Thin film encapsulated SiGe accelerometer for MEMS above IC integration

This paper presents the design, fabrication and characterization of a thin film encapsulated SiGe accelerometer, in an attempt to demonstrate the feasibility of fabricating SiGe MEMS inertial sensors above standard CMOS with thin film wafer level permanent packaging. The capacitive in-plane inertial sensor features comb fingers and shock stoppers with minimum lateral gap of 500nm. The thickness of the structural layer is 4µm, which is processed on a wafer with silicon oxide protected metal layer, to mimic the top metal of standard CMOS. Both dynamic and angular electrical characterizations of the sensor are performed. The performance of the senor has been compared with commercialized accelerometer.

[1]  S. Decoutere,et al.  Above-IC generic poly-SiGe thin film wafer level packaging and MEM device technology: Application to accelerometers , 2011, 2011 IEEE 24th International Conference on Micro Electro Mechanical Systems.

[2]  R. Puers,et al.  SU-8 thermo-compressive packaging for post-CMOS poly-SiGe MEMS , 2009 .

[3]  S. Decoutere,et al.  CMOS-integrated poly-SiGe cantilevers with read/write system for probe storage device , 2009, TRANSDUCERS 2009 - 2009 International Solid-State Sensors, Actuators and Microsystems Conference.

[4]  S. Smith,et al.  Test Structures for the Characterization of MEMS and CMOS Integration Technology , 2008, IEEE Transactions on Semiconductor Manufacturing.

[5]  Tsu-Jae King,et al.  Thermal budget limits of quarter-micrometer foundry CMOS for post-processing MEMS devices , 2005, IEEE Transactions on Electron Devices.

[6]  L.E. Felton,et al.  Chip scale packaging of a MEMS accelerometer , 2004, 2004 Proceedings. 54th Electronic Components and Technology Conference (IEEE Cat. No.04CH37546).

[7]  R. Puersa,et al.  Design and characterization of a CMOS compatible poly-SiGe low-g capacitive accelerometer , 2010 .

[8]  Robert Puers,et al.  Design and characterization of a CMOS compatible poly-SiGe lowg capacitive accelerometer , 2010 .

[9]  Robert Puers,et al.  Mechanical characterization of poly-SiGe layers for CMOS–MEMS integrated application , 2009 .

[10]  A. Witvrouw,et al.  Highly reliable CMOS-integrated 11MPixel SiGe-based micro-mirror arrays for high-end industrial applications , 2008, 2008 IEEE International Electron Devices Meeting.

[11]  K. Meyer,et al.  Design and characterization of thin SiGe membranes for MEMS packaging at wafer level , 2008 .

[12]  A. Witvrouw,et al.  A 10 μm thick poly-SiGe gyroscope processed above 0.35 μm CMOS , 2007, 2007 IEEE 20th International Conference on Micro Electro Mechanical Systems (MEMS).