Robust Polymer Planar Bragg Grating Sensors Embedded in Commercial-Grade Composites

This contribution demonstrates the functionality of polymer planar Bragg grating (PPBG) sensors integrated into commercial-grade carbon fiber reinforced polymer (CFRP) components. Multiple CFRP specimens are generated by curing a stack of pre-impregnated fibers inside of a heated mechanical press, exposing the polymer sensor to a pressure of 7 bar and a temperature of 120 °C for 2 h. After integration, the sensor still exhibits a strong and evaluable signal. Subsequent flexural experiments reveal a linear response of the integrated sensor’s Bragg wavelength to the CFRP specimen’s maximum deflection. Additional findings demonstrate that the embedded PPBG can be used to detect plastic deformations of a CFRP workpiece, whereas a linear correlation of plastic deformation to the resulting Bragg signal offset is determined. A plausibility check of the obtained results is delivered by a comparison of three-point flexural experiments on bulk CFRP workpieces, without integrated sensors and additional specimens featuring external optical sensors affixed to their surface. It is found that PPBGs based on cyclic olefin copolymers are able to overcome the temperature-related limitations of traditional polymer-based optical sensors and can thus be directly integrated into commercial-grade composites during production.

[1]  Leif A. Carlsson,et al.  Experimental characterization of advanced composite materials , 1987 .

[2]  Dahsin Liu,et al.  Interlayer shear slip theory for cross-ply laminates with nonrigid interfaces , 1992 .

[3]  明宏 広瀬,et al.  Fiber Bragg Gratingを用いた水中音波の検出 , 1998 .

[4]  G. Khanarian.  Optical properties of cyclic olefin copolymers , 2001 .

[5]  L M Sim,et al.  Damage detection and assessment in fibre-reinforced composite structures with embedded fibre optic sensors-review , 2002 .

[6]  W. Cantwell,et al.  Use of conventional optical fibers and fiber Bragg gratings for damage detection in advanced composite structures: A review , 2003 .

[7]  Y. C. Chan,et al.  Investigation on bondability and reliability of UV-curable adhesive joints for stable mechanical properties in photonic device packaging , 2004, Microelectron. Reliab..

[8]  John Summerscales,et al.  Low-pressure (vacuum infusion) techniques for moulding large composite structures , 2005 .

[9]  Heinz E. Pettermann,et al.  Fiber Reinforced Laminates: Progressive Damage Modeling Based on Failure Mechanisms , 2008 .

[10]  D. Webb,et al.  Humidity insensitive TOPAS polymer fiber Bragg grating sensor. , 2011, Optics express.

[11]  Joris Degrieck,et al.  Strain Measurements of Composite Laminates with Embedded Fibre Bragg Gratings: Criticism and Opportunities for Research , 2010, Sensors.

[12]  K. Peters.  Polymer optical fiber sensors—a review , 2010 .

[13]  B Schmauss,et al.  Planar Bragg grating in bulk polymethylmethacrylate. , 2012, Optics express.

[14]  Asifuz Zaman,et al.  A review on FRP composites applications and durability concerns in the construction sector , 2013 .

[15]  Elodie Péronnet,et al.  Damage investigation in CFRP composites using full-field measurement techniques: Combination of digital image stereo-correlation, infrared thermography and X-ray tomography , 2013 .

[16]  Patrice Mégret,et al.  Fiber Bragg Grating Sensors toward Structural Health Monitoring in Composite Materials: Challenges and Solutions , 2014, Sensors.

[17]  Bernhard Schmauss,et al.  Fabrication and characterization of planar Bragg gratings in TOPAS polymer substrates , 2015 .

[18]  Ralf Hellmann,et al.  Simultaneous 2D Strain Sensing Using Polymer Planar Bragg Gratings , 2015, Sensors.

[19]  Ginu Rajan,et al.  Structural Health Monitoring of Composite Structures Using Fiber Optic Methods , 2016 .

[20]  R. Hellmann,et al.  Flexible Polymer Shape Sensor Based on Planar Waveguide Bragg Gratings , 2016, IEEE Photonics Technology Letters.

[21]  Bernhard Schmauss,et al.  Influence of the UV dosage on planar Bragg gratings in cyclo-olefin copolymer substrates , 2016 .

[22]  Gang-Ding Peng,et al.  Fabrication of Polymer Optical Fibre (POF) Gratings , 2017, Sensors.

[23]  M. Rakočević.  Bending of Laminated Composite Plates in Layerwise Theory , 2017 .

[24]  M. Ayatollahi,et al.  Elastic-damage deformation response of fiber-reinforced polymer composite laminates with lamina interfaces , 2017 .

[25]  Joris Degrieck,et al.  Flexible thin polymer waveguide Bragg grating sensor foils for strain sensing , 2017, OPTO.

[26]  B. Schmauss,et al.  Two-dimensional interferometric characterization of laser-induced refractive index profiles in bulk Topas polymer , 2018 .

[27]  S. Ri,et al.  Interlaminar Shear Behavior of Laminated Carbon Fiber Reinforced Plastic from Microscale Strain Distributions Measured by Sampling Moiré Technique , 2018, Materials.

[28]  S. Kefer,et al.  High-temperature stable and sterilizable waveguide Bragg grating in planar cyclo-olefin copolymer. , 2018, Optics letters.

[29]  S. Misra,et al.  Multi-Core Optical Fibers With Bragg Gratings as Shape Sensor for Flexible Medical Instruments , 2019, IEEE Sensors Journal.

[30]  S. Ručevskis,et al.  Damage Detection in Carbon Fibre Reinforced Composites Using Electric Resistance Change Method , 2019, IOP Conference Series: Materials Science and Engineering.