In situ light-scattering measurements of morphologically evolving flame-synthesized oxide nanoaggregates.

Nonspherical Al2O3 aggregates produced in a laminar counterflow nonpremixed methane flame were investigated with an in situ laser light-scattering (LLS) technique in combination with a thermophoretic sampling-transmission electron microscope (TS-TEM) method. These flame-synthesized nanoparticles clearly underwent morphological changes following their formation (from precursor trimethylaluminum hydrolysis), mainly as a result of aggregation and sintering processes in the approximately 3.3 x 10(4) K/s heating environment. To characterize this particulate morphological evolution conveniently we made multiangular absolute LLS measurements and interpreted them based on the Rayleigh-Debye-Gans scattering theory for fractal aggregates. Optically determined fractal dimension D(f), mean radius of gyration, aggregate size distribution, and local particle volume fraction phi(p) were found to be consistent with our independent ex situ TS-TEM experiments. D(f) (optically inferred) increased from 1.60 to 1.84 with axial position, confirming the morphological evolution of alumina aggregates owing to finite-rate, spatially resolved high-temperature sintering. An extension of our TS-TEM method was successfully applied, for the first time to our knowledge, to inorganic particles. Phi(p) inferred by means of this ex situ technique generally agreed with that from the in situ LLS technique, supporting our interpretation of both measurements. Moreover, an optically inferred net sintering rate of alumina aggregates approaching the flame was estimated to be consistent with the available TEM data. The LLS methods and results presented here are expected to permit more comprehensive mechanistic analyses of nanoaggregate sintering and coagulation kinetics in such flame environments, ultimately improving the modeling of more-complex (e.g., turbulent, high-pressure) combustion systems involving nanoparticle formation and evolution.

[1]  Extended characterization of combustion-generated aggregates: Self-affinity and lacunarities , 1996 .

[2]  Kirk A. Fuller,et al.  Light Scattering by Agglomerates: Coupled Electric and Magnetic Dipole Method , 1994 .

[3]  Ümit Özgür Köylü.  Quantitative analysis of in situ optical diagnostics for inferring particle/aggregate parameters in flames : Implications for soot surface growth and total emissivity , 1997 .

[4]  D. E. Rosner,et al.  Thermophoretic Effects on Particles in Counterflow Laminar Diffusion Flames , 1993 .

[5]  Christopher M. Sorensen,et al.  The Morphology of Macroscopic Soot , 1996 .

[6]  James W. Gentry,et al.  Structural analysis of soot agglomerates , 1987 .

[7]  R. J. Hall,et al.  Fractal properties of soot agglomerates , 1991 .

[8]  J. Katz,et al.  Ultrafine refractory particle formation in counterflow diffusion flames , 1992 .

[9]  G. D. Ulrich,et al.  Theory of Particle Formation and Growth in Oxide Synthesis Flames , 1971 .

[10]  Constantine M. Megaridis,et al.  Morphology of flame-generated soot as determined by thermophoretic sampling , 1987 .

[11]  Ümit Özgür Köylü,et al.  Optical Properties of Soot in Buoyant Laminar Diffusion Flames , 1994 .

[12]  S. Friedlander,et al.  Enhanced power law agglomerate growth in the free molecule regime , 1993 .

[13]  D. E. Rosner,et al.  Size- and Structure-lnsensitivity of the Thermophoretic Transport of Aggregated “Soot” Particles in Gases , 1991 .

[14]  Alan J. Hurd,et al.  In situ growth and structure of fractal silica aggregates in a flame , 1988 .

[15]  D. E. Rosner,et al.  Simultaneous measurements of soot volume fraction and particle size/ Microstructure in flames using a thermophoretic sampling technique , 1997 .

[16]  G. Mulholland,et al.  Cluster size distribution for free molecular agglomeration , 1988 .

[17]  D. E. Rosner,et al.  Sintering kinetics and transport property evolution of large multi-particle aggregates , 1996 .

[18]  J. Katz,et al.  Silica particle synthesis in a counterflow diffusion flame reactor , 1989 .

[19]  C. Sorensen,et al.  Light-scattering measurements of monomer size, monomers per aggregate, and fractal dimension for soot aggregates in flames. , 1992, Applied optics.

[20]  D. E. Rosner,et al.  Synthesis and restructuring of inorganic nano-particles in counterflow diffusion flames , 1996 .

[21]  D. E. Rosner,et al.  Fractal Morphology Analysis of Combustion-Generated Aggregates Using Angular Light Scattering and Electron Microscope Images , 1995 .

[22]  D. E. Rosner,et al.  Experimental studies of soot particle thermophoresis in nonisothermal combustion gases using thermocouple response techniques , 1985 .

[23]  P. Biswas,et al.  Study of the sintering of nanosized titania agglomerates in flames using in situ light scattering measurements , 1997 .

[24]  D. E. Rosner,et al.  Surface Melting of Particles: Predicting Spherule Size in Vapor-Phase Nanometer Particle Formation , 1996 .

[25]  S. Friedlander,et al.  Controlled Synthesis of Nanosized Particles by Aerosol Processes , 1993 .

[26]  Ümit Özgür Köylü,et al.  Range of validity of the Rayleigh-Debye-Gans theory for optics of fractal aggregates. , 1996, Applied optics.

[27]  C. Megaridis,et al.  Absorption and scattering of light by polydisperse aggregates. , 1991, Applied optics.

[28]  George W. Mulholland,et al.  Light scattering from simulated smoke agglomerates , 1988 .

[29]  Daniel E. Rosner,et al.  Morphological evolution of nanoparticles in diffusion flames : Measurements and modeling , 1997 .