Recent advances in prognostics and health management for advanced manufacturing paradigms

Abstract Manufacturing paradigms have played their important roles in modern industry. In recent 20 years, production systems of advanced manufacturing paradigms (e.g. mass customization, reconfigurable manufacturing, sustainable manufacturing and service-oriented manufacturing) have been developed to exceed the traditional “mass production” paradigm. The reasons that make system health management especially difficult include individual machine deteriorations, different system structures, diverse production characteristics and exponential scheduling complexity. To address these gaps, we provide a review of the prognostics and health management (PHM) field focusing on prognostics approaches for asset health, and maintenance policies for more “informed” decisions. This paper addresses recent advances in PHM for advanced manufacturing paradigms to forecast health trends, avoid production breakdowns, reduce maintenance cost and achieve rapid decision-making. Furthermore, an in-depth look at future research interests is provided.

[1]  Xiaojun Zhou,et al.  Condition-based maintenance for intelligent monitored series system with independent machine failure modes , 2013 .

[2]  Deyi Xue,et al.  A multi-population co-evolutionary genetic programming approach for optimal mass customisation production , 2017, Int. J. Prod. Res..

[3]  M. Fujishima,et al.  Study of optimal cutting condition for energy efficiency improvement in ball end milling with tool-workpiece inclination , 2012 .

[4]  D. N. Prabhakar Murthy,et al.  Optimal periodic preventive maintenance policy for leased equipment , 2006, Reliab. Eng. Syst. Saf..

[5]  Brigitte Chebel-Morello,et al.  Direct Remaining Useful Life Estimation Based on Support Vector Regression , 2017, IEEE Transactions on Industrial Electronics.

[6]  Andres F. Clarens,et al.  A Review of Engineering Research in Sustainable Manufacturing , 2013 .

[7]  M. A. Sanz-Bobi,et al.  Performance Analysis and Anomaly Detection in Wind Turbines based on Neural Networks and Principal Component Analysis , 2017 .

[8]  Selin Aviyente,et al.  Extended Kalman Filtering for Remaining-Useful-Life Estimation of Bearings , 2015, IEEE Transactions on Industrial Electronics.

[9]  Phuc Do,et al.  Energy efficiency performance-based prognostics for aided maintenance decision-making: Application to a manufacturing platform , 2017 .

[10]  Paolo Renna,et al.  Flexibility configurations and preventive maintenance impact on job-shop manufacturing systems , 2017 .

[11]  Mahmood Shafiee,et al.  Maintenance models in warranty: A literature review , 2013, Eur. J. Oper. Res..

[12]  Tangbin Xia,et al.  Optimal multi-level classification and preventive maintenance policy for highly reliable products , 2017, Int. J. Prod. Res..

[13]  Michel Gendreau,et al.  A cost minimisation model for joint production and maintenance planning under quality constraints , 2017 .

[14]  Jun Xie,et al.  A method for predicting the energy consumption of the main driving system of a machine tool in a machining process , 2015 .

[15]  Yanyang Zi,et al.  A Two-Stage Data-Driven-Based Prognostic Approach for Bearing Degradation Problem , 2016, IEEE Transactions on Industrial Informatics.

[16]  Yisha Xiang,et al.  A review on condition-based maintenance optimization models for stochastically deteriorating system , 2017, Reliab. Eng. Syst. Saf..

[17]  Om Prakash,et al.  Model-based multi-component adaptive prognosis for hybrid dynamical systems , 2018 .

[18]  Lin Ma,et al.  Prognostic modelling options for remaining useful life estimation by industry , 2011 .

[19]  Yoram Koren,et al.  Design of reconfigurable manufacturing systems , 2010 .

[20]  Zhigang Tian,et al.  Condition based maintenance optimization for multi-component systems using proportional hazards model , 2011, Reliab. Eng. Syst. Saf..

[21]  Min Liu,et al.  A novel approach for bearing remaining useful life estimation under neither failure nor suspension histories condition , 2017, J. Intell. Manuf..

[22]  Tangbin Xia,et al.  Design for diagnosability of multistation manufacturing systems based on sensor allocation optimization , 2009, Comput. Ind..

[23]  Linkai Niu,et al.  A systematic study of ball passing frequencies based on dynamic modeling of rolling ball bearings with localized surface defects , 2015 .

[24]  Noureddine Zerhouni,et al.  Data-driven prognostic method based on Bayesian approaches for direct remaining useful life prediction , 2016, J. Intell. Manuf..

[25]  Tzong-Ru Tsai,et al.  Periodical preventive maintenance contract for leased equipment with random failure penalties , 2017, Comput. Ind. Eng..

