Thermal contact conductance of selected polymeric materials

The thermal conductivity and thermal contact conductance of several thermoplastic and thermosetting polymers have been studied over a range of interface pressures and temperatures. The temperature range for the thermal conductivity study varied from 10 to 100°C (50 to 212°F). The study showed that ultra high molecular weight (UHMW) polyethylene had the highest thermal conductivity through the range of temperatures and also had the highest thermal conductance values at an interface temperature of 20°C (68°F). The thermal contact conductance study was conducted over a pressure range of 510-2760 kPa (75-400 psi) and a temperature range of 20-40°C (68-104°F). The conductance values for UHMW polyethylene ranged from 1095.3 to 1659.4 W/m2 K (192.9 to 292.2 Btu/h ft2 °F), whereas the thermal conductivity remained constant at 0.45 W/m K (0.26 Btu/h ft °F) throughout the range of temperatures. Polycarbonate and Teflon® had the next highest thermal conductance values at the same interface temperature. The thermal contact conductance values for polyethylene, Teflon, and phenolic polymers were measured at an elevated temperature of 40°C (104°F). The thermal contact conductance values for both Teflon and phenolic increased with increasing temperature, whereas the values for UHMW polyethylene decreased due to their unique chain structure at the higher temperature. The polymers were chosen because of their widespread engineering interest applications.

[1]  S. J. Kline,et al.  Describing Uncertainties in Single-Sample Experiments , 1953 .

[2]  M. Cooper,et al.  Thermal contact conductance , 1969 .

[3]  J. Mølgaard,et al.  The thermal contact resistance at gold foil surfaces , 1970 .

[4]  B. Mikic,et al.  THERMAL CONTACT CONDUCTANCE; THEORETICAL CONSIDERATIONS , 1974 .

[5]  John Wulff,et al.  Introduction To Materials Science And Engineering , 1976 .

[6]  L. Fletcher,et al.  The thermal conductance of dissimilar metals , 1982 .

[7]  M. Yovanovich,et al.  Enhancement of Thermal Contact Conductance by Metallic Coatings: Theory and Experiment , 1985 .

[8]  Leroy S. Fletcher,et al.  Contact heat transfer: the last decade , 1986 .

[9]  M. Yovanovich,et al.  Explicit relative contact pressure expression - Dependence upon surface roughness parameters and Vickers microhardness coefficients , 1987 .

[10]  Great Britain. Museums,et al.  An Introduction to materials , 1992 .

[11]  G. Peterson,et al.  Effect of metallic coatings on the thermal contact conductance of turned surfaces , 1990 .

[12]  G. Peterson,et al.  EVALUATION OF THERMAL ENHANCEMENT FILMS FOR ELECTRONIC PACKAGES , 1990 .

[13]  J. Scialdone,et al.  Thermal conductance of two interface materials and their applications in space systems , 1992 .

[14]  E. Marotta,et al.  Thermal contact conductance of refractory ceramic coatings , 1993 .

[15]  Metallic coatings for enhancement of thermal contact conductance , 1994 .

[16]  E. Marotta,et al.  The Thermal Contact Conductance of Hard and Soft Coat Anodized Aluminum , 1995 .

[17]  S. Bendahhou,et al.  Enhancement of the , 1996 .

[18]  E. Marotta,et al.  Thermal contact conductance of diamond-like films , 1996 .