A review on sludge dewatering indices.

Dewatering of sludge from sewage treatment plants is proving to be a significant challenge due to the large amounts of residual sludges generated annually. In recent years, research and development have focused on improving the dewatering process in order to reduce subsequent costs of sludge management and transport. To achieve this goal, it is necessary to establish reliable indices that reflect the efficiency of sludge dewatering. However, the evaluation of sludge dewaterability is not an easy task due to the highly complex nature of sewage sludge and variations in solid-liquid separation methods. Most traditional dewatering indices fail to predict the maximum cake solids content achievable during full-scale dewatering. This paper reviews the difficulties in assessing sludge dewatering performance, and the main techniques used to evaluate dewatering performance are compared and discussed in detail. Finally, the paper suggests a new dewatering index, namely the modified centrifugal index, which is demonstrated to be an appropriate indicator for estimating the final cake solids content as well as simulating the prototype dewatering process.

[1]  P. Aarne Vesilind,et al.  The role of water in sludge dewatering , 1994 .

[2]  İ. Tosun,et al.  A new approach in assessing slurry filterability , 2007 .

[3]  W. Knocke,et al.  Use of dilatometric and drying techniques for assessing sludge dewatering characteristics , 1992 .

[4]  Duu-Jong Lee,et al.  Use of capillary suction apparatus for estimating the averaged specific resistance of filtration cake , 1994 .

[5]  S L Ong,et al.  In-situ characterization of microbial community in an A/O submerged membrane bioreactor with nitrogen removal. , 2004, Water science and technology : a journal of the International Association on Water Pollution Research.

[6]  P. A. Vesilind,et al.  Capillary suction time as a fundamental measure of sludge dewaterability , 1988 .

[7]  M. Marinetti,et al.  Relevance of expression phase in dewatering of sludge with chamber filter presses , 2009 .

[8]  S. Dentel,et al.  Shear sensitivity of digested sludge: comparison of methods and application in conditioning and dewatering. , 2009, Water research.

[9]  Chi-Hwa Wang,et al.  Theories of cake filtration and consolidation and implications to sludge dewatering , 2000 .

[10]  K. Cen,et al.  Moisture distribution in sludges based on different testing methods. , 2011, Journal of environmental sciences.

[11]  P. Vesilind,et al.  A modified capillary suction time apparatus for measuring the filterability of super-flocculated sludges , 2000 .

[12]  Philippe Coussot,et al.  Rheology of aging, concentrated, polymeric suspensions: Application to pasty sewage sludges , 2001 .

[13]  F Malpei,et al.  Assessment of rheological methods for a correlation to sludge filterability. , 2010, Water research.

[14]  P. Vesilind,et al.  Effect of sludge cell disruption on compactibility of biological sludges , 2000 .

[15]  R. Dick,et al.  Closure of "Specific Resistance Measurements: Nonparabolic Data" , 1987 .

[16]  Duu-Jong Lee,et al.  Moisture Distribution in Sludge: Effects of Polymer Conditioning , 1999 .

[17]  A. Haute,et al.  A new deduction with a larger application of the specific resistance to filtration of sludges , 1975 .

[18]  J. O. Ademiluyi,et al.  Units of specific resistance , 1984 .

[19]  B. Sørensen,et al.  Structure Compression in Cake Filtration , 1997 .

[20]  Per Moldrup,et al.  Filtration and expression of compressible cakes , 1996 .

[21]  S. Subramanian.  Digestion Processes and Their Effect on Dewatering and Bound Water Content of Sludge , 2005 .

[22]  John T. Novak,et al.  Dewatering of Sewage Sludge , 2006 .

[23]  Duu-Jong Lee,et al.  Measurement of bound water content in sludge: The use of differential scanning calorimetry (DSC) , 1995 .

[24]  M. Higgins,et al.  Understanding Factors Affecting Polymer Demand for Conditioning and Dewatering , 2006 .

[25]  Ying Li,et al.  Comparative Investigation of Parameters for Determining the Dewaterability of Activated Sludge , 2011, Water environment research : a research publication of the Water Environment Federation.