[26]  J. Ni,et al.  Manufacturing productivity and energy efficiency: a stochastic efficiency frontier analysis , 2015 .

[27]  Huajing Fang,et al.  An integrated unscented kalman filter and relevance vector regression approach for lithium-ion battery remaining useful life and short-term capacity prediction , 2015, Reliab. Eng. Syst. Saf..

[28]  Sarangapani Jagannathan,et al.  A Model-Based Fault Detection and Prognostics Scheme for Takagi–Sugeno Fuzzy Systems , 2014, IEEE Transactions on Fuzzy Systems.

[29]  Hui-Chiung Lo,et al.  Joint determination of lease period and preventive maintenance policy for leased equipment with residual value , 2011, Comput. Ind. Eng..

[30]  Benny Tjahjono,et al.  A novel framework to link Prognostics and Health Management and Product-Service Systems using online simulation , 2012, Comput. Ind..

[31]  Jay Lee,et al.  A review on prognostics and health monitoring of Li-ion battery , 2011 .

[32]  Li-Feng Xi,et al.  Operation Process Rebuilding (OPR)-Oriented Maintenance Policy for Changeable System Structures , 2017, IEEE Transactions on Automation Science and Engineering.

[33]  Jing Zhou,et al.  Integrated reconfiguration and age-based preventive maintenance decision making , 2007 .

[34]  Jan Lundberg,et al.  Remaining useful life estimation: review , 2014, Int. J. Syst. Assur. Eng. Manag..

[35]  Idriss El-Thalji,et al.  A summary of fault modelling and predictive health monitoring of rolling element bearings , 2015 .

[36]  Ratna Babu Chinnam,et al.  Simulation platform for anticipative plant-level maintenance decision support system , 2016 .

[37]  Xiaohui Chen,et al.  Joint optimization of production scheduling and machine group preventive maintenance , 2016, Reliab. Eng. Syst. Saf..

[38]  D. N. Prabhakar Murthy,et al.  Extended Warranties, Maintenance Service and Lease Contracts: Modeling and Analysis for Decision-Making , 2014 .

[39]  Patrik Hilber,et al.  Impact of health indicators on maintenance management and operation of power systems , 2017 .

[40]  Robert X. Gao,et al.  A multi-time scale approach to remaining useful life prediction in rolling bearing , 2017 .

[41]  Ravi Shankar,et al.  A big data driven sustainable manufacturing framework for condition-based maintenance prediction , 2017, J. Comput. Sci..

[42]  Quan-Lin Li,et al.  Algorithm for a general discrete k-out-of-n: G system subject to several types of failure with an indefinite number of repairpersons , 2011, Eur. J. Oper. Res..

[43]  Tangbin Xia,et al.  Reconfiguration-oriented opportunistic maintenance policy for reconfigurable manufacturing systems , 2017, Reliab. Eng. Syst. Saf..

[44]  Makoto Fujishima,et al.  A study on energy efficiency improvement for machine tools , 2011 .

[45]  Zhongbao Zhou,et al.  A Bayesian framework for on-line degradation assessment and residual life prediction of secondary batteries in spacecraft , 2013, Reliab. Eng. Syst. Saf..

[46]  Ruey Huei Yeh,et al.  Optimal preventive maintenance policy for leased equipment using failure rate reduction , 2009, Comput. Ind. Eng..

[47]  Wenhai Wang,et al.  Remaining useful life prediction for an adaptive skew-Wiener process model , 2017 .

[48]  Ming Liang,et al.  Spectral kurtosis for fault detection, diagnosis and prognostics of rotating machines: A review with applications , 2016 .

[49]  Wenbin Wang,et al.  An overview of the recent advances in delay-time-based maintenance modelling , 2012, Reliab. Eng. Syst. Saf..

[50]  Maxim Finkelstein,et al.  A proactive group maintenance policy for continuously monitored deteriorating systems: Application to offshore wind turbines , 2015 .

[51]  Jun Ni,et al.  Joint Production and Preventive Maintenance Strategy for Manufacturing Systems With Stochastic Demand , 2013 .

[52]  D. N. Prabhakar Murthy,et al.  Optimal preventive maintenance of leased equipment with corrective minimal repairs , 2006, Eur. J. Oper. Res..

[53]  Zied Hajej,et al.  Improved preventive maintenance in the framework of forecasting problem under subcontractor constraint , 2017 .

[54]  Jun Ni,et al.  Prediction of Passive Maintenance Opportunity Windows on Bottleneck Machines in Complex Manufacturing Systems , 2015 .

