Fe3O4 Nanoparticles Enhanced Amorphous Ferric Silicate/Reduced Graphene Oxide for High‐Performance Lithium‐Ion Storage

Ferric silicate (FS) has been explored as a potential lithium ion batteries candidate for its environment benign, low cost, rich reserves, and high capacity. Despite these advantages, poor electronic conductivity and large volume variation obstruct its practical utilization. To improve its electrochemical performance, a unique hybrid structure with Fe3O4@ferric silicate nanosheets anchored on the reduced graphene oxide (FO@FS/RGO) is fabricated. The disordered amorphous nanosheet structure of FS not only shortens the transferred length for lithium ions but also facilities the Li+ diffusion and can effectively keep the structure integrity. RGO substrate ameliorates the electronic conductivity and slackens the strain upon cycling. Fe3O4 (FO) nanoparticles embedded in FS further boost the electronic conductivity and the lithium storage capability. The synergistic effects bestow the composite superior electrochemical properties. FO@FS/RGO shows high reversible capacity of 1113 mA h g−1 at 0.2 A g−1, an excellent rate performance of 681 mA h g−1 at 2 A g−1, and a splendid cycling stability with a capacity of 859 mA h g−1 at 1 A g−1 after 800 cycles.

[1]  Chunjuan Tang,et al.  Porous Carbon@Ferric Silicate Hollow Spheres for Enhanced Lithium and Sodium Storage , 2022, Energy Technology.

[2]  Meifang Zhu,et al.  Ultrahigh line-capacity and flexible graphene/carbon nanotube/tin oxide fibers as sodium ion battery anodes , 2022, Energy Storage Materials.

[3]  H. Pang,et al.  Ultrasmall metal (Fe, Co, Ni) nanoparticles strengthen silicon oxide embedded nitrogen-doped carbon superstructures for long-cycle-life Li-ion-battery anodes , 2021, Chemical Engineering Journal.

[4]  Xiao-Yu Yan,et al.  Structural design of Ni-silicate/CNT hybrid films as anode materials for highly reversible lithium and sodium storage , 2021, Sustainable Materials and Technologies.

[5]  Zhuqing Zhao,et al.  Electrochemically converting micro-sized industrial Si/FeSi2 to nano Si/FeSi for the high-performance lithium-ion battery anode , 2021 .

[6]  Chunjuan Tang,et al.  Zinc silicate@carbon bundled nanowires for durable lithium storage , 2021 .

[7]  Fei Xu,et al.  Laser‐Manufactured Metastable Supranano SnOx for Efficient Electron/Ion Bridging in SnO2‐Graphene Heterostructure Boosting Lithium Storage , 2021, Advanced Functional Materials.

[8]  Yang‐Kook Sun,et al.  Diverting Exploration of Silicon Anode into Practical Way: A Review Focused on Silicon-Graphite Composite for Lithium Ion Batteries , 2021 .

[9]  Wenping Si,et al.  Ultrathin Ni Co -silicate nanosheets natively anchored on CNTs films for flexible lithium ion batteries , 2021, Journal of Energy Chemistry.

[10]  E. Xie,et al.  Cobalt sulfide embedded carbon nanofibers as a self-supporting template to improve lithium ion battery performances , 2021 .

[11]  Hong Jin,et al.  Yolk–Shell Cu2O@CuO‐decorated RGO for High‐Performance Lithium‐Ion Battery Anode , 2020, ENERGY & ENVIRONMENTAL MATERIALS.

[12]  I. Kim,et al.  Self-healing gallium phosphide embedded in a hybrid matrix for high-performance Li-ion batteries , 2021 .

[13]  Q. Ramasse,et al.  Long Cycle Life, Highly Ordered SnO2/GeO2 Nanocomposite Inverse Opal Anode Materials for Li‐Ion Batteries , 2020, Advanced Functional Materials.

[14]  A. Bachmatiuk,et al.  Phosphorus‐Based Composites as Anode Materials for Advanced Alkali Metal Ion Batteries , 2020, Advanced Functional Materials.

[15]  R. Kostecki,et al.  Achieving Fast and Durable Lithium Storage through Amorphous FeP Nanoparticles Encapsulated in Ultrathin 3D P-Doped Porous Carbon Nanosheets. , 2020, ACS nano.

[16]  L. Mai,et al.  Facile formation of tetragonal-Nb2O5 microspheres for high-rate and stable lithium storage with high areal capacity. , 2020, Science bulletin.

[17]  Jian Yang,et al.  Pseudocapacitance boosted N-doped carbon coated Fe7S8 nanoaggregates as promising anode materials for lithium and sodium storage , 2020, Nano Research.

[18]  Li Wang,et al.  Porous Fe2O3/Fe3O4@Carbon octahedron arrayed on three-dimensional graphene foam for lithium-ion battery , 2019, Composites Part B: Engineering.