[26]  J. Novak,et al.  Sequential polymer dosing for effective dewatering of ATAD sludges. , 2005, Water research.

[27]  Nicolas Roche,et al.  Rheological measurements of sewage sludge for various solids concentrations and geometry , 2006 .

[28]  J. Vaxelaire,et al.  Moisture distribution in activated sludges: a review. , 2004, Water research.

[29]  P. Aarne Vesilind,et al.  Treatment and disposal of wastewater sludges , 1974 .

[30]  Jens Aage Hansen,et al.  Mechanisms for Overdosing in Sludge Conditioning , 1993 .

[31]  Todd M. Graham,et al.  Predicting the Performance of Belt Filter Presses Using the Crown Press for Laboratory Simulation , 1999 .

[32]  J. Novak,et al.  Conditioning, filtering, and expressing waste activated sludge , 1999 .

[33]  W. J. Coumans,et al.  Determination of specific cake resistance with a new capillary suction time (CST) apparatus , 2001 .

[34]  J. Vaxelaire,et al.  Modelling of Cake Filtration: An Overview , 2007 .

[35]  R. Wu,et al.  Network strength and dewaterability of flocculated activated sludge. , 2002, Water research.

[36]  P. C. Hiemenz,et al.  Principles of colloid and surface chemistry , 1977 .

[37]  C. Forster.  Preliminary studies on the relationship between sewage sludge viscosities and the nature of the surfaces of the component particles , 1981, Biotechnology Letters.

[38]  Miklas Scholz,et al.  Review of Recent Trends in Capillary Suction Time (CST) Dewaterability Testing Research , 2005 .

[39]  O Sawalha,et al.  Assessment of Capillary Suction Time (CST) Test Methodologies , 2007, Environmental technology.

[40]  R. Dick,et al.  The rheology of activated sludge. , 1967, Journal - Water Pollution Control Federation.

[41]  J. Tomas,et al.  Expression behaviour of fine particle suspensions and the consolidated cake strength , 2001 .

[42]  R. Dick,et al.  Specific resistance measurements: nonparabolic data , 1985 .

[43]  B. Örmeci,et al.  Using Torque Rheology for the Identification of the Optimum Polymer Dose and the Best Performing Polymer , 2006 .

[44]  P. Vesilind,et al.  Effect of Sludge Water Distribution on the Liquid–Solid Separation of a Biological Sludge , 2003, Journal of environmental science and health. Part A, Toxic/hazardous substances & environmental engineering.

[45]  Cheng-fang Lin,et al.  Correlation between dewatering index and dewatering performance of three mechanical dewatering devices , 2003 .

[46]  B. Örmeci,et al.  Protocol to Measure Network Strength of Sludges and Its Implications for Dewatering , 2005 .

[47]  C. Bott,et al.  Does Bio–P Impact Dewatering after Anaerobic Digestion? Yes, and not in a good way! , 2014 .

[48]  P. Vesilind,et al.  Limits of sludge dewaterability , 1997 .

[49]  C. Visvanathan,et al.  Water, Wastewater, and Sludge Filtration , 2020 .

[50]  J. Lai,et al.  Co-conditioning and dewatering of alum sludge and waste activated sludge. , 2004, Water science and technology : a journal of the International Association on Water Pollution Research.

[51]  H. W. Campbell,et al.  The Use of Rheology for Sludge Characterization , 1982 .

[52]  L. Spinosa,et al.  Technological Characterization of Sewage Sludge , 1985 .

[53]  Mohammad Abu-Orf,et al.  Rheology as Tool for Polymer Dose Assessment and Control , 1999 .

[54]  Steven K. Dentel,et al.  Evaluation and role of rheological properties in sludge management , 1997 .

[55]  Raimund Bürger,et al.  Phenomenological model of filtration processes: 1. Cake formation and expression , 2001 .

[56]  Ayse Filibeli,et al.  Rheological characterization of sludges during belt filtration dewatering using an immobilization cell. , 2010 .

[57]  T. M. Keinath,et al.  Influence of particle size on sludge dewaterability , 1978 .

[58]  Richard J Wakeman,et al.  Separation technologies for sludge dewatering. , 2007, Journal of hazardous materials.