[55]  Nagi Gebraeel,et al.  An adaptive functional regression-based prognostic model for applications with missing data , 2015, Reliab. Eng. Syst. Saf..

[56]  Jay Lee,et al.  Prognostics and health management design for rotary machinery systems—Reviews, methodology and applications , 2014 .

[57]  Hui Zhu,et al.  Due-window assignment and scheduling with general position-dependent processing times involving a deteriorating and compressible maintenance activity , 2016 .

[58]  Samir Lamouri,et al.  Simultaneously scheduling n jobs and the preventive maintenance on the two-machine flow shop to minimize the makespan , 2008 .

[59]  Denis V. Efimov,et al.  Interval State Estimation for a Class of Nonlinear Systems , 2012, IEEE Transactions on Automatic Control.

[60]  Waguih ElMaraghy,et al.  Design of reconfigurable automotive framing system , 2013 .

[61]  Tarek Raïssi,et al.  Set-membership methodology for model-based prognosis. , 2017, ISA transactions.

[62]  Sarangapani Jagannathan,et al.  A Model-Based Fault-Detection and Prediction Scheme for Nonlinear Multivariable Discrete-Time Systems With Asymptotic Stability Guarantees , 2010, IEEE Transactions on Neural Networks.

[63]  Jun Ni,et al.  Two-Zone Proportional Hazard Model for Equipment Remaining Useful Life Prediction , 2010 .

[64]  Xiang Li,et al.  Machine health condition prediction via online dynamic fuzzy neural networks , 2014, Eng. Appl. Artif. Intell..

[65]  Nagi Gebraeel,et al.  Scalable prognostic models for large-scale condition monitoring applications , 2017 .

[66]  Tangbin Xia,et al.  Production-driven opportunistic maintenance for batch production based on MAM-APB scheduling , 2015, Eur. J. Oper. Res..

[67]  Zhengqiang Pan,et al.  Reliability modeling of degradation of products with multiple performance characteristics based on gamma processes , 2011, Reliab. Eng. Syst. Saf..

[68]  I. S. Jawahir,et al.  Sustainable manufacturing: Modeling and optimization challenges at the product, process and system levels , 2010 .

[69]  Lester Lipsky,et al.  Queueing Theory: A Linear Algebraic Approach , 1992 .

[70]  Daming Lin,et al.  A review on machinery diagnostics and prognostics implementing condition-based maintenance , 2006 .

[71]  Jun Lv,et al.  Degradation process prediction for rotational machinery based on hybrid intelligent model , 2012 .

[72]  Ming Jian Zuo,et al.  Health Condition Prediction of Gears Using a Recurrent Neural Network Approach , 2010, IEEE Transactions on Reliability.

[73]  Jing Pan,et al.  Prognostic Degradation Models for Computing and Updating Residual Life Distributions in a Time-Varying Environment , 2008, IEEE Transactions on Reliability.

[74]  Bin Liang,et al.  Remaining useful life prediction of aircraft engine based on degradation pattern learning , 2017, Reliab. Eng. Syst. Saf..

[75]  Noureddine Zerhouni,et al.  Particle filter-based prognostics: Review, discussion and perspectives , 2016 .

[76]  I. S. Jawahir,et al.  Sustainable Living Factories for Next Generation Manufacturing , 2018 .

[77]  John Lindström,et al.  Towards Intelligent and Sustainable Production: Combining and Integrating Online Predictive Maintenance and Continuous Quality Control , 2017 .

[78]  Mitra Fouladirad,et al.  Remaining useful lifetime estimation and noisy gamma deterioration process , 2016, Reliab. Eng. Syst. Saf..

[79]  Najib M. Najid,et al.  An integrated production and maintenance planning model with time windows and shortage cost , 2011 .

[80]  H. Mehdigholi,et al.  Estimation of rolling bearing life with damage curve approach , 2011 .

[81]  N. Gebraeel,et al.  Lease-oriented opportunistic maintenance for multi-unit leased systems under product-service paradigm , 2017 .

[82]  Bo-Suk Yang,et al.  A hybrid of nonlinear autoregressive model with exogenous input and autoregressive moving average model for long-term machine state forecasting , 2010, Expert Syst. Appl..

[83]  Le Cao,et al.  Energy efficiency analysis of machine tools with periodic maintenance , 2014 .

[84]  Giovani J.C. da Silveira,et al.  The mass customization decade: An updated review of the literature , 2012 .

[85]  Xue-peng Jiang,et al.  Review of Reliability Analysis Based on Degradation Modeling , 2018 .

