Less conservative absolute stability criteria using Integral Quadratic Constraints

Lur'e systems, that are described by the feedback interconnection of a linear time invariant system and a nonlinear system, form an important class of nonlinear systems arising in many modern applications. A number of absolute stability criteria are available where the stability is guaranteed with the nonlinearity restricted to a pre-specified set. Most of these criteria provide sufficient conditions for absolute stability, thus lessening the conservativeness remains a challenge. A method of reducing conservativeness is to first estimate the part of the nonlinearity that is appropriate from an asymptotic sense followed by the application of a preferred absolute stability criteria to the more restricted nonlinearity. A comprehensive framework that incorporates the above approach is developed in this paper that employs a methodology based on Integral Quadratic Constraints as a means of describing the nonlinearity. It is shown that the developed framework can be used to conclude absolute stability of Lur'e interconnections where all of the existing criteria fail to be satisfied. Indeed, examples are provided where the nonlinearity does not fall into the classes assumed by existing absolute criteria. Another contribution of the article is the extension of IQC theory.

[1]  I. Sandberg A frequency-domain condition for the stability of feedback systems containing a single time-varying nonlinear element , 1964 .

[2]  A. Sebastian,et al.  Modeling and Experimental Identification of Silicon Microheater Dynamics: A Systems Approach , 2008, Journal of Microelectromechanical Systems.

[3]  A. Sebastian,et al.  Dynamics of Silicon Micro-Heaters: Modelling and Experimental Identification , 2006, 19th IEEE International Conference on Micro Electro Mechanical Systems.

[4]  K. Narendra,et al.  An off-axis circle criterion for stability of feedback systems with a monotonic nonlinearity , 1968 .

[5]  Murti V. Salapaka,et al.  Modeling and identification of the dynamics of electrostatically actuated microcantilever with integrated thermal sensor , 2008, 2008 47th IEEE Conference on Decision and Control.

[6]  Murti V. Salapaka,et al.  Harmonic and power balance tools for tapping-mode atomic force microscope , 2001 .

[7]  Murti V. Salapaka,et al.  A Review of the Systems Approach to the Analysis of Dynamic-Mode Atomic Force Microscopy , 2007, IEEE Transactions on Control Systems Technology.

[8]  A. Rantzer,et al.  System analysis via integral quadratic constraints , 1997, IEEE Trans. Autom. Control..

[9]  T. Başar Absolute Stability of Nonlinear Systems of Automatic Control , 2001 .

[10]  A. Rantzer,et al.  System analysis via integral quadratic constraints , 1994, Proceedings of 1994 33rd IEEE Conference on Decision and Control.

[11]  G. Zames On the input-output stability of time-varying nonlinear feedback systems--Part II: Conditions involving circles in the frequency plane and sector nonlinearities , 1966 .

[12]  A. Megretski Combining L1 and L2 methods in the robust stability and performance analysis of nonlinear systems , 1995, Proceedings of 1995 34th IEEE Conference on Decision and Control.