in Concrete Uniaxial Constitutive Relationships , 2011 .

[8]  R. Felicetti,et al.  Thermal diffusivity and residual strength of high-performance light-weight concrete exposed to high temperature , 2002 .

[9]  Martin Gillie,et al.  Load Induced Thermal Strains, Implications for Structural Behaviour , 2008 .

[10]  S. Thelandersson,et al.  Stress and Deformation Characteristics of Concrete at High Temperatures. 2. Experimental Investigation and Material Behaviour Model , 1976 .

[11]  Jose L. Torero,et al.  Behaviour of concrete structures in fire , 2007 .

[12]  Jean-Marc Franssen,et al.  Test Results and Model for the Residual Compressive Strength of Concrete After a Fire , 2011 .

[13]  Long-yuan Li,et al.  Stress-strain constitutive equations of concrete material at elevated temperatures , 2005 .

[14]  Bo Wu,et al.  Effect of Heating and Cooling on Axially Restrained RC Columns with Special-Shaped Cross Section , 2009 .

[15]  Brian J. Meacham,et al.  Performance-Based Fire Safety Engineering: an Introduction of Basic Concepts , 1995 .

[16]  Mohamad J. Terro,et al.  Numerical Modeling of the Behavior of Concrete Structures in Fire , 1998 .

[17]  Thomas Gernay,et al.  Effect of Transient Creep Strain Model on the Behavior of Concrete Columns Subjected to Heating and Cooling , 2012 .

[18]  Jean-Marc Franssen,et al.  A formulation of the Eurocode 2 concrete model at elevated temperature that includes an explicit term for transient creep , 2012 .

[19]  Chanakya Arya,et al.  Buckling resistance of unstiffened webs , 2009 .

[20]  Jean-Marc Franssen,et al.  Collapse of concrete columns during and after the cooling phase of a fire , 2011 .