[86]  Peter Tavner,et al.  Condition Monitoring for Device Reliability in Power Electronic Converters: A Review , 2010, IEEE Transactions on Power Electronics.

[87]  Tangbin Xia,et al.  Energy-oriented maintenance decision-making for sustainable manufacturing based on MAM-ESW methodology , 2018 .

[88]  Hubert Razik,et al.  Hidden Markov Models for the Prediction of Impending Faults , 2016, IEEE Transactions on Industrial Electronics.

[89]  Semyon M. Meerkov,et al.  Feasibility and optimization of preventive maintenance in exponential machines and serial lines , 2010 .

[90]  Zhimin Xi,et al.  Data Driven Prognostics With Lack of Training Data Sets , 2015, DAC 2015.

[91]  Huiguo Zhang,et al.  A hybrid prognostics and health management approach for condition-based maintenance , 2009, 2009 IEEE International Conference on Industrial Engineering and Engineering Management.

[92]  Bo-Suk Yang,et al.  Machine performance degradation assessment and remaining useful life prediction using proportional hazard model and support vector machine , 2012, WCE 2010.

[93]  Jianming Yao,et al.  Scheduling Optimization in the Mass Customization of Global Producer Services , 2015, IEEE Transactions on Engineering Management.

[94]  Yingfeng Zhang,et al.  A big data analytics architecture for cleaner manufacturing and maintenance processes of complex products , 2017 .

[95]  E. Zio,et al.  Prognostics and Health Management of Industrial Equipment , 2019 .

[96]  Nidhal Rezg,et al.  Maintenance strategy for leased equipment , 2013, Comput. Ind. Eng..

[97]  Lisa M. Maillart,et al.  Structured Replacement Policies for Components with Complex Degradation Processes and Dedicated Sensors , 2011, Oper. Res..

[98]  Seungchul Lee,et al.  Markov-Based Maintenance Planning Considering Repair Time and Periodic Inspection , 2013 .

[99]  Peyman Mazidi,et al.  A performance and maintenance evaluation framework for wind turbines , 2016, 2016 International Conference on Probabilistic Methods Applied to Power Systems (PMAPS).

[100]  Rong Li,et al.  Residual-life distributions from component degradation signals: A Bayesian approach , 2005 .

[101]  Mustapha Nourelfath,et al.  Integrating noncyclical preventive maintenance scheduling and production planning for multi-state systems , 2014, Reliab. Eng. Syst. Saf..

[102]  Wheyming Tina Song.  The Song Rule as a Validator of Analytical Results—A Note Correcting System Reliability Results in a Review of the Literature , 2017, IEEE Transactions on Reliability.

[103]  Ruud H. Teunter,et al.  Condition-based maintenance policies for systems with multiple dependent components: A review , 2017, Eur. J. Oper. Res..

[104]  Xiaohui Chen,et al.  An integrated model of production scheduling and maintenance planning under imperfect preventive maintenance , 2015 .

[105]  Shujuan Zhou,et al.  Online machine health prognostics based on modified duration-dependent hidden semi-Markov model and high-order particle filtering , 2018 .

[106]  Peyman Mazidi,et al.  Wind turbine prognostics and maintenance management based on a hybrid approach of neural networks and a proportional hazards model , 2017 .

[107]  Dawn An,et al.  Practical options for selecting data-driven or physics-based prognostics algorithms with reviews , 2015, Reliab. Eng. Syst. Saf..

[108]  Christophe Bérenguer,et al.  An opportunistic condition-based maintenance policy for offshore wind turbine blades subjected to degradation and environmental shocks , 2015, Reliab. Eng. Syst. Saf..

[109]  Peyman Mazidi,et al.  A health condition model for wind turbine monitoring through neural networks and proportional hazard models , 2017 .

[110]  陆志强,et al.  A dynamic method for the production lot sizing with machine failures , 2014 .

[111]  Onur Kuzgunkaya,et al.  Impact of reconfiguration characteristics for capacity investment strategies in manufacturing systems , 2012 .

[112]  Saad Mekhilef,et al.  A review on energy saving strategies in industrial sector , 2011 .

[113]  Jianbo Yu,et al.  Adaptive hidden Markov model-based online learning framework for bearing faulty detection and performance degradation monitoring , 2017 .

[114]  Idriss El-Thalji,et al.  Dynamic modelling of wear evolution in rolling bearings , 2015 .

[115]  Lei Huang,et al.  Prognosis of Hybrid Systems With Multiple Incipient Faults: Augmented Global Analytical Redundancy Relations Approach , 2011, IEEE Transactions on Systems, Man, and Cybernetics - Part A: Systems and Humans.