[59]  A. Kouzeli-Katsiri,et al.  Bound water content of biological sludges in relation to filtration and dewatering , 1987 .

[60]  J. Jansen,et al.  Improvement of separation and dewatering of activated sludge by using enhanced biological removal process over chemical phosphorus precipitation , 2006 .

[61]  O. Thas,et al.  Influence of Polyelectrolyte Characteristics on Pressure-Driven Activated Sludge Dewatering , 2005 .

[62]  P. Aarne Vesilind,et al.  Estimation of Sludge Centrifuge Performance , 1970 .

[63]  M. Scholz,et al.  Modeling the relationship between capillary suction time and specific resistance to filtration , 2010 .

[64]  Mohammad Abu-Orf,et al.  Measuring Sludge Network Strength Using Rheology and Relation to Dewaterability, Filtration, and Thickening¿Laboratory and Full-Scale Experiments , 2005 .

[65]  Khagendra Bahadur Thapa,et al.  Application of filtration aids for improving sludge dewatering properties – A review , 2011 .

[66]  D. J. Lee,et al.  Capillary suction time (CST) as a measure of sludge dewaterability , 1996 .

[67]  D. J. Lee,et al.  Measurement of bound water in sludges: A comparative study , 1995 .

[68]  J. Carberry,et al.  Flocculation Effects on Bound Water in Sludges as Measured by Nuclear Magnetic Resonance Spectroscopy , 1985, Applied and environmental microbiology.

[69]  J. Vaxelaire,et al.  Conditioning for Municipal Sludge Dewatering. From Filtration Compression Cell Tests to Belt Press , 2006 .

[70]  J. Novak,et al.  MIXING INTENSITY AND POLYMER DOSING IN FILTER PRESS DEWATERING , 1991 .

[71]  Wei Qiao,et al.  Possible solutions for sludge dewatering in China , 2010 .

[72]  Kung-cheh Li,et al.  Assessment of sludge dewaterability using rheological properties , 2003 .

[73]  Duu-Jong Lee,et al.  Continuous Classification of Moisture Content in Waste Activated Sludges , 1997 .

[74]  B. Ormeci.  Optimization of a full-scale dewatering operation based on the rheological characteristics of wastewater sludge. , 2007, Water research.

[75]  S. Dentel,et al.  Effect of mixing on the rheological characteristics of conditioned sludge: full-scale studies , 1997 .

[76]  Xiaoping Lu,et al.  A review on the dewaterability of bio-sludge and ultrasound pretreatment. , 2004, Ultrasonics sonochemistry.

[77]  N. Dichtl,et al.  Rheology and dewaterability of municipal sewage sludge , 2007 .

[78]  Tao Bai,et al.  Dewaterability of waste activated sludge with ultrasound conditioning. , 2009, Bioresource technology.

[79]  Jes la Cour Jansen,et al.  The effect of operational temperature on dewatering characteristics of digested sludge , 2006 .

[80]  Li-Ming Shao,et al.  Stratification structure of sludge flocs with implications to dewaterability. , 2008, Environmental science & technology.

[81]  A. Erdinçler,et al.  The role of compactibility in liquid-solid separation of wastewater sludges. , 2006, Water science and technology : a journal of the International Association on Water Pollution Research.

[82]  C. Chu,et al.  Experimental analysis of centrifugal dewatering process of polyelectrolyte flocculated waste activated sludge. , 2001, Water research.

[83]  Maryla Smollen,et al.  Evaluation of Municipal Sludge Drying and Dewatering with Respect to Sludge Volume Reduction , 1990 .

[84]  D. Lecomte,et al.  Simultaneous heat-flow differential calorimetry and thermogravimetry for fast determination of sorption isotherms and heat of sorption in environmental or food engineering , 2004 .

[85]  D. G. Allen,et al.  A review of the properties of biosludge and its relevance to enhanced dewatering processes , 2013 .

[86]  Mohammad Abu-Orf,et al.  Laboratory and full-scale studies of liquid stream viscosity and streaming current for characterization and monitoring of dewaterability , 1995 .

[87]  R. Dick,et al.  Measurement of Activated Sludge Rheology , 1985 .