Investigation of oscillations in a 6.5-kV, 1-kA SiC diode module

SiC technology is attractive for power devices, as it potentially offers many advantages over traditional Si-based devices. However, many issues still need to be properly addressed in order to become a popular and cost-effective alternative to Si devices. One of these issues are high-frequency oscillations that appear during commutation, which limit the switching speed of the device and can produce undesired EMC problems. This paper analyzes the source of the oscillations that appear during the turn-off transient of a recently developed SiC PiN diode module (6.5 kV, 1 kA). A behavioral model derived from the device characterization was elaborated and verified. Through simulation, the main ringing sources are identified and assessed. The positive effect of an RC snubber circuit for dampening the oscillations is presented and experimentally verified.

[1]  J. Gafford,et al.  Stability Considerations for Silicon Carbide Field-Effect Transistors , 2013, IEEE Transactions on Power Electronics.

[2]  S. Bernet,et al.  Characterization of a new 6.5 kV 1000A SiC diode for medium voltage converters , 2012, 2012 IEEE Energy Conversion Congress and Exposition (ECCE).

[3]  J. Fabre,et al.  Electrical Analysis and Packaging Solutions for High-Current Fast-Switching SiC Components , 2012, 2012 7th International Conference on Integrated Power Electronics Systems (CIPS).

[4]  I. Josifovic,et al.  Improving SiC JFET Switching Behavior Under Influence of Circuit Parasitics , 2012, IEEE Transactions on Power Electronics.

[5]  Olayiwola Alatise,et al.  The Impact of Parasitic Inductance on the Performance of Silicon–Carbide Schottky Barrier Diodes , 2012, IEEE Transactions on Power Electronics.

[6]  Z. Krzeminski,et al.  Performance comparison of SiC Schottky diodes and silicon ultra fast recovery diodes , 2011, 2011 7th International Conference-Workshop Compatibility and Power Electronics (CPE).

[7]  W. Bartsch,et al.  6.5 kV SiC PiN Diodes with Improved Forward Characteristics , 2010 .

[8]  Yongsug Suh,et al.  Parallel Connection of Integrated Gate Commutated Thyristors (IGCTs) and Diodes , 2009, IEEE Transactions on Power Electronics.

[9]  Dushan Boroyevich,et al.  Modeling and simulation of 2 kV 50 A SiC MOSFET/JBS power modules , 2009, 2009 13th European Conference on Power Electronics and Applications.

[10]  Munaf Rahimo,et al.  Freewheeling diode reverse-recovery failure modes in IGBT applications , 2001 .

[11]  A. H. Bonnett,et al.  Analysis of the impact of pulse-width modulated inverter voltage waveforms on AC induction motors , 1994, Proceedings of IEEE Pulp and Paper Industry Conference.

[12]  J. Lutz,et al.  Power Device-Induced Oscillations and Electromagnetic Disturbances , 2010 .

[13]  Hans-Peter Nee,et al.  Minimizing oscillations in the Diode-Less SiC JFET Inverter Bridge , 2002 .