Effect of Rotor Excitation Voltage on Steady-State Stability and Maximum Output Power of a Doubly Fed Induction Generator

The effect of rotor excitation voltage on steady-state stability and output power of a doubly fed induction generator (DFIG) is investigated. Wind turbine mechanical torque-speed characteristics, as well as generator electromagnetic torque-speed characteristics, are considered in the derivation of the steady-state stability region for the magnitude and phase angle of the rotor excitation voltage. To evaluate the maximum output power of a DFIG, detailed expressions for stator power, rotor power, stator loss, rotor loss, and electrical power are derived as functions of the generator speed and the magnitude and phase angle of the rotor excitation voltage. The effect of stator resistance on the magnitude and phase angle of the resultant optimal rotor excitation voltage, which gives maximum output power and minimum loss, is examined. Experimental results are given to demonstrate the effectiveness of the theoretical analysis.

[1]  Roberto Cárdenas,et al.  A Topology for Multiple Generation System With Doubly Fed Induction Machines and Indirect Matrix Converter , 2009, IEEE Transactions on Industrial Electronics.

[2]  L. F. Kazda,et al.  Analysis of the Steady State Performance of the Double Output Induction Generator , 1986, IEEE Transactions on Energy Conversion.

[3]  Yuan-Yih Hsu,et al.  Controller design for an induction generator driven by a variable-speed wind turbine , 2006, IEEE Transactions on Energy Conversion.

[4]  Luis Marroyo,et al.  Ride Through of Wind Turbines With Doubly Fed Induction Generator Under Symmetrical Voltage Dips , 2009, IEEE Transactions on Industrial Electronics.

[5]  Paul-Etienne Vidal,et al.  Dual Direct Torque Control of Doubly Fed Induction Machine , 2007, IEEE Transactions on Industrial Electronics.

[6]  Vivek Agarwal,et al.  Maximum Power Point Tracking Scheme for PV Systems Operating Under Partially Shaded Conditions , 2008, IEEE Transactions on Industrial Electronics.

[7]  Yuan-Yih Hsu,et al.  A Minimal Harmonic Controller for a STATCOM , 2008, IEEE Transactions on Industrial Electronics.

[8]  M. Kayikci,et al.  Reactive Power Control Strategies for DFIG-Based Plants , 2007, IEEE Transactions on Energy Conversion.

[9]  G. Tapia,et al.  Modeling and control of a wind turbine driven doubly fed induction generator , 2003 .

[10]  Massimo Vitelli,et al.  Distributed maximum power point tracking of photovoltaic arrays: Novel approach and system analysis , 2008, IEEE Transactions on Industrial Electronics.

[11]  Amit K. Jain,et al.  Wound Rotor Induction Generator With Sensorless Control and Integrated Active Filter for Feeding Nonlinear Loads in a Stand-Alone Grid , 2008, IEEE Transactions on Industrial Electronics.

[12]  W.L. Chen,et al.  Unified voltage and pitch angle controller for wind-driven induction generator system , 2008, IEEE Transactions on Aerospace and Electronic Systems.

[13]  Barry W. Williams,et al.  Predictive Current Control of Doubly Fed Induction Generators , 2009, IEEE Transactions on Industrial Electronics.

[14]  Francisco Jurado Novel fuzzy flux control for fuel-cell inverters , 2005, IEEE Transactions on Industrial Electronics.

[15]  Guillermo O. García,et al.  Adaptive Observer for Sensorless Control of Stand-Alone Doubly Fed Induction Generator , 2009, IEEE Transactions on Industrial Electronics.

[16]  Rong-Jong Wai,et al.  High-Performance Stand-Alone Photovoltaic Generation System , 2008, IEEE Transactions on Industrial Electronics.

[17]  Hirofumi Matsuo,et al.  An excellent operating point tracker of the solar-cell power supply system , 2006, IEEE Transactions on Industrial Electronics.

[18]  Barry W. Williams,et al.  Improved Control of DFIG Systems During Network Unbalance Using PI–R Current Regulators , 2009, IEEE Transactions on Industrial Electronics.

[19]  Roberto Cárdenas,et al.  Vector Control of Front-End Converters for Variable-Speed Wind–Diesel Systems , 2006, IEEE Transactions on Industrial Electronics.

[20]  Yuan-Yih Hsu,et al.  An Analytical Approach to Harmonic Analysis and Controller Design of a STATCOM , 2007, IEEE Transactions on Power Delivery.

[21]  Jan T. Bialasiewicz,et al.  Renewable Energy Systems With Photovoltaic Power Generators: Operation and Modeling , 2008, IEEE Transactions on Industrial Electronics.

[22]  Gehan A. J. Amaratunga,et al.  Long-Lifetime Power Inverter for Photovoltaic AC Modules , 2008, IEEE Transactions on Industrial Electronics.

[23]  Woei-Luen Chen,et al.  STATCOM Controls for a Self-Excited Induction Generator Feeding Random Loads , 2008, IEEE Transactions on Power Delivery.

[24]  Friedrich Wilhelm Fuchs,et al.  Current Sensor Fault Detection, Isolation, and Reconfiguration for Doubly Fed Induction Generators , 2009, IEEE Transactions on Industrial Electronics.

