What is the most suitable fixed grid solidification method for handling time-varying inverse Stefan problems in high temperature industrial furnaces?

[1]  Prediction of the phase change front using the optimization technique , 1985 .

[2]  V. Voller,et al.  ERAL SOURCE-BASED METHOD FOR SOLIDIFICATION PHASE CHANGE , 1991 .

[3]  V. Voller,et al.  A general enthalpy method for modeling solidification processes , 1992 .

[4]  C. Bénard,et al.  Inverse Stefan problem : tracking of the interface position from measurements on the solid phase , 1992 .

[5]  K. Woodbury,et al.  Redundant data and future times in the inverse heat conduction problem , 1996 .

[6]  Barry J. Welch,et al.  Modelling of dynamic ledge heat transfer , 1997 .

[7]  M. Raynaud,et al.  A guide for the use of the function specification method for 2D inverse heat conduction problems , 1998 .

[8]  K. Momose,et al.  An inverse analysis of two-phase Stefan problems using imaginary heat sources , 1998 .

[9]  H. Liang,et al.  Tracking of a moving interface during a 2D melting or solidification process from measurements on the solid part only , 2000, Proceedings of the 3rd World Congress on Intelligent Control and Automation (Cat. No.00EX393).

[10]  Prediction of the Inner Wall Shape of an Eroded Furnace by the Nonlinear Inverse Heat Conduction Technique , 2000 .

[11]  M. N. Özişik,et al.  Inverse Heat Transfer: Fundamentals and Applications , 2000 .

[12]  Marcel Lacroix,et al.  Prediction of protective banks in high temperature smelting furnaces by inverse heat transfer , 2006 .

[13]  Chin-Ru Su,et al.  Inverse estimation for temperatures of outer surface and geometry of inner surface of furnace with two layer walls , 2008 .

[14]  Mohammad Eghtesad,et al.  Two-Dimensional Inverse Heat Transfer Analysis of Functionally Graded Materials in Estimating Time-Dependent Surface Heat Flux , 2008 .

[15]  Marcel Lacroix,et al.  Fast inverse prediction of phase change banks in high temperature furnaces with a Kalman filter coupled with a recursive least-square estimator , 2010 .

[16]  Jacek Smolka,et al.  An effective 3-D inverse procedure to retrieve cooling conditions in an aluminium alloy continuous casting problem , 2010 .

[17]  H. Tabrizi,et al.  Effect of Sensor Locations on the Solution of Inverse Stefan Problems , 2010 .

[18]  E. Majchrzak,et al.  Sensitivity Analysis as a Tool of Optimal Sensors Location for Solidification Parameters Estimation , 2010 .

[19]  B. Dennis,et al.  Inverse Determination of Eroded Smelter Wall Thickness Variation Using an Elastic Membrane Concept , 2010 .

[20]  M. Lacroix,et al.  Prediction of a 2-D Solidification Front in High Temperature Furnaces by an Inverse Analysis , 2011 .

[21]  Marcel Lacroix,et al.  Prediction of the Bank Formation in High Temperature Furnaces by a Sequential Inverse Analysis with Overlaps , 2011 .