[116]  Linxia Liao,et al.  A hybrid framework combining data-driven and model-based methods for system remaining useful life prediction , 2016, Appl. Soft Comput..

[117]  Donghua Zhou,et al.  Remaining useful life estimation - A review on the statistical data driven approaches , 2011, Eur. J. Oper. Res..

[118]  Rongjing Hong,et al.  Degradation trend estimation of slewing bearing based on LSSVM model , 2016 .

[119]  Florian Dörfler,et al.  Attack Detection and Identification in Cyber-Physical Systems -- Part II: Centralized and Distributed Monitor Design , 2012, ArXiv.

[120]  Noureddine Zerhouni,et al.  State of the art and taxonomy of prognostics approaches, trends of prognostics applications and open issues towards maturity at different technology readiness levels , 2017 .

[121]  Linxia Liao,et al.  Review of Hybrid Prognostics Approaches for Remaining Useful Life Prediction of Engineered Systems, and an Application to Battery Life Prediction , 2014, IEEE Transactions on Reliability.

[122]  Chang Liu,et al.  Dynamic supply chain integration optimization in service mass customization , 2018, Comput. Ind. Eng..

[123]  Nagi Z. Gebraeel,et al.  Sensor-Driven Condition-Based Generator Maintenance Scheduling—Part I: Maintenance Problem , 2016, IEEE Transactions on Power Systems.

[124]  Joseph Mathew,et al.  A review on prognostic techniques for non-stationary and non-linear rotating systems , 2015 .

[125]  Ming Liu,et al.  A branch and bound algorithm for single-machine production scheduling integrated with preventive maintenance planning , 2013 .

[126]  Ivo Paixao de Medeiros,et al.  Remaining useful life estimation in aeronautics: Combining data-driven and Kalman filtering , 2018, Reliab. Eng. Syst. Saf..

[127]  Nagi Gebraeel,et al.  Residual life predictions from vibration-based degradation signals: a neural network approach , 2004, IEEE Transactions on Industrial Electronics.

[128]  Peter Muchiri,et al.  Risk assessment methodologies in maintenance decision making: A review of dependability modelling approaches , 2018, Reliab. Eng. Syst. Saf..

[129]  Wenyuan Lv,et al.  A novel method using adaptive hidden semi-Markov model for multi-sensor monitoring equipment health prognosis , 2015 .

[130]  Tangbin Xia,et al.  Dynamic Opportunistic Maintenance Scheduling for Series Systems Based on Theory of Constraints (TOC)–VLLTW Methodology , 2017 .

[131]  Giuseppe Paletta,et al.  Makespan minimisation with sequence-dependent machine deterioration and maintenance events , 2017, Int. J. Prod. Res..

[132]  Xianzhong Dai,et al.  A revised electromagnetism-like mechanism for layout design of reconfigurable manufacturing system , 2012, Comput. Ind. Eng..

[133]  A. Chelbi,et al.  Optimal imperfect preventive maintenance policy for equipment leased during successive periods , 2016 .

[134]  S. Jack Hu,et al.  Evolving paradigms of manufacturing: From mass production to mass customization and personalization , 2013 .

[135]  Jun Ni,et al.  Preventive maintenance opportunities for large production systems , 2015 .

[136]  Guanghua Xu,et al.  A mixture Weibull proportional hazard model for mechanical system failure prediction utilising lifetime and monitoring data , 2014 .

[137]  Bo-Suk Yang,et al.  Machine health prognostics using survival probability and support vector machine , 2011, Expert Syst. Appl..

[138]  Ruey Huei Yeh,et al.  Preventive-maintenance policy for leased products under various maintenance costs , 2011, Expert Syst. Appl..

[139]  Krishna R. Pattipati,et al.  Model-Based Prognostic Techniques Applied to a Suspension System , 2008, IEEE Transactions on Systems, Man, and Cybernetics - Part A: Systems and Humans.

[140]  Abderrahmane Bensmaine,et al.  A non-dominated sorting genetic algorithm based approach for optimal machines selection in reconfigurable manufacturing environment , 2013, Comput. Ind. Eng..

[141]  Xiaopeng Jiang,et al.  A Review of Prognostic Techniques for High-Power White LEDs , 2017, IEEE Transactions on Power Electronics.

[142]  Zied Hajej,et al.  Jointly Production and Correlated Maintenance Optimization for Parallel Leased Machines , 2017 .

[143]  Xiaojun Zhou,et al.  Dynamic maintenance decision-making for series-parallel manufacturing system based on MAM-MTW methodology , 2012, Eur. J. Oper. Res..