[25]  Roberto Cárdenas,et al.  Stability Analysis of a Wind Energy Conversion System Based on a Doubly Fed Induction Generator Fed by a Matrix Converter , 2009, IEEE Transactions on Industrial Electronics.

[26]  Hirofumi Matsuo,et al.  Novel Solar-Cell Power Supply System Using a Multiple-Input DC-DC Converter , 2006, IEEE Trans. Ind. Electron..

[27]  Wlodzimierz Koczara,et al.  Sensorless Direct Voltage Control of the Stand-Alone Slip-Ring Induction Generator , 2007, IEEE Transactions on Industrial Electronics.

[28]  Javier Poza,et al.  Three-Level NPC Converter-Based Predictive Direct Power Control of the Doubly Fed Induction Machine at Low Constant Switching Frequency , 2008, IEEE Transactions on Industrial Electronics.

[29]  Friedrich Wilhelm Fuchs,et al.  Doubly Fed Induction Generator Model-Based Sensor Fault Detection and Control Loop Reconfiguration , 2009, IEEE Transactions on Industrial Electronics.

[30]  Jan T. Bialasiewicz,et al.  Power-Electronic Systems for the Grid Integration of Renewable Energy Sources: A Survey , 2006, IEEE Transactions on Industrial Electronics.

[31]  Weidong Xiao,et al.  Real-Time Identification of Optimal Operating Points in Photovoltaic Power Systems , 2006, IEEE Transactions on Industrial Electronics.

[32]  H. Banakar,et al.  Steady-state stability analysis of doubly-fed induction generators under decoupled P–Q control , 2006 .

[33]  Nicolas Patin,et al.  Modeling and Control of a Cascaded Doubly Fed Induction Generator Dedicated to Isolated Grids , 2009, IEEE Transactions on Industrial Electronics.

[34]  J. A. Tegopoulos,et al.  Steady State Analysis of a Doubly-Fed Induction Generator under Synchronous Operation , 1989, IEEE Power Engineering Review.

[35]  Francesc Guinjoan,et al.  Energy-Balance Modeling and Discrete Control for Single-Phase Grid-Connected PV Central Inverters , 2008, IEEE Transactions on Industrial Electronics.

[36]  Wilfried Hofmann,et al.  Reactive Power Control Design in Doubly Fed Induction Generators for Wind Turbines , 2009, IEEE Transactions on Industrial Electronics.

[37]  Dong-Choon Lee,et al.  MPPT Control of Wind Generation Systems Based on Estimated Wind Speed Using SVR , 2008, IEEE Transactions on Industrial Electronics.

[38]  K. A. Nigim,et al.  Wind-energy recovery by a static Scherbius induction generator , 1981 .

[39]  Manel Jebali-Ben Ghorbal,et al.  Direct Virtual Torque Control for Doubly Fed Induction Generator Grid Connection , 2009, IEEE Transactions on Industrial Electronics.

[40]  Muammer Ermis,et al.  Double-output induction generator operating at subsynchronous and supersynchronous speeds: steady-state performance optimisation and wind-energy recovery , 1992 .

[41]  W. Hofmann,et al.  Doubly-fed full-controlled induction wind generator for optimal power utilisation , 2001, 4th IEEE International Conference on Power Electronics and Drive Systems. IEEE PEDS 2001 - Indonesia. Proceedings (Cat. No.01TH8594).

[42]  Jon Clare,et al.  Doubly fed induction generator using back-to-back PWM converters and its application to variable-speed wind-energy generation , 1996 .

[43]  Ion Boldea,et al.  Variable Speed Generators , 2005 .

[44]  Roger Gules,et al.  A Maximum Power Point Tracking System With Parallel Connection for PV Stand-Alone Applications , 2008, IEEE Transactions on Industrial Electronics.

[45]  Philippe Viarouge,et al.  Analytical determination of steady-state converter control laws for wind turbines equipped with doubly fed induction generators , 2008 .

[46]  Shiyi Shao,et al.  Stator-Flux-Oriented Vector Control for Brushless Doubly Fed Induction Generator , 2009, IEEE Transactions on Industrial Electronics.

[47]  Prasad N. Enjeti,et al.  Design of a wide input range DC-DC converter with a robust power control scheme suitable for fuel cell power conversion , 2004, Nineteenth Annual IEEE Applied Power Electronics Conference and Exposition, 2004. APEC '04..

[48]  Jin-Hong Jeon,et al.  Dynamic Modeling and Control of a Grid-Connected Hybrid Generation System With Versatile Power Transfer , 2008, IEEE Transactions on Industrial Electronics.

[49]  Roberto Cárdenas,et al.  Sensorless Control of Doubly-Fed Induction Generators Using a Rotor-Current-Based MRAS Observer , 2008, IEEE Transactions on Industrial Electronics.

[50]  Maurizio Cirrincione,et al.  A Single-Phase DG Generation Unit with Shunt Active Power Filter Capability by Adaptive Neural Filtering , 2008, IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics.

[51]  Kostas Kalaitzakis,et al.  Design of a maximum power tracking system for wind-energy-conversion applications , 2006, IEEE Transactions on Industrial Electronics.

[52]  Yuzuru Ueda,et al.  Analysis Results of Output Power Loss Due to the Grid Voltage Rise in Grid-Connected Photovoltaic Power Generation Systems , 2008, IEEE Transactions on Industrial Electronics.