[19]  Jianlin Shi,et al.  Fe3O4-Embedded and N-Doped Hierarchically Porous Carbon Nanospheres as High-Performance Lithium Ion Battery Anodes , 2019, ACS Sustainable Chemistry & Engineering.

[20]  D. Zhao,et al.  Monodisperse and homogeneous SiO /C microspheres: A promising high-capacity and durable anode material for lithium-ion batteries , 2018, Energy Storage Materials.

[21]  L. Mai,et al.  Nonhierarchical Heterostructured Fe2 O3 /Mn2 O3 Porous Hollow Spheres for Enhanced Lithium Storage. , 2018, Small.

[22]  L. Mai,et al.  Ultrafine Nickel‐Nanoparticle‐Enabled SiO2 Hierarchical Hollow Spheres for High‐Performance Lithium Storage , 2018 .

[23]  L. Mai,et al.  Porous and Low-Crystalline Manganese Silicate Hollow Spheres Wired by Graphene Oxide for High-Performance Lithium and Sodium Storage. , 2017, ACS applied materials & interfaces.

[24]  Jianjun Jiang,et al.  Nitrogen-rich hard carbon as a highly durable anode for high-power potassium-ion batteries , 2017 .

[25]  Tao Li,et al.  One-Step Fabrication of Fe-Si-O/Carbon Nanotube Composite Anode Material with Excellent High-Rate Long-Term Cycling Stability , 2016 .

[26]  Jinbao Zhao,et al.  A Facile Electrophoretic Deposition Route to the Fe3O4/CNTs/rGO Composite Electrode as a Binder-Free Anode for Lithium Ion Battery. , 2016, ACS applied materials & interfaces.

[27]  Zaiping Guo,et al.  Encapsulation of Fe3O4 Nanoparticles into N, S co-Doped Graphene Sheets with Greatly Enhanced Electrochemical Performance , 2016, Scientific Reports.

[28]  Clement Bommier,et al.  Hard Carbon Microspheres: Potassium‐Ion Anode Versus Sodium‐Ion Anode , 2016 .

[29]  L. Mai,et al.  Copper Silicate Hydrate Hollow Spheres Constructed by Nanotubes Encapsulated in Reduced Graphene Oxide as Long-Life Lithium-Ion Battery Anode. , 2015, ACS applied materials & interfaces.

[30]  K. Kang,et al.  Hollow Nanostructured Metal Silicates with Tunable Properties for Lithium Ion Battery Anodes. , 2015, ACS applied materials & interfaces.

[31]  Chaojiang Niu,et al.  Manganese oxide/carbon yolk-shell nanorod anodes for high capacity lithium batteries. , 2015, Nano letters.

[32]  L. Mai,et al.  Metastable amorphous chromium-vanadium oxide nanoparticles with superior performance as a new lithium battery cathode , 2014, Nano Research.

[33]  J. Lian,et al.  High-rate lithiation-induced reactivation of mesoporous hollow spheres for long-lived lithium-ion batteries , 2014, Nature Communications.

[34]  Yu‐Guo Guo,et al.  Carbon‐Nanotube‐Decorated Nano‐LiFePO4 @C Cathode Material with Superior High‐Rate and Low‐Temperature Performances for Lithium‐Ion Batteries , 2013 .

[35]  Ya‐Xia Yin,et al.  Improving the Li-ion storage performance of layered zinc silicate through the interlayer carbon and reduced graphene oxide networks. , 2013, ACS applied materials & interfaces.

[36]  Fengyun Sun,et al.  Synthesis and electrochemical properties of Zn2SiO4 nano/mesorods , 2013 .

[37]  Bruce Dunn,et al.  High-rate electrochemical energy storage through Li+ intercalation pseudocapacitance. , 2013, Nature materials.

[38]  Jiajun Li,et al.  Carbon-encapsulated Fe3O4 nanoparticles as a high-rate lithium ion battery anode material. , 2013, ACS nano.

[39]  Xun Wang,et al.  Ni3Si2O5(OH)4 multi-walled nanotubes with tunable magnetic properties and their application as anode materials for lithium batteries , 2011 .

[40]  T. Yamashita,et al.  Analysis of XPS spectra of Fe2+ and Fe3+ ions in oxide materials , 2008 .

[41]  K. Abe,et al.  Amorphous titanium oxide electrode for high-rate discharge and charge , 2004 .

[42]  K. Kishi Adsorption of ethylenediamine on clean and oxygen covered Fe/Ni(100) surfaces studied by XPS , 1988 .

[43]  Thomas A. Carlson,et al.  Use of X‐Ray Photoelectron Spectroscopy to Study Bonding in Cr, Mn, Fe, and Co Compounds , 1972 .