Effect of fabrication methods of bifunctional catalyst layers on unitized regenerative fuel cell performance

In order to understand the origins of performance variations in unitized regenerative fuel cells (URFCs), bifunctional catalyst layers (BCLs) fabricated with two different methods, i.e., ink deposition on membrane or GDL. were designed in this paper. The performances of the two different methods were evaluated, and their reaction dynamics were measured by electrochemical impedance spectra. The different BCLs, caused by the different preparation processes, were found to influence the fuel cell performance. The cell potentials of the URFCs using platinum sprayed onto the gas diffusion layer (GDL) are above 0.100 V higher than those with platinum sprayed onto the membrane at 800 mA cm(-2) in fuel cell (FC) mode. The mass transport resistances of the URFCs at different operation modes were also compared. It was proved that the platinum layer formed by applying platinum onto the GDL could prevent the cell from water flooding in FC mode. However, it was found that the cell performance changed slightly in water electrolysis mode with different BCLs. The electron conduction path was also found to be hindered by an IrO(2) agglomerate, which led to a decrease in cell performance. The highest and lowest round-trip efficiencies of the URFC with different BCLs were 42.1% and 22.3%, respectively, at 800 mA cm(-2). (C) 2009 Elsevier Ltd. All rights reserved.

[1]  R. Shriner,et al.  PLATINUM OXIDE AS A CATALYST IN THE REDUCTION OF ORGANIC COMPOUNDS. III. PREPARATION AND PROPERTIES OF THE OXIDE OF PLATINUM OBTAINED BY THE FUSION OF CHLOROPLATINIC ACID WITH SODIUM NITRATE1 , 1923 .

[2]  Falin Chen,et al.  Effects of porosity change of gas diffuser on performance of proton exchange membrane fuel cell , 2003 .

[3]  Yongzhu Fu,et al.  Development of novel self-humidifying composite membranes for fuel cells , 2003 .

[4]  Mu Pan,et al.  Porosity-graded micro-porous layers for polymer electrolyte membrane fuel cells , 2007 .

[5]  Tsutomu Ioroi,et al.  IrO2-deposited Pt electrocatalysts for unitized regenerative polymer electrolyte fuel cells , 2001 .

[6]  Yann Bultel,et al.  Electrocatalysis, diffusion and ohmic drop in PEMFC: Particle size and spatial discrete distribution effects , 1998 .

[7]  T. Springer,et al.  Characterization of polymer electrolyte fuel cells using ac impedance spectroscopy , 1996 .

[8]  Jiujun Zhang,et al.  Micro-porous layer with composite carbon black for PEM fuel cells , 2006 .

[9]  S. Sunde,et al.  Performance of a PEM water electrolysis cell using IrxRuyTazO2 electrocatalysts for the oxygen evolution electrode , 2007 .

[10]  M. Barak,et al.  Power Sources 4 , 1974 .

[11]  Tsutomu Ioroi,et al.  Influence of PTFE coating on gas diffusion backing for unitized regenerative polymer electrolyte fuel cells , 2003 .

[12]  Ursula Wittstadt,et al.  Membrane electrode assemblies for unitised regenerative polymer electrolyte fuel cells , 2005 .

[13]  Huamin Zhang,et al.  A novel membrane electrode assembly for improving the efficiency of the unitized regenerative fuel cell , 2008 .

[14]  Anthony B. LaConti,et al.  Proton-exchange membrane regenerative fuel cells , 1994 .

[15]  A. Kornyshev,et al.  Electrochemical impedance of the cathode catalyst layer in polymer electrolyte fuel cells , 1999 .

[16]  F. Mitlitsky,et al.  Regenerative Fuel Cell Systems , 1998 .

[17]  Zongqiang Mao,et al.  Deposited RuO2–IrO2/Pt electrocatalyst for the regenerative fuel cell , 2007 .

[18]  Mariana Ciureanu and,et al.  Electrochemical Impedance Study of PEM Fuel Cells. Experimental Diagnostics and Modeling of Air Cathodes , 2001 .

[19]  Chang-Soo Kim,et al.  Optimization of bifunctional electrocatalyst for PEM unitized regenerative fuel cell , 2004 .

[20]  David Harrison,et al.  A review of the latest developments in electrodes for unitised regenerative polymer electrolyte fuel cells , 2006 .

[21]  Egil Rasten.  Electrocatalysis in water electrolysis with solid polymerelectrolyte , 2003 .

[22]  Guoying Chen,et al.  Combinatorial discovery of bifunctional oxygen reduction — water oxidation electrocatalysts for regenerative fuel cells , 2001 .

[23]  B. Yi,et al.  Composite Electrode for Unitized Regenerative Proton Exchange Membrane Fuel Cell with Improved Cycle Life , 2004 .